Maiwe MIEN2205 User manual

Industrial Ethernet switch
Model: MIEN2205
User Manual
March, 2011(Second Publish)
Edition2.0.1

ii
Industrial Ethernet switch
MIEN2205 User manual
Before using this manual, please read the following license
agreement.
Important declaration:
TheCompany provided in thismanual for anyinformation, does notmean
these information can provide to third parties.
Notice:
AS technical developing maybe some part of the
datasheet get different with actual product. Pretty
sorry for this, if want more news about products.
Please check our website or connect with our sales
directly

iii
SAFETY PROVISION FOR THE USING NOTICE
This product is designed as a good and reliable quality,
however it still need to avoid human hurt or destroy.
Please read carefully and keep this manual for
search.
Do not place the equipment near water or
moisture.
Do not put anything on the power line, it should
be in the not touch place.
To avoid fire, do not put power lines together or
firmly connected to each other.
Please always check power control whether fix
up with other equipments.
Please keep optical fiber ports and slots clean.
When it work, not lock fiber cross section.
Please keep equipment clean, please use a soft
cotton wipe it.
Please follw use manual, please do not repair by
youself.
When appear following cases, please shutdown power and
directly connect with our company.
Water split
Equipment break or crust broken.
Equipment working abnormity or need update.
Equipment gets some smell or smoke or noise.

Catalogue
Chapt 1 Introduction 5
1.1MIEN2205 industrial Ethernet Switch 5
1.2 MIEN2205 system features 5
1.3 Product packing list 6
Chapt 2 General 7
2.1 System parameters 7
Chapt 3 Hardware 8
3.1 Din-Rail Casing 8
3.2 MIEN2205 front panel 8
3.3 MIEN2205-S front panel 9
3.4 LED indicator lights 10
3.5 Power supply 10
Chapt 4 Hardware installation 11
4.1 DIN-Rail installation 11
4.2 Cable connection 12
4.3 Fiber connection 12
Chapt5 Testing Guide 14
5.1 Self-Verification 14
5.2 Electronic port testing 14
5.3 Fiber optic port testing 15
Chapt6 Network construction 16
6.1 Network construnction introduction 16
6.2 Network collocate 16
6.3 Order information 17

5
Chapter 1 Introduction
1.1 MIEN2205 industrial Ethernet Switch
The MIEN2205 is 5x10M/100M industrial Ethernet switch. It is
high performance Industrial Ethernet switch.
The MIEN2205-S is 5x10M/100M and 1x100Base-FX
industrial Ethernet Switch. It is high performance Industrial
Ethernet switch.
The MIEN2205 provide din rail installation.
Each RJ45 port has adaptive function, can automatically
configure the 10Base-T or 100Base-TX full-duplex or half
duplex status, and can automatically MDI/MDI-X connection.
1.2 MIEN2205 system features
High performance industrial Ethernet switch interfaces
10Base-T/100Base-TX adaptive portfull/half duplex
automatic MDI/MDI-X connection.
MIEN2205 with full duplex 100Base-FX single mode or
Multimode fiber interface.
Broadcast Storm suppression
Industrial power supply
Provide industrial grade DC24V power supply and
redundant power input.(DC12V,DC48V,AC/DC220V and
others can choose)
Reliable EMC protection and over-current / over-voltage
protection.
Rugged Design
Single-ribbed aluminum chassis cooling surface design,
efficient cooling without fan, the system can work reliably
at -40  ~ +70  environment.
Closed high-strength aluminum casing, enabling the
system to work reliably in harsh and hazardous industrial
environments.

6
DIN-Rail mounted installation
1.3 Product packing list
MIEN2205 includes following items:
Item QTY
MIEN2205 Industrial Ethernet switch 1pcs
User manual 1pcs

