Haier LY22K3CWW2 User manual

1MFBTFSFBEUIJTNBOVBMDBSFGVMMZCFGPSFPQFSBUJOHUIFVOJUBOELFFQJU
GPSGVUVSFSFGFSFODF
-FTFO 4JF EJFTF #FEJFOVOHTBOMFJUVOH WPS EFS FSTUFO 7FSXFOEVOH
EJFTFT (FSÊUFT CJUUF TPSHGÊMUJH EVSDI VOE CFXBISFO 4JF TJF GàS
[VLàOGUJHFT/BDITDIMBHFOBVG
-FHHFSF BUUFOUBNFOUF RVFTUP NBOVBMF QSJNB EJ NFUUFSF JO GVO[JPOF
MhBQQBSFDDIJPFDPOTFSWBSMPQFSGBSWJSJGFSJNFOUPJOGVUVSP
/FFNEFHFCSVJLTBBOXJK[JOH[PSHWVMEJHEPPSWPPSEBUVIFUUFMFWJTJFUPFTUFM
JOHFCSVJLOFFNUFOCFXBBSEF[FWPPSUPFLPNTUJHFSFGFSFOUJF
$)')4!,,#$4%,%6)3)/.
4%,%6)3)/..5-%2)15%%#2!.,#$
$)')4!,,#$46
4%,%6)3/2%,#$$)')4!,%
$)')4!,%,#$4%,%6)3)%
*/4536$5*0/."/6"-
."/6&-%h65*-*4"5*0/
#&%*&/6/(4"/-&*56/(
."/6"-&%**4536;*0/*
(&#36*,4""/8*+;*/(
-JSFBUUFOUJWFNFOUDFNBOVFMBWBOUEhVUJMJTFSMBUÏMÏWJTJPO-FDPOTFSWFS
FOWVFEhVOFVUJMJTBUJPOVMUÏSJFVSF
1MFBTFSFBEUIJTNBOVBMDBSFGVMMZCFGPSFPQFSBUJOHUIFVOJUBOELFFQJU
GPSGVUVSFSFGFSFODF
-FTFO 4JF EJFTF #FEJFOVOHTBOMFJUVOH WPS EFS FSTUFO 7FSXFOEVOH
EJFTFT (FSÊUFT CJUUF TPSHGÊMUJH EVSDI VOE CFXBISFO 4JF TJF GàS
[VLàOGUJHFT/BDITDIMBHFOBVG
-FHHFSF BUUFOUBNFOUF RVFTUP NBOVBMF QSJNB EJ NFUUFSF JO GVO[JPOF
MhBQQBSFDDIJPFDPOTFSWBSMPQFSGBSWJSJGFSJNFOUPJOGVUVSP
/FFNEFHFCSVJLTBBOXJK[JOH[PSHWVMEJHEPPSWPPSEBUVIFUUFMFWJTJFUPFTUFM
JOHFCSVJLOFFNUFOCFXBBSEF[FWPPSUPFLPNTUJHFSFGFSFOUJF
$)')4!,,#$4%,%6)3)/.
4%,%6)3)/..5-%2)15%%#2!.,#$
$)')4!,,#$46
4%,%6)3/2%,#$$)')4!,%
$)')4!,%,#$4%,%6)3)%
*/4536$5*0/."/6"-
."/6&-%h65*-*4"5*0/
#&%*&/6/(4"/-&*56/(
."/6"-&%**4536;*0/*
(&#36*,4""/8*+;*/(
-JSFBUUFOUJWFNFOUDFNBOVFMBWBOUEhVUJMJTFSMBUÏMÏWJTJPO-FDPOTFSWFS
FOWVFEhVOFVUJMJTBUJPOVMUÏSJFVSF

