H3C S5830V2 series Installation manual

H3C S5830V2 & S5820V2 Switch Series
Fundamentals
Command Reference
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Software version: 6W100-20160130
Document version: Release 2422P01

Copyright ©2016, Hangzhou H3C Technologies Co., Ltd. and its licensors
All rights reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior written
consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , H3CS, H3CIE, H3CNE,Aolynk, , H3Care, , IRF, NetPilot, Netflow, SecEngine,
SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of Hangzhou H3C
Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their respective owners
Notice
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.

Preface
The H3C S5830V2 & S5820V2 documentation set describes the commands and command syntax
options available for the H3C S5830V2 & S5820V2 Switch Series.
The Fundamentals Command Reference describes commands that help you get started with the
device, including:
•CLI and emergency shell.
•RBAC, switch login, and switch access control.
•Management of the switch, file system, configuration files, and licenses.
•FTP and TFTP.
•Tcl and Python.
•ISSU and common software upgrade.
This preface includes the following topics about the documentation:
•Audience.
•Conventions.
•About the H3C S5830V2 & S5820V2 documentation set
•Obtaining documentation.
•Technical support.
•Documentation feedback.
Audience
This documentation is intended for:
•Network planners.
•Field technical support and servicing engineers.
•Network administrators working with the H3C S5830V2 & S5820V2 switch series.
Conventions
This section describes the conventions used in the documentation.
Port numbering in examples
The port numbers in the documentation are for illustration only and might be unavailable on your
device.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

Convention Description
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars,
from which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
[ x | y | ... ] *
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.
&<1-n> The argument or keyword and argument combination before the ampersand (&) sign
can be entered 1 to n times.
# A line that starts with a pound (#) sign is comments.
GUI conventions
Convention Description
Boldface Window names, button names, field names, and menu items are in Boldface. For
example, the New User window appears; click OK.
> Multi-level menus are separated by angle brackets. For example, File > Create >
Folder.
Symbols
Convention Description
WARNING! An alert that calls attention to important information that if not understood or followed
can result in personal injury.
CAUTION: An alert that calls attention to important information that if not understood or followed
can result in data loss, data corruption, or damage to hardware or software.
IMPORTANT: An alert that calls attention to essential information.
NOTE: An alert that contains additional or supplementary information.
TIP: An alert that provides helpful information.
Network topology icons
Convention Description
Represents a generic network device, such as a router, switch, or firewall.
Represents a routing-capable device, such as a router or Layer 3 switch.
Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that
supports Layer 2 forwarding and other Layer 2 features.
Represents an access controller, a unified wired-WLAN module, or the access
controller engine on a unified wired-WLAN switch.
Represents an access point.

Convention Description
Wireless terminator unit.
Wireless terminator.
Represents a mesh access point.
Represents omnidirectional signals.
Represents directional signals.
Represents a security product, such as a firewall, UTM, multiservice security
gateway, or load balancing device.
Represents a security card, such as a firewall, load balancing, NetStream, SSL VPN,
IPS, or ACG card.
About the H3C S5830V2 & S5820V2
documentation set
The H3C S5830V2 & S5820V2 documentation set includes the following categories of documents:
Category Documents Purposes
Hardware specifications
and installation
Compliance and safety
manual
CE DOC
Provides regulatory information and the safety
instructions that must be followed during
installation.
Quick start Guides you through initial installation and setup
procedures to help you quickly set up and use your
device with the minimum configuration.
Installation guide Provides a complete guide to hardware installation
and hardware specifications.
Fan assemblies
installation manual
Describes the appearance, specifications, and
installation and removal of hot-swappable fan
assemblies.
Power modules user
manual
Describes the appearance, specifications, and
installation and removal of hot-swappable power
modules.
Pluggable transceiver
modules installation
guide
Guides you through installing SFP/SFP+/QSFP+
transceiver modules.
Pluggable modules
manual
Describes the hot-swappable modules available for
the H3C switches, their external views, and
specifications.
T
T
T
T