7
Chapter 2 General
2.1 System Parameters
Content MIEN2205/MIEN2205
RJ45 ports MIEN2205: 5x10Base-T/100Base-TX
MIEN2205-S: 4x10Base-T/100Base-TX
Optic port MIEN2205-S: 1x100Base-FX
System
parameter
Standard: IEEE802.3, IEEE802.3u, IEEE 802.3x
store-and-forward mode rate148810pps
MAC address table size1K
Converter methodstore-and-forward mode
Electric port
parameter
Physics socketRJ45 Socket(shielded)
RJ-45 socket10Base-T/100Base-TX,auto-negotiation
Socket standardIEEE802.3 standard
Communication distance<100m
Optic port
parameter
Link Budget: >-12dBm(Single mode); >-17dBm(Multimode)
RX Sensitivity: <-38dBm(Single mode); <-35dBm(Multimode)
Wavelength: 1310nm/1550nm(Single mode); 1310 nm(Multimode)
Typical Distance: 2080Km(Single mode); <5Km(Multi mode fiber)
Converter type: SC/FC/ST
Transport rate: 125Mbps
Power
parameter
Voltage input: DC24V
Input expend: <10W
Voltage passing: Inside
Technical
parameter
Dimensions(HWD): 135 53 90mm(not include DIN rail
equipments dimensions)
Installation method: DIN rail
Heat dissipation: protection class with aluminum casing, not flow fan.
Weight: 0.6
Working
environment
Operation: -20+70
Store: -45+85
Ambient Relative Humidity: 095%(non-condensing)

8
Chapter 3 Hardware
3.1 DIN-rail casing
MIEN2205 use Din rail mount installation. Machine with six sides
fully enclosed structure.
Dimensions WHD114 80 33mmnot including DIN rail
dimension
3.2 MIEN2205 front panel
MIEN2205 industrial Ethernet switch offers
5x10Base-T/100Base-TX RJ45 Ethernet ports.

9
3.3 MIEN2205-S front panel
MIEN2205-S industrial Ethernet switch offers 1 100Base-FX
and 4x10Base-T/100Base-TX RJ45 Ethernet ports
TX for the optical transmitter, RX for the optical receiver.
3.4 LED indicator lights
The front panel of MIEN2205 industrial Ethernet switch LED
indicatorto show the state of the system and port operation,
easy to find and solve problems. Schematics.3-1 shows
interface LED indicator lights functions:
Schematics 3-1 LED indicator lights
LED Lights Status
Interface LED Status
On Power is being supplied to the power input.
POW Off Power is not being supplied to the power
input.

10
Optic socket LED
On FX port’s 100 Mbps link is active
Blinking Data is being transmitted at 100Mbps.
LINK Off 100BaseFX port’s link is inactive.
RJ45 socket LED state
Each RJ45 port has two LED indicator lightsthe yellow LED light for
the Link Budget indicator lightsthe green LED light for the port
connection status indicator lights.
On 100M working state (100Base-TX10M/
100M
YellowOff 10M TP10Base-T
On Link is active
Blinking Data is being transmitted at 10 Mbps
LNK/ACT
GreenOff Link is inactive.
3.5 Power spply
MIEN2205 is DC24V and 5.08mm 3 wire terminal block line
power input. The Power cable diameter is <1.5mm. If you use
AC220V power supply, V+ connected Fire Wire L, V- connected
zero line N, and pay attention to safety, to prevent electric shock.

11
Chapter 4 Hardware installation
4.1 DIN-Rail installation
Most of industrial applications using 35mm standard DIN-Rail
installation. The plastic DIN-Rail plate should be fixed to the
rear panel of the MIEN2205 industrial Ethernet switch when
you take it out of the box. If you need to reattach the DIN-Rail
plate to MIEN2205, please check the DIN-Rail is situated
towards the top. Please notice following two contents as below
shows:
Checking DIN-Rail is fixed firm, DIN-rail is installed on
other equipment, whether there is enough space for the
installation MIEN2205.
Checking DIN-Rail whether suitable for MIEN2205 power
input.
Please selected MIEN2205 the correct position. As below
behind picture shows:
Insert DIN-Rail into DIN-Rail slot and as schematics 4-1 A
shows turning equipment.
As schematics 4-1 B shows, insert DIN-rail into DIN-Rail
slot and confirm the MIEN2205 reliable equipment
installed on the DIN-rail.

12
Schematics 4-1 DIN-Rail installation
4.2 Cable connection
After install MIEN2205, please correct install cable. Cable
installation please following behind notice:
Equipment port connection
MIEN2205 provided 10Base-T/100 RJ45 interface, use the
crossover cable direct connect with master PC and equipment.
Industrial Power supply
MIEN2205 using the instructions on the product label DC24V
power supply. After all other cables connected, you can
connect the power supply.
4.3 Fiber connection
MIEN2205/MIEN2205 provide full-duplex 100Base-FX
single-mode or multimode fiber interface. Optical interface type
can be selected according to requirements of SC / ST / FC.