Contents
EN-1 Digital LCD Television Instruction Manual
Contents
Safety Warnings 2
WELCOME ............................................................. 2
IMPORTANT INFORMATION ................................ 2
About your LCD TV 5
GET TO KNOW YOUR TV....................................... 5
Front control panel............................................................... 5
Rear Terminals Control ........................................................ 5
GET TO KNOW YOUR TV WITH DVD .................... 6
Front control panel............................................................... 6
Rear Terminals Control ........................................................ 6
GET TO KNOW YOUR REMOTE CONTROL ........... 7
CONNECTING YOUR TV........................................ 8
ANTENNA CONNECTION .................................................... 8
IMPROVE YOUR SIGNAL ...................................................... 8
CONNECT YOUR PC TO THE TV ......................................... 8
CONNECT A DVD PLAYER TO YOUR TV .......................... 8
CONNECT A DVD PLAYER OR VCR TO YOUR TV .......... 8
Connection Option 1 ........................................................... 8
Connection Option 2 ........................................................... 8
SCART INPUT........................................................................... 8
HDMI INPUT............................................................................. 9
MOUNT YOUR TV ONTO THE WALL .................................9
PREPARATION OF YOUR REMOTE CONTROL...... 9
BATTERY INSTALLATION...................................................... 9
BATTERY CAUTION................................................................ 9
Getting Started 9
Setting up............................................................. 9
LOCATION................................................................................. 9
CONNECTION.......................................................................... 9
SWITCHING YOUR TV ON ..................................................10
TUNING YOUR TV ............................................... 10
SWITCHING TO AN EXTERNAL SOURCE OTHER
THAT TV...................................................................................10
AUTO SEARCH.......................................................................10
DIGITAL MANUAL SEARCH...............................................10
Analog Manual Search ......................................................11
Channel Edit..........................................................................11
RENAME..................................................................................12
MOVE .......................................................................................12
Setting favourite channel.................................................12
SKIP...........................................................................................12
GUIDE (Electronic Program Guide) ...............................12
COMMON INTERFACE ........................................ 13
Software Update function ...............................................13
Operation...............................................................................14
USING YOUR TV.................................................. 14
How to select the TV program........................................14
HOW to adjust volume......................................................14
CH.LIST function ..................................................................15
ADJUSTING PICTURE SETTINGS ....................... 15
Changing the Picture Setting .........................................15
ADJUSTING SOUND SETTINGS ......................... 15
Changing the Sound Setting ..........................................15
FUNCTION SETTINGS......................................... 16
TIME SETTINGS .................................................. 17
LOCK MENU SETTING ........................................ 19
SHORTCUT MENU DISPLAY ............................... 20
Using the features 22
Teletext functions.............................................. 22
Teletext....................................................................................22
USB MODE .......................................................... 23
TO USE THE USB DEVICE ...................................................23
When connecting/removing the USB device ...........23
Operating the USB device................................................24
Playing a Picture..................................................................24
Playing Music........................................................................24
Playing a Movie....................................................................25
Text ...........................................................................................25
Using External USB Disk For Recording........... 25
TIME SHIFT .............................................................................26
RECORDING ...........................................................................26
USING YOUR DVD PLAYER
(certain models only) ........................................ 27
ADDITIONAL DVD FUNCTIONS......................... 28
Reference Sections 29
TROUBLESHOOTING.......................................... 29
Specification ...................................................... 29

Safety Warnings
Digital LCD Television Instruction Manual EN-2
Safety Warnings
WELCOME
Thanks for buying this 19"/22"/40" HD Ready Digital LCD/LED LCD TV. This guide will help you set up and begin using
your TV.
First, check the contents of your box with the parts checklist below:
19"/22" /40" HD Ready Digital LCD/LED LCD TVt
Remote controlt
AAA batteryt ×2
Instruction Manualt
Warrantyt
TV Standt
5XScrews for TV stand(only for 40" model)t
Component adapter,Component audio adapter ,SCART adapter (only for 40" model)t
Cover button (only for 40" model)t
Now you can get started!
IMPORTANT INFORMATION
READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.
FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN
THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF
CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.
THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE
CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR
SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE
THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.
NOTE: SERVICING THE UNIT YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT
DAMAGE. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.
TruSurround XT, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is
incorporated under license from SRS Labs, Inc.
TruSurround XT® creates a truly immersive surround sound experience with rich bass and clear dialog from only
two speakers.

