Häfele Smart ZigBee switch User manual

Smart ZigBee switch
User manual
Please read the instruction manual carefully before using the product.
Häfele Smart Living

2. Packing list
- Switch x1
- Screw set x1
- Manual x1
Product name
Input Voltage
Max. power
Lifetime
Wireless connection
Smart ZigBee switch
AC100-240 V/ 50-60 Hz
3-500 W/Gang
100,000 cycles
ZigBee 2.4 GHz
1. Product specification

3. Product description
This Smart ZigBee switch is suitable for all commonly used
room lights, such as incandescent lamps, fluorescent lamps
and LED lights.
LED indicator on button
a. When the light switch is on, the button shows a
blue indicator
b. Short press the button to turn on or off a light, long
press the button for app pairing mode
c. In pairing mode with a mobile phone app, the button
will flash quickly.
d. When the switch successfully connected to the mobile
phone app, the button stops flashing.

4. Wiring Schematic
1. Live Wire Connect to " " terminal
2. Lamp connect to " , , " terminal
Note: Neutral Wire is NOT required
L
IN
L1
OUT L2 OUT L3
OUT
L3
OUT
L2
OUT
L1
OUT IN
L
ZigBee Switches
without Neutral
(L Switches)
L
N
L: Live line
N: Neutral line

1. Carefully use a small slotted screwdriver to open the
face shell as shown in the picture.
Caution: Avoid damaging the metal frame and inside of glass.
2. Fix the bottom shell to the wall box with screws.
(wall box is NOT included)
3. Connect the face shell to the bottom shell again.
5. Installation

Häfele Smart Living
6. Preparation for use
1. Download and open the APP
In the App Store, search for “Hafele Smart Living” or scan
the QR code of manual to download and install the smart APP.
If you are downloading this APP for the
first time, please tap the “Sign up” button
to register your account. If you are already
have an account, click the “Login” button.
2. Make sure the Smart Gateway has been added first.
3. Mobile phone is connected to Wi-Fi 2.4 GHz of your router
Ensure the smart switch is within wireless range of the Gateway
to ensure a successful connection between the switch and the
gateway.
Smart phone Smart gateway
Wifi router

7. Network setting
1. Open the APP, select gateway and tap “Add sub-device”
on the gateway screen.
2. Long press one of the buttons on the switch panel until
the LED indicator flashes quickly.
3. Once the smart switch successfully connects, the light
will turn off.
+
Add subdevice
You haven’t create any device yet.
Tap ‘Add’ to start.
Added devices

7. Network setting
4. Press “Done” to go back to the main screen. Touch the
smart switch icon to test the newly added device.

8. Safety information
1. Please ensure to cut off the main power before touching
any cables for installation or uninstallation
2. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference,
and
(2) This device must accept any interference received,
including interference that may cause undesired
operation