Haier HK1207TVE User manual

Upute za uporabu
Korisničko uputstvo
Servisna mjesta
Jamstveni list
HR
Servisna mjesta
Garantni list
BiH
Servisna mjesta
Garantni list
CG
Servisna mesta
Garantni list
SR
User Manual
UPUTE ZA UPORABU
PERILICA RUBLJA
HK-1207TVE
HK-1207TVE ME

HK-1207TVE
HK-1207TVE ME
User
manual
Automatic
drum
washing
machine
ENG

HK-1207TVE ME
Table of Contents
Before using the appliance
Matters needing attention......1-3
Installation.............................4-5
Function ...............................6-7
How to operate the washing machine
Program description table........8
Preparation .............................9
Washing Procedure ..........10-11
Maintenance ..........................12
Technical Specifications ........14
Wiring Circuit .........................15
Maintenance
Troubleshooting Guide ..........13
Name of parts...inside front cover

HK-1207TVE ME
Top
Handle
Program selector
Detergent dispenser
Name of Parts
Door
Porthole
Function selector
Caution and Warning symbols
Bottom plaque
This diagram may be slightly different from the layout of the washing
machine you have just purchased due to techincal improvements
For your safety,any instructions in this manual with this
"Warning"sign must be followed strictly.
For your safety and to prevent damage to the washing
machine,any instructions in this manual with this "Stop"
sign must be followed strictly.
ON/OFF button
3

HK-1207TVE ME
Matters Needing Attention
Safety
1.
.A separate earthed socket is required for the
power supply. The washing machine must be
positioned so that the plug is accessible.
2. Hold the plug and not the electric cable when
unplugging the washing machine.
3.Fuses in the power circuit should be rated for 15A.
If the supply cord is damaged, it must be replaced
by the manufacturer, a service agent or a
qualified persons in order to avoid a hazard.
4. Do not touch or use the washing machine when
bare-footed or when your hands or feet are wet.
5.Do not use flammable detergent or dry clean
ing agent; Do not use flammable spray in close
vicinity to the washing machine; Do not remove
or insert the plug in the presence of flammable
gas.
6. The door of the washing machine will become hot
during the heating process.Avoid contact with the
door during the heating process. For safety, keep
children away from the washing machine.
7. Keep children away from the packing materials after unpacked.
1
Ensure carpet does not obstruct the opening in the bases.
The appliance is not instruct for use of young children of infirm
persons without supervision.Young children should be supervised
to ensure that they do not play with the appliance.

HK-1207TVE ME
8.The washing machine should not be installed
outdoors or in a damp place. In the event of water
leakage or splashes allow the machine to dry
naturally.
10.Keep away from heat sources and direct sunlight
to prevent plastic and rubber components from
aging.
11.During installation, ensure that the electric
cable is not trapped by the washing machine
and avoid damage to the electric cable.
During Use
1. Before use, check the joins on the filling hose,
the tap and the drainage hose for possible
problems from water pressure fluctuations.
If joints are loose or there is leakage, turn
off the tap and repair. Do not use the washing
machine until the hoses are properly fixed.
2.
Keep the door slightly open when the washing
machine is not in use to prevent formation of
odors. Do not cover the washing machine in a
way where dampness can occur inside the
machine.
Matters Needing Attention
9. The carpet must not obstruct the ventilation
openings in the base of the washing machine.

HK-1207TVE ME
3. Do not place heavy, heating source or wet articles
on the top of the washing machine. 4. Do not hot wash foam rubber or sponge-like
materials.
6. Do not open the detergent distribution drawer
during the wash cycle..
7. The door is fitted with a self-lock device and may
stay locked 2~3 minutes after the washing
machine stops. Do not force the door open. Do
not open the door if water level can can seen in
porthole.
8. After each wash program, turn off the tap to prevent
leakage; and unplug the washing machine and
wipe clean the lower part of the porthole.
Steel wires in bras will pop
out during washing; never
wash bras containing steel
wires.
5. Before washing, do up zippers, buttons and clothes
straps. Put small articles, such as socks, laces
or bras, into a washing bag .
Matters Needing Attention