Category Documents Purposes
Software configuration Configuration guides Describe software features and configuration
procedures.
Command references Provide a quick reference to all available
commands.
Operations and
maintenance
MIB Companion Describes the MIBs for the software release.
Release notes
Provide information about the product release,
including the version history, hardware and
software compatibility matrix, version upgrade
information, technical support information, and
software upgrading.
Obtaining documentation
Access the most up-to-date H3C product documentation on the World Wide Web
at http://www.h3c.com.
Click the following links to obtain different categories of product documentation:
[Technical Documents]—Provides hardware installation, software upgrading, and software feature
configuration and maintenance documentation.
[Products & Solutions]—Provides information about products and technologies, as well as solutions.
[Software Download]—Provides the documentation released with the software version.
Technical support
[e-mail]
http://www.h3c.com
Documentation feedback
You can e-mail your comments about product documentation to [e-mail].
We appreciate your comments.

i
Contents
Basic CLI commands······················································································1
command-alias enable·······························································································································1
command-alias mapping····························································································································1
display | { begin | exclude | include }··········································································································2
display | by-linenum ···································································································································3
display >·····················································································································································4
display >>···················································································································································4
display command-alias·······························································································································5
display history-command ···························································································································6
display history-command all·······················································································································6
display hotkey ············································································································································7
hotkey·························································································································································8
quit ·····························································································································································9
return··························································································································································9
screen-length disable·······························································································································10
system-view ·············································································································································10
Login management commands·····································································12
activation-key···········································································································································12
authentication-mode·································································································································13
auto-execute command····························································································································14
command accounting·······························································································································15
command authorization····························································································································16
databits·····················································································································································17
display line ···············································································································································18
display telnet client···································································································································19
display user-interface·······························································································································19
display users············································································································································21
escape-key···············································································································································22
flow-control···············································································································································23
free line ····················································································································································24
free user-interface····································································································································25
history-command max-size······················································································································26
idle-timeout···············································································································································26
line····························································································································································27
line class ··················································································································································28
lock···························································································································································29
parity ························································································································································30
protocol inbound·······································································································································31
screen-length ···········································································································································32
send ·························································································································································33
set authentication password·····················································································································34
shell··························································································································································35
speed ·······················································································································································35
stopbits·····················································································································································36
telnet ························································································································································37
telnet client source···································································································································38
telnet ipv6·················································································································································39
telnet server acl········································································································································39
telnet server dscp·····································································································································40
telnet server enable··································································································································41
telnet server ipv6 acl································································································································41
telnet server ipv6 dscp·····························································································································42
terminal type·············································································································································43
user-interface···········································································································································43
user-interface class··································································································································44
user-role···················································································································································46

ii
RBAC commands ·························································································47
description················································································································································47
display role···············································································································································47
display role feature···································································································································49
display role feature-group ························································································································51
feature······················································································································································53
interface policy deny ································································································································53
permit interface ········································································································································54
permit vlan················································································································································56
permit vpn-instance··································································································································57
role···························································································································································59
role default-role enable ····························································································································59
role feature-group·····································································································································60
rule···························································································································································61
super························································································································································65
super authentication-mode·······················································································································65
super default role ·····································································································································66
super password········································································································································67
vlan policy deny········································································································································68
vpn-instance policy deny··························································································································69
FTP commands·····························································································71
FTP server commands·····································································································································71
display ftp-server······································································································································71
display ftp-user·········································································································································71
free ftp user··············································································································································72
free ftp user-ip··········································································································································73
free ftp user-ip ipv6 ··································································································································73
ftp server acl·············································································································································74
ftp server dscp··········································································································································74
ftp server enable ······································································································································75
ftp server ipv6 dscp··································································································································75
ftp server ssl-server-policy·······················································································································76
ftp timeout ················································································································································77
FTP client commands ······································································································································77
append·····················································································································································77
ascii··························································································································································78
binary ·······················································································································································79
bye ···························································································································································79
cd ·····························································································································································80
cdup ·························································································································································81
close·························································································································································81
debug·······················································································································································82
delete ·······················································································································································83
dir·····························································································································································83
disconnect················································································································································84
display ftp client source····························································································································85
ftp·····························································································································································85
ftp client ipv6 source ································································································································86
ftp client source········································································································································87
ftp ipv6······················································································································································88
get····························································································································································89
help ··························································································································································90
lcd·····························································································································································90
ls·······························································································································································91
mkdir ························································································································································92
newer ·······················································································································································93
open·························································································································································93
passive·····················································································································································94
put····························································································································································95
pwd···························································································································································95

