Ansee LK-01A User manual
LK-01A
Smart Exit Button
This smart exit button works as access controller. It can connect to one or two magnetic
lock. By connecting with wireless keypad through radio frequency, user can control door
locally through password or ID card. After adding the exit button to Ansee App, user is able
to control door remotely in cellphone directly and check related unlocking records. If binding
the exit button with ansee smart IP camera, when door is opened, IP camera will take
snapshots and recording.
Supports 1ch/2ch Magnetic lock Remote controlling door and
checking records
Video access control linkage
function
Can connect to Ansee APP
(Android & IOS)
Support local unlocking and locking
Support to connect with Wireless
Keypad to control door
Features
Specifications
DC12V 2A
915M/FSK
＞ 50M (Open Area)
Compatible with traditional 86 mechanical switches
1 door ≤ 0.5A; 2 door ≤ 1A
≤ 0.1A
LK-01A(Smart Exit Button)
Model Name
Working Voltage
Wireless Frequency
Wireless Distance
Installation Method
Locking current
Unlocking current
Attentions
1. The wiring diagram of this smart exit button is the same as traditional exit button with lock.
Please do not power on in installation and dismantlement.
2. Please attention to correct connection with one lock and two lock.
1. Exit Button Interface Introduction:
This smart exit button can connect with one door or two door.
When the J2 PIN jumps on, it is in single door status, Vo or V1 can be connected.
When the J2 PIN doesn’t jump on, it is in double-door status, both V0 and V1 need to be
connected.
V0+ V0+ V0ON
V0 V1 POWER
COM0 V1+ V1- V1ON COM1 GND +12V
2. The indicator light of Magnetic lock will be off when the door is closed. When lock is in unlock
status, it will trigger automatic locking every 30s till locking successfully.
（1）Local test: after locking, it can be unlocked by pressing exit button itself or control the lock
through wireless keypad.
（2）Locking/Ulocking remotely：after adding exit button to Ansee App, user is able to control
door remotely in cellphone directly and check related unlocking records. For more information,
please check the App operating instructions
Remote unlocking password: 1234 by factory default
If you need to change the unlocking password, only wireless keyboard can be used, for more
information, please check the wireless keyboard operating instructions
Ansee Co. Ltd Tel: 0755-86521099/86522966
Email：[email protected]
Fax：0755-26984949
Web: www.anseetec.com
© Copyright 2016. * All Rights Reserved*Design and specifications are subject to change without notice.
Add: Building A, GuanLong First Industry Park,
XiLi Town, NanShan District, Shenzhen, China
(518055)
Directions for Use