Safety Warningss
EN-3 Digital LCD Television Instruction Manual
The product should be tightly fixed to avoid
drop damages and even fire.
To avoid fire hazards, do not use this
product under direct sunlight or closely
to heat sources.
Do not locate the product close to water
or oil, which may cause fire hazards.
Unplug the power supply and antenna of
the product when there is a rainstorm,
especially
Thunderstorm.
Do not use damaged or worn electric plugs
and keep electric cord away from heat sources
to avoid electric shocks or fire hazards.
Do not connect excessive sockets in parallel
or share the same socket by multiple plugs
to avoid fire hazards.
The product must be placed on a solid and
stable surface to avoid collapse.
Unauthorized disassembly of the television
is prohibited to avoid electric shocks or fire
hazards. Contact
authorized after-sales
service if technical
service is needed.
Keep the product away from a transformer
or heat source to avoid fire hazards.
Disconnect the product from power supply
and contact authorized after-sales service
if abnormal sound is heard in the product.

Safety Warnings
Digital LCD Television Instruction Manual EN-4
Don‘t use or store inflammable materials
near the product to avoid explosion or fire
hazards.
Don’t place the product in a humid area to
avoid fire hazards.
The antenna of the product should be away
from electric cable to avoid
electric shocks.
Never touch the plug when your hand is wet
as this might cause electric shocks.
Always make sure that the televisionis well
plugged as poor electric
connection might cause fire.
When antenna is used, measures should be
taken to prevent water
from flowing down
along the cable into
the television.
Unplug the television, use soft fabric, never
chemicals, if you are going to make
cleaning of the product.
Make sure that no
water drops in the
product.
The plug and electric cable must be kept
clean to avoid electric
shocks or fire
hazards.
Disconnect the television from power supply
and antenna when there is a
rainstorm or thunderstorm
to avoid electric shocks
or fire hazards.
Disconnect the television from power supply
to avoid electric shocks or fire
hazards in a long
vocation.

About your LCD TV
EN-5 Digital LCD Television Instruction Manual
1. Put the small piece out of the base stand.
2. Position the column with the base stand.
4. Put the small piece in the base, also can use a screw.
3. Push the LCD TV onto the base.ˈRotate the machine about 15 degrees according
to the arrow on the base stand .
Installing the stand
Only for LED19/22T3

About your LCD TV
Digital LCD Television Instruction Manual EN-6
Installing the Stand
Only for LED40T3
1.Carefully place the TV screen side down on a table. We suggest that you place the
wrapping material fromthe TV package on the table top to protect the screen from
damage.
2.Position the stand with the bottom of the TV as shown below.
4.Attach the screw from the bottom of the stand to the TV.
3.Push the stand onto the TVDŽ
.

About your LCD TV
EN-7 Digital LCD Television Instruction Manual
About your LCD/LED LCD TV
GET TO KNOW YOUR TV
Only 19"/22" LCD Model
Front control panel
1Standby switch
2SOURCE !

3MENU

4VOL-  

VOL+ 

5CH- " 

CH+ "
6Power indicator
7Remote Sensor

About your LCD TV
Digital LCD Television Instruction Manual EN-8
Rear Terminals Control

