GUS Belmont Credenza User manual

Belmont Credenza
Emerson Credenza
Myles Credenza
CARE & CLEANING
Clean the wood surfaces with a damp,
soft cloth, and then dry.
The base may be polished with a soft
cloth and gentle cleaner.
Do not use abrasive cleaningproducts.
Determine the height where you would
like your shelf to sit and gently screw in
the supporting pins into the 4
corresponding holes. To maximize
stability, periodically tighten the
supporting pins.
Slowly rest the shelving panel on top
of the pins. Line up the four pins with
cut-outs on the bottom of the shelving
panel.
Belmont Credenza
Emerson Credenza Myles Credenza
SHELF SUPPORTING PINS AND ADJUSTABLE SHELVINGS INSTALLATION

To adjust a door up or down,
loosen all four of the vertical
alignment screws (two per
hinge). Gently slide the door
up or down to the desired
position and tighten the
screws.
VERTICAL
To adjust adjust a door left or
right, turn both of the
horizontal alignment screws
(one per hinge) in the same
direction.
Adjustment left or right will
vary depending on the door.
HORIZONTAL
To rotate a door, turn the
horizontal alignment screw
one direction for the top
hinge, and in the opposite
direction for the bottom
hinge.
Adjustment clockwise or
counter-clockwise will vary
depending on the door.
ROTATIONAL
To adjust a door in and out
from the credenza, loosen the
depth alignment screws, then
move the door to the desired
position and tighten the
screws.
DEPTH
VERTICAL
ALIGNMENT
SCREWS
DEPTH
ALIGNMENT
SCREW
HORIZONTAL
ALIGNMENT
SCREW
DOOR ADJUSTMENTS
VERTICAL
ALIGNMENT
SCREWS
You may wish to adjust the position of
the credenza doors for level or align-
ment.
Use a Phillips screw head to tighten
and loosen screws as desired.