GVS H Series User manual

Outdoor Station
H Series - Outdoor Station With Face Recognition User Manual_V1.0
Model: H-OS18
User Manual

1
Content
Chapter 1 Overview ........................................................................................................ 3
1.1 Functions and Characteristics ............................................................................. 3
1.2 Specifications ...................................................................................................... 4
Chapter 2 Appearance and Interface ............................................................................ 5
2.1 Front View ........................................................................................................... 5
2.2 Product Dimension .............................................................................................. 6
2.3 Rear View ............................................................................................................7
Chapter 3 Installation ..................................................................................................... 9
3.1 Installation Illustration ..........................................................................................9
3.2 Installation Height .............................................................................................. 11
3.3 Wiring Diagrams ................................................................................................ 11
Chapter 4 Operation Instructions ............................................................................... 14
4.1 Calling Management Center ..............................................................................14
4.2 Unlock by Face Recognition & Code Scanning .................................................15
4.3 Unlock by PIN ....................................................................................................16
4.4 Calling ............................................................................................................... 17
Chapter 5 Setting ..........................................................................................................19
5.1 Sound Setting ....................................................................................................20
5.2 Time Setting ...................................................................................................... 21
5.3 Language Setting .............................................................................................. 21
5.4 Unlock Setting ................................................................................................... 22
5.5 Call setting .........................................................................................................24
5.6 Contact List Management ................................................................................. 25
5.7 Face management ............................................................................................ 27
5.8 Access card management ................................................................................. 28
5.9 Data synchronization (server-less mode) ..........................................................29
5.10 Data backup (server-less mode) ..................................................................... 29
5.11 Lift Control ....................................................................................................... 30
5.12 Alarm Setting ................................................................................................... 31
5.13 Engineering Setting ......................................................................................... 32

2
5.14 About ............................................................................................................... 37
Chapter 6 Appendix ......................................................................................................40

3
Chapter 1 Overview
The Outdoor station is one of the main parts in digital video door phone system. It is
connected by standard CAT 5 cable and can be used for intercom and unlocking
functions with Indoor Monitor or Guard Unit.
1.1 Functions and Characteristics
8" IPS display
Auto fill light with high luminance LED
Support multiple face detection, face tracking, live detection, mask
recognition and other functions with binocular wide dynamic&near infrared
camera and Megvii face recognition algorithm. The face recognition rate is
less than 0.5s and false recognition rate is 0.1% in a standard environment
with 10,000 person.
Unlock with nine modes: password, IC card, pushbutton, monitoring/call,
face recognition, QR code, APP, face&public password, face&access card
Compatible with cloud server management, LAN server management, no
server management and various server management modes
Support alarm input, alarm output and 12V output with 800mA MAX
Support human movement detection
Support lift linkage
Support Wiegand setting
Support door status detection and timeout alarm, disconnection alarm and
tamper alarm
Support OTA online upgrade

4
1.2 Specifications
System: Linux CPU: 2 x Cortex-A7 1.2GHz 32K
RAM: 512MB ROM: 4GB
Face Storage: 20,000
Working Parameters
Working Voltage: 18~30V
(DC24V as standard)
Static Current: <150mA (DC24V)
Working Current: <400mA (DC24V)
Working Temperature: -20°C ~ +70°C
Storage Temperature: -30°C ~ +70°C
Humidity: ≤ 95%, no condensation
Camera
Type: CMOS
Pixels: 2 Mega Pixels
FOV Field of View:
H: 61 degrees, V: 35 degrees
LED: IR 850nm + white light
Focal Distance: 4.3mm
Minimum Illuminance: ≤0.15 Lux/F2.0
Display
Type: LCD
Size: 8"
Resolution: 800*1280
Product Dimension
W/H/D: 130 x 308 x 26.50 mm

5
Chapter 2 Appearance and Interface
2.1 Front View

6
2.2 Product Dimension

7
2.3 Rear View
①
RJ45 network interface
②
Interface for power supply: DC 24V (interface for independent power supply,
working voltage DC 18~30V)
③
COM, NO, NC: Common pin, normally-open pin, and normally-closed pin.
GS: Door status detection.
① ② ③ ④
①

8
UNLOCK, GND: Unlock Push Button interface
④
WG-GND, WG-D0, WG-D1: Wiegand interface
DA, DB: RS485 interface
ALARM_IN1: Alarm input 1
ALARM_IN2: Alarm input 2
GND: GND
ALARM_OUT: Lock2 interface normally-open pin
ALARM_COM: Lock2 interface common pin
GND: GND
+12V_OUT: +12V power output

9
Chapter 3 Installation
3.1 Installation Illustration
(1) Method 1: Embedded in Wall
Step 1: Put embedded box into preformed groove and get cable out through the opening
(as shown in Picture 1). Embedded box dimension(W/H/D) is 114 x 292.5 x 38 (mm).
Step 2: After connecting cable to outdoor station, match slot on rear cover of the outdoor
station to align with snap on embedded box and snap on the outdoor station (as shown in
Picture 2).
Step 3: Fix screws at the bottom of aluminium panel (as is shown in Picture 3).
(2) Method 2: Wall-mounted
Step 1: Locate wall bracket according to the opening for cable, match 6 mounting holes
on wall bracket, drill corresponding holes in the wall, insert expansion plugs and finally
tighten the bracket with screws(as shown in Picture 1).
Step 2: After connecting cable to outdoor station, match slot on rear cover of the outdoor
station to align with snap on embedded box and snap on the outdoor station (as shown in
Picture 2).
Step 3: Fix screws at the bottom of aluminium panel (as is shown in Picture 3).