iii
quit ···························································································································································96
reget·························································································································································96
rename·····················································································································································97
reset·························································································································································97
restart·······················································································································································98
rhelp·························································································································································98
rmdir·······················································································································································100
rstatus ····················································································································································101
status······················································································································································102
system····················································································································································103
user························································································································································104
verbose ··················································································································································104
?·····························································································································································105
TFTP commands ························································································107
tftp··························································································································································107
tftp client ipv6 source ·····························································································································108
tftp client source·····································································································································109
tftp ipv6···················································································································································110
tftp-server acl ·········································································································································111
tftp-server ipv6 acl··································································································································112
File system management commands ·························································113
cd ···························································································································································113
copy························································································································································114
delete ·····················································································································································116
dir···························································································································································118
fdisk························································································································································119
file prompt ··············································································································································121
fixdisk·····················································································································································121
format·····················································································································································122
gunzip·····················································································································································122
gzip·························································································································································123
md5sum ·················································································································································124
mkdir ······················································································································································124
more·······················································································································································125
mount·····················································································································································126
move ······················································································································································126
pwd·························································································································································127
rename···················································································································································127
reset recycle-bin·····································································································································128
rmdir·······················································································································································129
sha256sum·············································································································································129
tar create················································································································································130
tar extract···············································································································································130
tar list······················································································································································131
umount···················································································································································132
undelete ·················································································································································133
Configuration file management commands·················································134
archive configuration······························································································································134
archive configuration interval ·················································································································134
archive configuration location·················································································································135
archive configuration max······················································································································137
backup startup-configuration··················································································································137
configuration commit······························································································································138
configuration commit delay ····················································································································139
configuration encrypt······························································································································140
configuration replace file························································································································140
display archive configuration··················································································································141
display current-configuration··················································································································142
display current-configuration diff············································································································143

iv
display default-configuration ··················································································································145
display diff··············································································································································145
display saved-configuration····················································································································147
display startup········································································································································148
display this ·············································································································································149
reset saved-configuration·······················································································································150
restore startup-configuration··················································································································151
save························································································································································152
startup saved-configuration····················································································································153
Software upgrade commands·····································································156
boot-loader file ·······································································································································156
boot-loader pex file·································································································································157
boot-loader update·································································································································159
bootrom update······································································································································160
display boot-loader·································································································································161
display boot-loader pex··························································································································162
reset boot-loader pex·····························································································································163
warm-reboot···········································································································································164
ISSU commands·························································································166
display install active ·······························································································································166
display install backup·····························································································································167
display install committed························································································································168
display install inactive·····························································································································170
display install ipe-info·····························································································································171
display install job····································································································································171
display install log····································································································································172
display install package···························································································································173
display install rollback ····························································································································174
display install which································································································································175
display issu rollback-timer······················································································································176
display issu state····································································································································176
display version comp-matrix···················································································································178
install abort·············································································································································184
install activate·········································································································································184
install add···············································································································································186
install commit ·········································································································································187
install deactivate·····································································································································188
install remove·········································································································································189
install rollback to·····································································································································189
install verify ············································································································································191
issu accept·············································································································································192
issu commit············································································································································192
issu load·················································································································································194
issu pex··················································································································································196
issu rollback ···········································································································································197
issu rollback-timer··································································································································198
issu run switchover·································································································································199
reset install log-history oldest·················································································································200
reset install rollback oldest·····················································································································201
Emergency shell commands·······································································202
copy························································································································································202
delete ·····················································································································································202
dir···························································································································································203
display copyright ····································································································································205
display install package···························································································································205
display interface m-eth0·························································································································206
display ip routing-table···························································································································207
display ipv6 routing-table ·······················································································································208
display version ·······································································································································209

