H2O H2O-56SE-R-48 User manual

H2O-56SE-R-48
1. Media Loading Instructions
ION
EXCHANGE
RESIN
Funnel
Fill to here
12-18” of
free space
Resin Tank
1 2
Riser Tube
Basket Distributor
Funnel
Fill to here
GRAVEL MEDIA
Control Valve
Brine Tank
3 4
The riser tube should be
centered in the bottom of the
tank. There is a divet in the
bottom of the tank that the
basket distributor on the end
of the riser tube will fit in. The
top of the riser tube should
be flush with the very top of
the tank.
Use a piece of tape to cover
the riser tube while adding
media to the tank. You do
not want any media getting
into the riser tube. Place the
funnel in opening at the top of
the tank. Pour media into the
tank using the funnel.
Fill the tank with 1.5 cubic
feet of softening resin media.
After filled, remove the
funnel and tape covering the
opening of the riser tube.
Clean up the riser, tank
threads and top of the tank
before installing the control
valve.
Thread the control valve
on to the top of the tank.
The control should thread
on easily. If you feel any
abnormal resistance, check
to make sure the control is
not cross threaded.
The system is now assembled
and ready for installation.

2. Valve & Bypass Components
3. Plumbing Connection & Startup
1. Connect plumbing to the system with the bypass knobs in the bypass
position (perpendicular to the plumbing). Turn on the water to the house and
check all connections for leaks.
2. ,QLWLDWHWKHEDFNZDVKF\FOHRQWKH¿OWHUYDOYH7KLVLVGRQHE\SUHVVLQJWKH
GLDPRQGVKDSHGEXWWRQRQWKHIDFHRIDGLJLWDOYDOYH7KHEDFNZDVKF\FOH
LVLQLWLDWHGRQDPHFKDQLFDOYDOYHE\WXUQLQJWKHGLDOFORFNZLVHWRWKH¿UVW
position.
3. 2QFHWKHYDOYHLVLQWKHEDFNZDVKPRGHRSHQWKHE\SDVVKDQGOHVKDOIZD\
DQGDOORZWKHWDQNWR¿OOZLWKZDWHU
4. 2SHQWKHE\SDVVYDOYHVDOOWKHZD\RQFHZDWHUEHJLQVWRÀRZWKURXJKWKH
drain tube.
5. Allow system to complete the backwash and regeneration cycles on its own.
,WZLOOUHWXUQWRVHUYLFHRQFHWKLVLVGRQH
*Note: The system should be ready for use once the backwash cycle is
FRPSOHWH<RXPD\KDYHWRLQLWLDWHDVHFRQGEDFNZDVKF\FOHRQYHU\ODUJH
V\VWHPVLIWKHUHLVDGLVFRORUDWLRQWRWKHZDWHU,WLVQRUPDOWRVHHYHU\VPDOODLU
bubbles in the water when new systems are installed. These tiny bubbles can
JLYHWKHZDWHUDJUH\LVKFDVW+RZHYHUWKH\GRTXLFNO\GLVVLSDWHLQDFOHDUJODVV
These bubbles will go away once the system becomes thoroughly saturated. This
FRXOGWDNHVHYHUDOGD\VGHSHQGLQJXSRQZDWHUXVDJH