About your LCD TV
EN-9 Digital LCD Television Instruction Manual
67
1
2
4
3
5
DC IN USB DIGITALVOUT
(COAXIAL) HDMI IN
COMPONENT
IN
AV IN
Y Pb Pr
VIDEO L-AUDIO-R
L-AUDIO-R
PC/DVI AUDIO IN
PC IN
SCART
12 3 45
6
7
8
9
10
11
1DC IN input
2EARPHONE
output
3USB
input
4Digital output input
5HDMI IN
input
6PC IN input
7PC/DCI AUDIO IN
input
8TV SCART input
9AUDIO IN
input
>AV IN input
ACOMPONENT IN
input
1SOURCE Call the input Source menu/Conrm button
when operating menu.
2MENU
Press to select the main menu.
3VOL-
Volume down/Left orientation to adjust the item
in the OSD.
VOL+
Volume up/Right orientation to adjust the item
in the OSD.
4CH-
TV channel down/to select the item in the menu.
CH+ TV channel up/to select the item in the menu.
5POWER
6Power indicator
7Remote Sensor
Only 19"/22" LED LCD Model

About your LCD TV
Digital LCD Television Instruction Manual EN-10






LOV
HC
UNEM
ECRUOS

HDMI 1 IN
USB
DIGITAL AUDIO OUT (OPTICAL )
ANT IN






2 INIMDH
NITNENOPMOC
CP
Y P b
P
r
L
OIDUA
R
NICP 3 INIMDHTRACS


    
PC/DVI AUDIO
1SCART input
2Component input
3Component Audio
input
4PC input
5PC/DVI AUDIO
input
6HDMI3 IN input
7HDMI2 IN
input
8Common Interface
9Earphone
0ANTENNA input
AOptical output
BUSB
CHDMI1 IN input
1SOURCE Toggles between all the available input
sources
2MENU Press to see an on-screen menu of yourTV’s
features.
3VOL+/- Press to increase or decrease the volume .
4CH+/-
Press to change channels.
5POWER Press to turn theTV on and o.
Only 40" LED LCD Model

About your LCD TV
EN-11 Digital LCD Television Instruction Manual
GET TO KNOW YOUR REMOTE CONTROL
When using the remote control, aim it towards the remote sensor on the TV.
1Stand By
2DVD Menu / REC
3
DVD open / close
4Picture Mode
5Sound Mode
6Call Screen Display
7Sleep button
8DTV Audio / NICAM / DVD Audio
9Aspect Ratio Control button
0Channel list button
ASubtitle button
BProgram Number Channel selection
C
Source Exchange
DQ.VIEW / Swap Channel
EV+/V-: Volume selection
FP+/P-: Channel selection
GMute
HMenu button
IGUIDE button (only for DTV)
JFavourite list button
KOK button
LCursor Mover button
MBack button (only for USB)
NExit Screen Display
OREPEAT (only for DVD, USB, REC & Timeshift)/CANCEL button
PZoom (only for DVD & USB)/Teletext index (only for TV) / REC index
QPlay / Pause button (only for DVD & USB) /Timeshift
RStop (only for DVD, USB, REC &Timeshift)
S
Fast Reverse (only for DVD, USB, REC &Timeshift)
T
Fast Forward (only for DVD, USB, REC &Timeshift)
UPrevious (only for DVD, USB, REC & Timeshift)
VNext (only for DVD, USB, REC & Timeshift)
WDVD Set up / Text
XDVD Title / Teletext Mix
Y
DVD Search /Teletext Subcode
ZDVD 10+ /Teletext Hold
[DVD Program / Teletext Reveal
\DVD A-B Repeat /Teletext Size
]DVD Call /Teletext Mode
`DVD Angle/Teletext Time
Note
RED button, GREEN button,OBLUE
button and YELLOW button are fast
text button in analog signal. Function
button in DVBT (just reference the
OSD)