10
(3) Mode 3: Column
It’s required to open a Φ33mm hole in the device that customer provided, get the cable
between customer-supplied device and the host out through opening, and then get cable
out through the column. Assemble the column and gum a waterproof sticker to the fixed
part of the column and column bracket (as shown in Picture 1).
Step 2: Fix column bracket to the column with screws and attach waterproof foam to the
end of column bracket (as shown in Picture 2).
Step 3: The wall bracket shall be screwed to column bracket (as shown in Picture 3).
Step 4: Fix screws at the bottom of aluminium panel (as is shown in Picture 4).
Step 5: Pass the column through the hole opened in customer-supplied device and fix
the column to it with column fixing nut.

11
3.2 Installation Height
Recommended Installation Height: 1.6 meters
3.3 Wiring Diagrams
(1) Wiring for Signal Unlock Mode

12
Wiring for normally closed type lock(Magnetic Lock)
Wiring for normally open type lock(Electronic lock)
Note: If device is used for power supply under signal unlock mode, the device can only
be powered by extra power supply. At the mean time, lock input current shall be less than
800mA, otherwise the equipment may be damaged.
(2) Wiring for Exit Button Unlock Mode
Note: This wiring is not polarised.
(3) Wiring for Door Status Alarm
Pushbutton(NO)

13
Normally closed type
Note: The door status alarm function can be switched off in two ways.
1Grounding GS port of the host.
2Enter "Door Status Alarm" and turn off the door status alarm switch.

14
Chapter 4 Operation Instructions
(1) Initialisation: When the device is first powered up, user needs to select the language
(Simplified Chinese, Traditional Chinese, English) and working mode (Cloud Server
Mode, Local Server Mode, No Server Mode).
Notes:
1To change operation mode, please click on Restore Factory Settings within 60s of
re-powering to re-select it.
2Enter local server address (computer IP + port 8103, e.g. 10.0.0.1:8103) when Local
Server Mode is chosen. If there is a port conflict at site, please contact technical support
to work with the developer to change port number, and modified port number will prevail.
(2) All functions in main screen can be turned on or off in Setting.
4.1 Calling Management Center
Interface of Calling Management Center
By clicking on main screen, user can call the management center and the device
will ring back. If there is no answer from the management center within 30s, call will be
automatically terminated.

15
4.2 Unlock by Face Recognition & Code Scanning
Interface of Face Recognition & Code Scanning
After clicking on main screen, Outdoor Station scans face or unlocking QR code
and after identifying it as correct, door unlocks.
Note:
1When registered users approach the Outdoor Station with their face facing device
camera, it automatically enters face recognition function to unlock the door.
2The unlocking QR code is generated by mobile APP.

16
4.3 Unlock by PIN
Interface of Unlock (public PIN/unlock PIN, resident PIN)
User clicks on main screen and enters public PIN/unlock PIN/resident PIN.
1Public PIN: The door will be unlocked when user enters public PIN and it is
recognised as correct. The default public PIN is 666666, which can be changed in
"Setting - Unlock Setting".
2Unlock PIN: The door will be unlocked when user enters unlock PIN and it is
recognised as correct. The unlock PIN is generated by mobile APP.
3Resident PIN: The door will be unlocked when user enters room number&resident
PIN and they’re recognised as correct. The default resident PIN is 666666, which can be
changed in Indoor Monitor. For example, if a resident lived in Block 1, Unit 1, 101, uses
resident PIN to unlock the door by Outdoor Station at Block 1, Unit 1, then enter the room
number 101 and the password 666666.
Note:
1Click to switch from public PIN/unlock PIN screen to resident PIN screen, and
can click again to switch back. Public PIN unlocking, unlock PIN unlocking and
resident PIN unlocking can all be switched on or off in Setting.
2When the Outdoor Station is used as a villa outdoor station and users can use
resident PIN to unlock the door, there is no need to enter room number, only the resident
PIN.
3No unlock PIN unlocking function in No Server Mode.

17
4.4 Calling
Interface of Contact List (outdoor station/gate station), Interface of Dialing (outdoor station/gate station)
Interface of Dialing(villa outdoor station)
(1) When the device is used as an outdoor station/gate station, visitors can call
corresponding household through Contact List by clicking on main interface.

18
Click in the top right corner to switch from Contact List screen to Dialing screen,
where visitor can call corresponding household by entering room number.
(2) When the device is used as a villa outdoor station, visitors can click on Call button
directly without entering room number by clicking on main interface.
Note:
1If the resident is online, device will ring back, and if the resident does not answer after
30s, the call will automatically end; if the resident is not online, device will not ring back,
indicating no answer.
2Both Contact List calls and Dialing calls can be switched on or off in Setting page.
3When Outdoor Station connects to Guard Unit or Indoor Monitor, the Guard Unit or
Indoor Monitor can control to unlock the Outdoor Station.