13
Attention
This switch uses lasers to transmit signals
over fiber cable. Laser Class 1 laser/LED
products can cause serious damage on the
eyes harmless. When the equipment is
power on, please do not stare directly into
the laser beam.
Connection optic cable please use following steps:
When use fiber cable port, remove SC/FC/ST port cover;
When it finish work, please put the plastic cover to protect
the fiber optic head, keep clean.
Check the fiber optic cable head whether it clean or not. If
it not clean, this will redunce the quality of communication,
internet speed maybe lower. Please clean it with tissue
paper or tampon.
One fiber optic head connect with switch optic interface,
the other fiber head connect with another equipment fiber
optic interface equipment.
After connection, please check switch the front interface’s
LNK/ACT LED lights. If lights on, connection is available.

Chapter 5 Testing guide
5.1 Self-Verification
When it running, all indicator lights are bright one time, these
means working well.
5.2 Electric port testing
As schematics 5-1 shows, connect two PC with MIEN2205
RJ45 ports and sent Ping command each other, the two sides
get right Ping message and don’t loss package. At the same
time the yellow light on the corresponding port should be
bliking (100M Speed) or light off (10M speed), corresponding to
green light should be shining on the port.That means it working
well.
Schematics 5-1 Electric pin testing

15
5.3 Fiber optic port testing
As schematics 5-2 shows, connect two PC with MIEN2205
RJ45 ports and sent Ping command each other. If any one can
get right Ping message and don’t loss package. slot‘s yellow
light blinking (Speed 100M) or light off (Speed 10M).If green
LED light is blinking, that means it working well.
Schematics 5-2 Fiber pin testing

Chapter 6 Network construction
6.1 Network construction
MIEN2205 Industrial Ethernet switch provide
5*10Base-T/100Base-TX RJ45 ports. Each ports can directly
connect witch master, or connect another industrial
ethernet/hub with terminal which used as shared internet link.
MIEN2205 network construction Schematic
6.2 Network collocate
MIEN2205 standard power supply is DC24V. Users can
choose according to the actual situation of isolation DC24V or
DC-48V power supply, or AC/DC220V, and wide-voltage power
supply. DC12V, 9 ~ 18V input voltage range;DC24V, input
voltage range 18 ~ 36V; DC48V, input voltage range 36 ~ 72V
AC-DC universal power supply, DC110/220V, input voltage
range 100 ~ 360VDC; AC110/220V, input voltage range of 90 ~
260VAC, 50/60Hz.
MIEN2205 single-mode optical interface can be customized /
multi-mode and the SC / ST / FC interface. Standard
single-mode optical interface is SC.
6.3 Order information

17
Model Description
MIEN2205
-P
5 ports 10M/100Mbase-TX high performance industrial ethernet fiber
optic converter,which is used to ethernet signal communication. Multi
mode, 2Km,DC12~36V support double power supply,SC,DC
Spark-over voltage 100V/S: 600V±20%V; Nominal Impulse Discharge
Current 8/20µs 10times:10KA;Impulse Life 10/1000µs100A:500 times
MIEN2205
-S
5 ports 10M/100Mbase-TX optic port high performance industrial
ethernet fiber optic converter,which is used to ethernet signal
communication. Single mode, 20Km,DC12~36V support double
power supply,SC,DC Spark-over voltage 100V/S: 600V±20%V;
Nominal Impulse Discharge Current 8/20µs 10times:10KA;Impulse Life
10/1000µs100A:500 tim
MIEN2205
-P1
4 ports 10M/100M + 1 multi mode 100Base-FX optic port high
performance industrial ethernet fiber optic converter,which is used to
ethernet signal communication. Multi mode, 2Km,DC12~36V support
double power supply,SC,DC Spark-over voltage 100V/S: 600V±20%V;
Nominal Impulse Discharge Current 8/20µs 10times:10KA;Impulse Life
10/1000µs100A:500 time
MIEN2205
-S1
4 ports 10M/100M + 1 single mode 100Base-FX optic port high
performance industrial ethernet fiber optic converter,which is used to
ethernet signal communication. Single mode, 20
Km,DC12~36V
support double power supply,SC,DC Spark-over voltage 100V/S:
600V±20%V; Nominal Impulse Discharge Current 8/20µs
10times:10KA;Impulse Life 10/1000µs100A:500 times
Schematics 6-1 MIEN2205 order information