Gyrocopters HOVER KART X4 User manual

User Manual

Hoverkart is an accessory that transforms your hoverboard into a Hover seat, three-wheeled
vehicle that is stable and maneuverable.
HOVERKART Features:
1. Compatible with 6.5-inch, 8-inch, 8.5 inch and 10 inch two-wheeled hoverboards
2. The HOVERKART comes with dual shock absorber and a 6-inch tire, which makes it good
for off-road rides, along with excellent balance ability and control performance, it is a
more enjoyable experience
How to set up:
1. Attach the wheel to the pedal frame (figure 1) using four of the provided M8 screws.
Separately put each screw into the four holes on the pedal frame with M8 lock nuts and
washers through each, attaching the wheel on the other side of the frame (figure 2).
a. In order to do this, hold each screw in place with the provided Allen key as you
tighten the nut for each screw on the other side
2. Direction control lever: separately put the direction control lever into the base (figure 3)
making sure the holes align for both sides. Then put the remaining M8 screw and lock
nut through the holes, tightening the M8 nut with the wrench and Allen key, as done in
step one (figure 4). Match the right handle bar to the right side, double-checking by
making sure the arm bend in each arm faces inward.
Figure 1
Figure 2

3. Unclasp the “Quick Release” of the base stand (figure 5), then insert the assembled
pedal frame into it and adjust the length as desired, using the “Quick Release” again to
tighten firmly
4. Attaching the seat: line up the seat with the corresponding holes on the base between
the handle bars, putting a M6-6x14 screw in each hole, securing with the nuts and
tightening with the Allen key and wrench (figure 6 & 7)
Figure 3
Figure 4

5. Use the straps (figure 8 & 9) to attach the assembled HOVERKART to your desired
hoverboard and once the full assembly is complete (figure 10), begin riding!
HOVERKART Adjustable Length
HOVERKART Use
1. Forward: Push steering handle bars down to go ahead
2. Backward: pull steering handle bars up to go back, or brake
Figure 10

3. Turn left: pull left steering handle bar up and push the right bar down
4. Turn right: pull right steering handle bar up and push the left bar down
WARNING
1. Make sure hoverboard is turned off before attaching HOVERKART and sitting
2. Make sure the environment is safe for riding. Please make sure all bolts are properly
tightened and there are no loose parts before using the HOVERKART. It MUST be
secured with the provided Velcro straps and make sure the tire pressure is
appropriate
3. MUST wear a helmet, knee pads, elbow pads, wrist guard, and exercise full caution
when driving, be prepared to stop
4. Must be age 4+ for usage with adult supervision
Customer Service
If you have any issues or questions, feel free to contact us:
[e-mail]