About your LCD TV
Digital LCD Television Instruction Manual EN-12
CONNECTING YOUR
TV
ANTENNA CONNECTION
Connect your aerial to the back of the TV into the
ANTENNA IN socket.
IMPROVE YOUR SIGNAL
To improve picture quality in a poor signal area, use a
signal amplifier (not supplied).
CONNECT YOUR PC TO THE TV
You can use your TV as a monitor for your personal
computer by connecting it with a VGA cable (not
supplied).
Read your computer user guide and check it has a
A
VGA connector.
Turn the power o on your TV and PC.
B
Connect a D type 15-pin VGA interface cable to theC
VGA video interface connector on the PC. Connect
the other end of the cable to the PC interface
connector on the TV. Tighten the screws on the
VGA connectors and connect the audio cable (not
supplied) to the audio input socket on the back of
the TV.
Turn on the power of the TV firstly and then the PC.
D
Press the button on the TV or TV remote control toE
set the video input mode to VGA.
Once the image shows, if there is noise present,
F
change the VGA mode to another resolution,
change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear.
CONNECT A DVD PLAYER TO YOUR
TV
Connect the DVD video outputs (Y, Pb, Pr) to the
COMPONENT (Y, Pb, Pr) IN socket on your TV.
Turn on the DVD player and insert a DVD.A
Press the button to select .B
Refer to the DVD player user guide for operatingC
instructions.
DVD
CONNECT A DVD PLAYER OR VCR TO
YOUR TV
There are two ways in which you can connect a DVD
player or VCR to your TV. Make sure that both the TV and
DVD player or VCR are switched o before you connect
them.
Connection Option 1
Connect the audio and S-VIDEO cables from the VCRA
output jacks to the TV input jacks.
Insert a video tape into the VCR and press
BPLAY on
the VCR.
Turn on the power of the TV first, then the VCR.
C
Press theDSOURCE button on the TV to set the video
input mode to S-VIDEO.
Connection Option 2
Connect the AV DVD/VCR outputs to the AV INA
socket on your TV.
Press the
BSOURCE button on the TV to set the video
input mode to AV.
SCART INPUT
Connect the scart lead from the external deviceA
(DVD player, Set-top box or games console) to the
TV scart socket.

About your LCD TV
EN-13 Digital LCD Television Instruction Manual
Press theBSOURCE button to select SCART mode.
Press the
CPLAY button on the external device.
HDMI INPUT
Connect the cable from the HDMI device to the TVA
HDMI socket.
Press the
BSOURCE button to select HDMI mode.
Refer to the HDMI device user guide for how to
C
operate.
MOUNT YOUR TV ONTO THE WALL
You can mount your TV onto the wall by using a wall
bracket (not supplied). Use M4/M6 machine screws (4
pcs) to screw the TV onto the bracket (not supplied).
PREPARATION OF
YOUR REMOTE
CONTROL
BATTERY INSTALLATION
Place the remote control face down, then open theA
cover of the battery compartment.
Install two AAA batteries. (The + and - symbol of theB
battery must match with the marks on the remote).
Close the cover of the battery compartment.C
BATTERY CAUTION
Confirm there is no object between the remote control
and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the
signal sent by the remote control. In this situation turn
the TV set to avoid the direct light source.
Do not put the remote control in direct heat or in a damp
place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries at the correct polarities. Do not
use rechargeable batteries. If your TV is to be stored for
a period of time, remove the batteries from the remote
control.
03 Getting
Started
Setting up
LOCATION
You will need to place your TV near your plug socket (so
the power cable can comfortably reach) and within reach
of your aerial socket or extension lead.
CONNECTION
Insert your TV aerial lead into the Antenna input atA
the side of the TV.
About your LCD TV / Getting Started