v
format·····················································································································································209
ftp···························································································································································210
install load··············································································································································210
interface m-eth0·····································································································································211
ip address···············································································································································212
ip gateway··············································································································································212
ipv6 address···········································································································································213
ipv6 gateway··········································································································································213
mkdir ······················································································································································214
more·······················································································································································215
move ······················································································································································215
ping ························································································································································216
ping ipv6·················································································································································217
pwd·························································································································································217
quit ·························································································································································218
reboot·····················································································································································218
reset ssh public-key ·······························································································································218
rmdir·······················································································································································219
shutdown················································································································································220
ssh2························································································································································220
system-view ···········································································································································221
telnet ······················································································································································222
tftp··························································································································································222
Device management commands ································································223
clock datetime········································································································································223
clock protocol·········································································································································224
clock summer-time·································································································································224
clock timezone ·······································································································································226
command ···············································································································································227
copyright-info enable······························································································································227
display clock···········································································································································229
display copyright ····································································································································229
display cpu-usage··································································································································230
display cpu-usage configuration·············································································································231
display cpu-usage history·······················································································································231
display device·········································································································································233
display device manuinfo·························································································································234
display device manuinfo fan···················································································································235
display device manuinfo power··············································································································236
display diagnostic-information················································································································237
display environment·······························································································································237
display fan··············································································································································238
display memory······································································································································239
display memory-threshold······················································································································241
display power·········································································································································242
display scheduler job······························································································································242
display scheduler logfile·························································································································243
display scheduler reboot························································································································244
display scheduler schedule····················································································································244
display system stable state····················································································································245
display system-working-mode················································································································247
display transceiver alarm ·······················································································································247
display transceiver diagnosis·················································································································249
display transceiver interface···················································································································250
display transceiver manuinfo··················································································································251
display version ·······································································································································252
display version-update-record················································································································252
fan prefer-direction·································································································································253
header····················································································································································253
job ··························································································································································255
memory-threshold··································································································································256

vi
memory-threshold usage ·······················································································································257
monitor cpu-usage enable······················································································································258
monitor cpu-usage interval·····················································································································258
monitor cpu-usage threshold··················································································································259
password-recovery enable·····················································································································260
reboot·····················································································································································260
reset scheduler logfile····························································································································262
reset version-update-record···················································································································262
restore factory-default····························································································································263
scheduler job··········································································································································263
scheduler logfile size······························································································································264
scheduler reboot at ································································································································265
scheduler reboot delay···························································································································266
scheduler schedule································································································································266
shutdown-interval···································································································································267
sysname·················································································································································268
system-working-mode····························································································································269
temperature-limit····································································································································269
time at ····················································································································································270
time once················································································································································271
time repeating ········································································································································272
usb disable·············································································································································274
user-role·················································································································································274
Tcl commands·····························································································276
cli····························································································································································276
tclquit······················································································································································276
tclsh························································································································································277
Python commands······················································································278
python ····················································································································································278
python filename······································································································································278
License management commands·······························································280
display license········································································································································280
display license feature····························································································································281
display license device-id ························································································································282
license activation-file install····················································································································282
license activation-file uninstall················································································································283
license compress ···································································································································284
Index···········································································································286

1
Basic CLI commands
command-alias enable
Use command-alias enable to enable the command keyword alias function.
Use undo command-alias enable to disable the command keyword alias function.
Syntax
command-alias enable
undo command-alias enable
Default
The command keyword alias function is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Configured command keyword aliases take effect only when the command keyword alias function is
enabled.
Disabling the command keyword alias function does not delete configured aliases.
Examples
# Enable the command keyword alias function.
<Sysname> system-view
[Sysname] command-alias enable
Related commands
•command-alias mapping
•display command-alias
command-alias mapping
Use command-alias mapping to configure a command keyword alias.
Use undo command-alias mapping to delete a command keyword alias.
Syntax
command-alias mapping cmdkey alias
undo command-alias mapping cmdkey
Default
A command keyword has no alias.
Views
System view

