H3C S3610 Series User manual

H3C S3610&S5510 Series Ethernet Switches
Operation Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: 6W100-20090430
Product Version: Release 5309

Copyright © 2009, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior
written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care, , TOP G, , IRF, NetPilot, Neocean, NeoVTL,
SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT,
XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co.,
Ltd.
All other trademarks that may be mentioned in this manual are the property of their respective owners.
Notice
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Technical Support
[e-mail]
http://www.h3c.com

About This Manual
Organization
H3C S3610&S5510 Series Ethernet Switches Operation Manual-Release 5309 is organized as follows:
Volume Features
00-Product
Overview Product Overview Acronyms
Ethernet Port Link Aggregation Port Isolation Service Loopback
Group
DLDP LLDP Smart Link Monitor Link
VLAN GVRP QinQ BPDU Tunneling
VLAN Mapping Ethernet OAM Connectivity
Fault Detection MSTP
01-Access
Volume
RRPP Port Mirroring
IP Addressing ARP DHCP DNS
IP Performance
Optimization UDP Helper IPv6 Basics Dual Stack
02-IP Services
Volume
Tunneling sFlow
IP Routing
Overview Static Routing RIP OSPF
IS-IS BGP
IPv6 Static
Routing RIPng
OSPFv3 IPv6 IS-IS IPv6 BGP Route Policy
03-IP Routing
Volume
BFD MCE
Mulitcast Overview Multicast Routing
and Forwarding IGMP PIM
04-Multicast
Volume MSDP IGMP Snooping Multicast VLAN MLD Snooping
05-QoS Volume QoS
AAA 802.1X HABP MAC Authentication
System-Guard Port Security IP Source Guard SSH2.0
06-Security
Volume PKI SSL ACL
Login Basic System
Configuration Device Management File System Management
HTTP SNMP RMON
MAC Address
Table Management
System
Maintaining and
Debugging
Information
Center Track NQA
NTP VRRP
Cluster
Management Stack Management
07-System
Volume
GR Overview Automatic
Configuration

Conventions
The manual uses the following conventions:
Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by vertical bars.
One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets and
separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by vertical bars.
A minimum of one or a maximum of all can be selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets and
separated by vertical bars. Many or none can be selected.
&<1-n> The argument(s) before the ampersand (&) sign can be entered 1 to n
times.
# A line starting with the # sign is comments.
GUI conventions
Convention Description
Boldface Window names, button names, field names, and menu items are in
Boldface. For example, the New User window appears; click OK.
> Multi-level menus are separated by angle brackets. For example, File >
Create > Folder.
Symbols
Convention Description
Means reader be extremely careful. Improper operation may cause
bodily injury.
Means reader be careful. Improper operation may cause data loss or
damage to equipment.
Means an action or information that needs special attention to ensure
successful configuration or good performance.
Means a complementary description.
Means techniques helpful for you to make configuration with ease.

Related Documentation
In addition to this manual, each H3C S3610&S5510 Series Ethernet Switch documentationset includes
the following:
Manual Description
H3C S3610 Series Ethernet Switches
Installation Manual
It introduces the installation procedure,
commissioning, maintenance and monitoring of
the S3610 Series Ethernet switches.
H3C S5510 Series Ethernet Switches
Installation Manual
It introduces the installation procedure,
commissioning, maintenance and monitoring of
the S5510 Series Ethernet switches.
H3C S3610&S5510 Series Ethernet Switches
Command Manual - Release 5309
It includes Feature List and Command Index,
Access Volume, IP Services Volume, IP Routing
Volume, IP Multicast Volume, QoS Volume,
Security Volume and System Volume
commands.
Obtaining Documentation
You can access the most up-to-date H3C product documentation on the World Wide Web at this URL:
http://www.h3c.com.
The following are the columns from which you can obtain different categories of product documentation:
[Products & Solutions]: Provides information about products and technologies, as well as solutions.
[Technical Support & Document > Technical Documents]: Provides several categories of product
documentation, such as installation, operation, and maintenance.
[Technical Support & Document > Product Support > Software]: Provides the documentation released
with the software version.
Documentation Feedback
You can e-mail your comments about product documentation to [email protected].
We appreciate your comments.