HK-1207TVE ME
?
Remove all the packing materials (including the
foam base)to prevent vibration during use, as
shown in Fig.1.Upon opening of the package,
water drops may be seen on the plastic bag and
the porthole. This is normal resulting from water
test in the factory.
Fig. 1
?
Check attachments and materials with reference to the following
?
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Before use:
1. Remove the back plate;
2. Remove the three packing bolts on the back plate and take out the
rubber hose;
3. Replace the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be kept in a safe
place for later use)
Fig.3
?
Adjusting the washing machine
There are adjustable feet under the bottom of the washing machine. Before
use, the washing machine should be adjusted, as shown in Fig. 3, so that it
is level.
Fig.2
Model
Qty Name Operation
manual
1
11
1
3
Quality
certificate
Water
hose Drainage holder Plastic plugs
Installation
HK1207TVE/ME

HK-1207TVE ME
F
The appliance is to be connected to the water mains using only new
hose-sets. Old hose-sets should not be reused.
.T
( )
Irefer to
. Contact an

HK-1207TVE ME
6
Operational Functions
G: Power button
Press this button to switch on the washing machine; press it again to switch the machine off.
To cancel a wash program during a wash cycle,please switch the machine off.
A: Ironing-free button
Press this button, and the laundry will be fluffed up at the end of the spinning cycle to
reduce wrinkles.
C:Prewash button
Press this button and the washing machine will automatically start a prewash cycle during
execution of a washing program.
D: Extra rinsing button
Press this button and the washing machine will run an additional rinsing cycle to further clean
your clothes.
E: Super wash button
Press this button,the display will turn on . The " " and " " will display .
The super wash sign will turn off when the super wash program has finished.
F: button
Press this button, 3 load levels : "一一一一" (0-2kg), "二二二二" (2-4kg) and "三三三三"
(4-7kg) will appear on the screen for manual selection before water is filled. After the load is
set, the water content will be automatically adjusted.
L
K
B:Delay button
Press the Delay button before the program is started if necessary. Press the Delay button
once and, the delay time will increase by one hour (the regulating range is from the current
setting to 24 hours). After the delay time is changed, press the Start button to activate the
delay function.
Note: The delay time must be longer than the program time; otherwise, the washing machine
will start the wash program directly.
Super Wash
Temp. Speed
ON/OFF
Easylroning Time DelayPre-wash Extra Rinse
Start
Quick
Spin
Rinse
Intensive Wool
Delicate
Coloured Synthetic
Normal
HK1207TVE
Load
A A
+

HK-1207TVE ME
L: Detergent distribution drawer
There are instructions on the handle of the distribution drawer. Swing
out the drawer, three compartments can be seen.
Compartment 1: Pre-washing detergent. If pre-wash is not selected, do
not add detergent.
Compartment 2: Detergent for all washing programs. Detergent must be
added where pre-wash is selected or not.
Compartment 3: Softening agent, conditioning agent, perfume, etc
K: Display
Remaining time, set temperature, spinning speed, other function information, and error messages
are displayed. Refer to the Display Description
2
3
1
H: Wash programming knob and start button
By turning the knob clockwise or counterclockwise, the required program can be selected;
press the start button to start a program; press it again to pause
I: Speed button
Press this button to set a required spinning speed, which covers 0 rpm to 1200 rpm.
J : Temperature button
Press this button to set a required temperature. The selectable temperature range is
0-90?. (Some programs have temperature limits. Refer to the programming guide)
B+C: combination for keyboard lock
After a program has started, press the delay button and the Prewash button at the same
time for 3 seconds, the keyboard will be locked and "SAFE ON" will appear on the screen.
Press the two buttons again for 3 seconds, the keyboard will be unlocked and "SAFE OFF"
will be displayed. This function is used to protect the washing machine from being disturbed
during operation, such as accidental press of buttons or turning of knobs by children, as this
may affect or suspend the operation of a program. Note: If this function is activated during
a washing cycle, be sure to inactivate it at the end of the cycle when the "End" sign is
displayed.
Caution: If the keyboard lock is not activated, press the Start/Pause button and then cut off
the power, the suspended program will be cancelled after power is resumed. Now turn the
program knob to reselect.
Functions
(0-1200rpm for HK1207TVE/ME)