2
Predefined user roles
network-admin
Parameters
cmdkey: Specifies the first keyword of a non-undo command or the second keyword of an undo
command. You must enter the keyword in its complete form.
alias: Specifies an alias for the keyword, a string of 1 to 20 characters. It must be different from the
first keyword of any non-undo command and the second keyword of any undo command.
Usage guidelines
You can configure an alias for the first keywordof a non-undo command or the second keyword of an
undo command. Then, when you execute a command that starts with the keyword or the undo
keyword plus the keyword, you can use the alias. For example, if you configure show as the alias for
the display keyword, you can enter show clock to execute the display clock command.
To use configured command keyword aliases, make sure the command-alias enable command is
configured.
Examples
# Define show as the alias of the display keyword.
<Sysname> system-view
[Sysname] command-alias mapping display show
Related commands
•command-alias enable
•display command-alias
display | { begin | exclude | include }
Use display | { begin | exclude | include } to filter the output froma display command with a regular
expression.
Syntax
display command |{ begin | exclude | include } regular-expression
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
command: Specifies the keywords and arguments of a display command. To display available
keywords and arguments, enter display ?.
begin: Displays the first line matching the specified regular expression and all subsequent lines.
exclude: Displays all lines not matching the specified regular expression.
include: Displays all lines matching the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

3
Usage guidelines
Use the | { begin | exclude | include } regular-expression option with a display command to filter
the command output. For more information about regular expressions, see Fundamentals
Configuration Guide.
Examples
# Display the lines that contain vlan in the running configuration.
<Sysname> display current-configuration | include vlan
vlan 1
vlan 999
port access vlan 999
display | by-linenum
Use display | by-linenum to number each output line for a display command.
Syntax
display command |by-linenum
Views
Any view
Predefined user roles
network-admin
Parameters
command: Specifies the keywords and arguments of a display command. To display available
keywords and arguments, enter display ?.
Usage guidelines
By numbering each output line from a display command, you can easily identify the lines of interest.
Each line number is displayed as a 5-character string and might be followed by a colon (:) or hyphen
(-). If you specify both | by-linenum and | begin regular-expression for a display command, a
hyphen is displayed for all lines that do not match the regular expression.
Examples
# Display CPU usage information, with each output line identified by a number.
<Sysname> display cpu-usage | by-linenum
1: Slot 1 CPU 0 CPU usage:
2: 14% in last 5 seconds
3: 14% in last 1 minute
4: 13% in last 5 minutes
# Display the first line that begins with user-group in the running configuration and all of the following
lines.
<Sysname> display current-configuration | by-linenum begin user-group
114: user-group system
115- #
116- return

4
display >
Use display >to save the output from a display command to a separate file.
Syntax
display command > filename
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
command: Specifies the keywords and arguments of a display command. To display available
keywords and arguments, enter display ?.
filename: Specifies the name of the file that is used to save the output, a string of 1 to 63 characters.
Usage guidelines
The display commands show the configuration, statistics, and states of the device. You can use the
display >command to save the output to a file.
If the specified file does not exist, the system creates the file and saves the output to the file. If the file
already exists, the system overwrites the file.
Examples
# Save CPU usage information to a separate file named cpu.txt.
<Sysname> display cpu-usage > cpu.txt
# Verify the content of the cpu.txt file.
<Sysname> more cpu.txt
Slot 1 CPU 0 CPU usage:
13% in last 5 seconds
13% in last 1 minute
13% in last 5 minutes
display >>
Use display >> to append the output from a display command to the end of a file.
Syntax
display command >> filename
Views
Any view
Predefined user roles
network-admin
network-operator

5
Parameters
command: Specifies the keywords and arguments of a display command. To display available
keywords and arguments, enter display ?.
filename: Specifies the name of the file that is used to save the output, a string of 1 to 63 characters.
Usage guidelines
The display commands show the configuration, statistics, and states of the device. You can use
display >> to save the output to a file.
If the specified file does not exist, the system creates the file and saves the output to the file. If the file
already exists, the system appends the output to the end of the file.
Examples
# Append system time information to the end of the cpu.txt file.
<Sysname> display clock >> cpu.txt
# Check the content of the cpu.txt file.
<Sysname> more cpu.txt
Slot 1 CPU 0 CPU usage:
13% in last 5 seconds
13% in last 1 minute
13% in last 5 minutes
02:03:27 UTC Tue 01/01/2013
display command-alias
Use display command-alias to display the status of the command keyword alias function and the
configured command keyword alias.
Syntax
display command-alias
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display command keyword alias information.
<Sysname> display command-alias
Command alias is enabled
Index Alias Command key
1 ping1 ping
2 ssh1 ssh
Related commands
•command-alias enable
•command-alias mapping