Getting Started
Digital LCD Television Instruction Manual EN-14
Insert the batteries into the remote control. MakeB
sure they are inserted the right way around,
matching the polarity as indicated inside the battery
compartment.
SWITCHING YOUR TV ON
Press theASTANDBY button on the right side/top of
the TV once. A red ashing light will appear in the
corner of the screen.
Press
BSTANDBY on the remote control. The TV will
turn on and the red light will turn blue. This may take
a few moments.
Select your chosen language when prompted from
C
the list that will appear on screen. Use the button
to scroll to the language you want and press to
confirm.
TUNING YOUR TV
SWITCHING TO AN EXTERNAL
SOURCE OTHER THAN TV
If you have attached a DVD player or similar external
device to the TV, you will need to tell the TV to display
the content from it. Simply press SOURCE which will
bring up the source menu in the left corner of the screen,
use the and button to highlight the required
source and press OK select.
For details of how to plug in other equipment see GET
TO KNOW YOUR TV on page 5.
AUTO SEARCH
PressAMENU button.
PressB button to select Tuning menu, press 
button to enter.
Press
C button to select Country item.
Press  button to select you needed.
Press
D button to select Auto Search item, press
OK button to enter.
Press  button to select the OK option, and press
OK button to start searching.
Press the MENU button, you can choose to skip the
TV /DTV Search or not.
PressEEXIT button to stop auto search during
searching.
Note
It may take a few moments to complete the AutoO
Search.
DIGITAL MANUAL SEARCH
PressAMENU button.

Getting Started
EN-15 Digital LCD Television Instruction Manual
PressB button to select Tuning menu, press 
button to enter.
Press
C button to select Digital Manual Search
item, press button to enter.
PressD button to select the Channel.
Press OK button to start searching.
Once a channel is located, you can press
EOK button
to save it.
Press EXIT button to exit.
Analog Manual Search
Follow the below steps when you need to have a manual
search.
Press
AMENU button.
PressB button to select Tuning menu, press
button to enter.
Press
Cbutton to select Analog Manual Search
item, press button to enter.
PressD button to select Search item, press
button is used to select the higher frequency
channel.
Press button is used to select the lower frequency
channel.
And then select Storage To, press
E button to
select the position number you want the channel
on. Once a channel is located, you can press red
button to save it. Press EXIT button to exit.
Sound SystemV
Press button to select “Sound System”, then
press  button to select the correct sound system.
Current CHV
Press  button to select the channel number to
edit.
Storage ToV
Press  button to select the program number you
want to storage to.
Fine tuneV
If the picture and/or sound are poor, try using the
FINE TUNE feature. Do not use this feature unless
reception is poor.
Repeat above steps
AA-C, then press button to
select the Fine Tune item.
Press
B button repeatedly to carry out fine
tune, till the best picture and sound are obtained,
then loosen the button.
Channel Edit
Using this function, you can rename, move, set favorite
channel and skip the channel in the analogue mode.
Press
AMENU button.

Getting Started
Digital LCD Television Instruction Manual EN-16
PressB button to select TUNING menu, press 
button to enter.
Press
C button to select CHANNEL EDIT item.
Press button to enter the sub-menu. You can
press red, green, yellow or blue button to enter the
menu you need.
RENAME
PressA button to select the channel, and press
green button to rename.
PressB button to select the number position of
channel name. Press  button to select number.
You can press the
CEXIT button to cancel the changes
at anytime.
Note
The RENAME function is only available in ATVO
program.
MOVE
PressA button to select the channel and press
yellow button to select the position.
PressB button to select the number position you
want to remove to, press yellow button to confirm.
You can press the
CEXIT button to cancel the changes
at anytime.
Setting favourite channel
PressA button to select the channel, press red
button to set your favourite channel.
You can press the red button to cancel the changes
B
at anytime.
Press
CFAV button on the remote control and
Favourite List will be displayed.
Press
D button to select the channel, and press
OK button to enter.
SKIP
PressA button to select the channel and press
blue button to skip the current channel.
You can press the
Bblue button to cancel the changes
at anytime.
GUIDE (Electronic Program Guide)
Using this function, you can access the DTV program
information.
Press
AMENU button.
PressB button to select TUNING menu.
Press button to enter.