6
display history-command
Use display history-command to display all commands that are saved in the command history
buffer for the current CLI session.
Syntax
display history-command
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
The system automatically saves commands you have successfully executed to the command history
buffer for the current CLI session. You can view them and execute them again.
By default, the system can save up to 10 commands in the buffer. You can use the
history-command max-size command to change the buffer size.
Examples
# Display all commands saved in the command history buffer for the current CLI session.
<Sysname> display history-command
system-view
vlan 2
quit
Related commands
history-command max-size
display history-command all
Use display history-command all to display all commands saved in the command history buffer for
all CLI sessions.
Syntax
display history-command all
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
The system automatically saves commands successfully executed by users to the command history
buffer for all CLI sessions. Users can view them and execute them again.
Up to 1024 commands can be saved in the command history buffer. When this number is reached,
the system deletes the earliest commands to make room for newly executed commands.

7
Examples
# Display all commands saved in the command history buffer for all CLI sessions.
<Sysname> display history-command all
Date Time Terminal Ip User
03/16/2012 20:03:33 vty0 192.168.1.26 **
Cmd:dis his all
03/16/2012 20:03:29 vty0 192.168.1.26 **
Cmd:sys
Related commands
display history-command
display hotkey
Use display hotkey to display hotkey information.
Syntax
display hotkey
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display hotkey information.
<Sysname> display hotkey
----------------- Hotkeys -----------------
-Defined command hotkeys-
CTRL_G display current-configuration
CTRL_L display ip routing-table
CTRL_O undo debugging all
-Undefined command hotkeys-
CTRL_T NULL
CTRL_U NULL
-System-reserved hotkeys-
CTRL_A Move the cursor to the beginning of the line.
CTRL_B Move the cursor one character to the left.
CTRL_C Stop the current command.
CTRL_D Erase the character at the cursor.
CTRL_E Move the cursor to the end of the line.
CTRL_F Move the cursor one character to the right.
CTRL_H Erase the character to the left of the cursor.
CTRL_K Abort the connection request.
CTRL_N Display the next command in the history buffer.

8
CTRL_P Display the previous command in the history buffer.
CTRL_R Redisplay the current line.
CTRL_V Paste text from the clipboard.
CTRL_W Delete the word to the left of the cursor.
CTRL_X Delete all characters from the beginning of the line to the cursor.
CTRL_Y Delete all characters from the cursor to the end of the line.
CTRL_Z Return to the User View.
CTRL_] Kill incoming connection or redirect connection.
ESC_B Move the cursor back one word.
ESC_D Delete all characters from the cursor to the end of the word.
ESC_F Move the cursor forward one word.
Related commands
hotkey
hotkey
Use hotkey to assign a command to a configurable hotkey.
Use undo hotkey to restore the default.
Syntax
hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U } command
undo hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U }
Default
•Ctrl_G: display current-configuration (display the running configuration).
•Ctrl_L: display ip routing-table (display the IPv4 routing table information).
•Ctrl_O: undo debugging all (disable all debugging functions).
•Ctrl_T: No command is assigned to this hotkey.
•Ctrl_U: No command is assigned to this hotkey.
Views
System view
Predefined user roles
network-admin
Parameters
CTRL_G: Assigns a command to Ctrl+G.
CTRL_L: Assigns a command to Ctrl+L.
CTRL_O: Assigns a command to Ctrl+O.
CTRL_T: Assigns a command to Ctrl+T.
CTRL_U:Assigns a command to Ctrl+U.
command: Specifies the command to be assigned to the hotkey.
Usage guidelines
The system defines some hotkeys and provides five configurable command hotkeys. Pressing a
hotkey executes the command assigned to the hotkey.
To display system-defined and configurable hotkeys, use the display hotkey command.