Getting Started
EN-17 Digital LCD Television Instruction Manual
Press
C button to select the guide item.
Press OK button to enter the submenu, the
electronic program guide is displayed.
You can quickly call up Guide menu by GUIDE
button on the remote control.
Note
Only DTV mode.O
COMMON INTERFACE
The common interface (CI) slot is designed to accept the
Conditional Access (CA) Module and Smart card in order
to view the pay TV programmes and additional services.
Contact your Common Interface service provider to get
more information about the modules and subscription.
Please noted that CA modules and smart cards are
neither supplied nor optional accessories from us.
Warning
Switch o your TV before any module is inserted int
the Common Interface slot.
Insert the CAM correctly, then Smart Card to the CIA
slot that is located at the side of the TV.
CI Slot
CAM
Smart Card
Turn on the TV and it will display the below messageB
if the CA module is detected. Wait for few moments
until the card is activated.
Press the
CMENU button to display the Main Menu
and use the and button to highlight the
“Common Interface”line and press the “OK” button.
Detailed information on the CI card in use is
D
displayed.
Press
EOK button to access the card menu. Refer to
the module instruction manual for setting details.
When module is removed, the following message
F
will appear on the screen.
Software Update function
When you get the updating news from the TV shop’st
web, you can update the operating software using
the Download menu. The data for various units are
transferred consecutively on a special receiving
channel.
You need to search the channel with updating codet
stream.

Getting Started
Digital LCD Television Instruction Manual EN-18
Note
You can get information from the TV shop orO
internet.
Operation
PressAMENU button.
PressB button to select TUNING menu, press 
button to enter.
Press
C button to select Software Upgrade item.
Press
D button to set it as On. (The default is O)
The Start Upgrade item can be selected
E
.(The default is grey and can not be selected)
13%
Press EXIT to cancel download
PressF button to select the System Update
option and use OK button to enter. Then the TV will
restart and search the upgrade information.
Note
If the upgrade information is received, the TV willO
begin to upgrade. Or else, the TV will be back the
DTV source.
Load the receiver identification. This process may
G
also take several minutes. You can press EXIT button
to cancel the download and your TV set will be back
the DTV source.
100%
15%
Press EXIT to cancel download
Updating in progress - Do not turn off the TV
After the download has finished, your TV set willH
enter burning state and the indicator light is shining.
The menu 4 of right appears.
The set will be back the DTV source when the update is
completed.
USING YOUR TV
How to select the TV program
Using Program number button Enter the channelA
number with the number keypad on the remote
control.
Using
BP+/P- button.
Press the P+/P- button to select a channel number.
HOW to adjust volume
Press V+/V- button on the remote control or the side of
the TV to adjust the volume level.

Getting Started
EN-19 Digital LCD Television Instruction Manual
CH.LIST function
Press CH.LIST button on the remote control will display
Channel List menu, and then press button to enter.
Press button to select the channel, and then press
OK button to enter.
ADJUSTING PICTURE
SETTINGS
Changing the Picture Setting
PressAMENU button.
PressB button to select Picture menu, press 
button to enter.
Press
C button to select the item requires
adjusting.
Press
D button to adjust the selection item.
When you are satisfied with your choice, press the
E
EXIT button to return to normal viewing or press
MENU button to return to the previous menu.
ContrastV
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
BrightnessV
This will adjust the light output of the complete
picture, which will mainly aect the darker areas of
the picture.
ColourV
This will adjust the saturation level of the colours to
suit your personal preference.
SharpnessV
This will adjust the sharpness of fine details in the
picture.
TintV
Allows you to select the colour mix (Tint) of the
picture.
Note
The Tint function is only available in NTSC mode.O
ModeV
This will select the picture mode. Select Standard/
Mild/User/Vivid according to the program. You can
quickly select the desired mode by P.MODE button on
the remote control.
Colour temperatureV
This will increase or decrease Warm (red) and Cool
(blue) colours to suit personal preferences.
Select Cool to give the white colour a blue tint,
Normal to give the white colour a neutral tint, Warm
to give the white colour a red tint.
Noise ReductionV
Automatically filters out and reduces the image noise
and improves picture quality when receiving weak
video signals.
Select O/Low/Standard/High according to the
image noise.
ResetV
To recover to the default value.
ADJUSTING SOUND
SETTINGS
Changing the Sound Setting
PressAMENU button.