HK-1207TVE ME
0:49
Note :" " indicates that softener or bleacher can be added if needed;
" ?" indicates that detergent must be added;
" X " indicates that detergent must not be added.
1:25
0:29
0:11
Heavy and
thick fabrics
0:32
2:26
1:41
0:58
0-60
0-60
Mode Selection
Button Position Program
Recommended
Laundry
Selectable
Temperature
Program Time
(At Max
Temperature)
Cotton
Synthetic
Delicate
/Super
Quick
Wash
Single
Wash
Program
Normal
Intensive
Synthetic
Delicate
Super
quick wash
Rinse
Spin dry
White fabrics
Fast-color and
medium soil
fabrics
Fast-color
and heavy-
soil fabrics
Silk
Medium-soil
cotton &
synthetics
Detergent
123
?
?
?
?
?
?
0:46
Wool Wool
?
Program Description Table
0-40
0-40
0-40
0-90
0-90
Coloured

HK-1207TVE ME
7kg 4kg 2kg
9
Preparation
1.Power supply
Plug in the power supply
(220-240)V~/50HZ
2.Water supply
Turn on the tap ensure that the water in clear.
Caution:Before staring the washing machine turn on the water
tap to ensure the water tap and the water inlet hose are
connected correctly and do not leak
4.Detergent selection
Only special low foam detergent should
be used in automatic drum washing
machine,for blended or wool fabrics
special deter-gent should be used.dry
cleaning solvent should not be used
such as trichhloroethy-lene or alike
(caution :load the required amount of
detergent only).
3.Laundry treatment
Sort out clothes according to type and extent of dirt.There are
three types of clothes:cotton,synthetical and woolen (silk) fabrics.
Separate white clothes from coloured.If whites and coloureds
are combined for one load,make sure the coloureds are colourfast
-Clothing with frayed edges or yams should be put in a wash
bag or special bag before washing
-repair damaged clothing,lose buttons damaged zips or
and hooks before washing.
-Bed sheets and table ware should be loosely loaded and not
folded.
This washing machine is for househould use and designed
for mechanically washable clothes.When washing,separate
unwashable clothes with reference to clothes labels.
5.Wash Load
Type
Max Load
non-fade cottens Delicate fabrics Woolen fabrics

HK-1207TVE ME
Washing Procedure
Notes: 1) When first using the washing
machine,let it run unloaded for one program
to prevent the laundry from being tainted by
oil or dirty water from the washing machine.
2) Do not overload the washing
machine.
To get the best washing effect, an appropriate wash program should be selected according
to the laundry type.
Note: The above operations refer to conditions without power-off memory. Or the washing
machine will continue operation from where the program was broken. To clear memory,
press the Start/Pause button. Turn off the power for a few seconds and turn on again, all
the settings will be renewed.
1. Loading
Slide out the detergent drawer and put the required detergent and
softening agent into the corresponding boxes. Push back the drawer gently.
Caution:
1) For pre-washing program, detergent should be added to both
compartments 1 and 2. Compartment 2 allows only solid detergents.
For other programs, do not add detergent to compartment 1.
2) Do not overuse softener; otherwise, it will damage the artificial
fibers. Refer to the instructions during use.
2. Adding detergent
3. Selecting wash program
Load Reference
?
Overalls
(cotton appr 950g)
?Blended fabric
clothes
(appr 800g)
?
T-shirt
(cotton
appr 300g)
?Jackets (cotton
appr 800g)
?Woolen
blankets
(appr 3000g)
?Single bed sheets
(cotton appr 800g)
?Socks (blended
fabrics appr 50g)
?
Underwear
(blended fabrics appr 70g)
? Jeans
(800g)
?Pajamas
(appr 200g)
?Shirts
(appr 300g)
10
Open the door, put in the laundry piece by piece.
Close the door tightly.

HK-1207TVE ME
Hints for Saving Energy
5. Function buttons
Select functions as required (refer to the "Operational Functions" section).
6. Washing
Press the Start / Pause button, the indicator at the upper left corner of the button will blink
and the washing machine starts operation.
Hints for saving energy
During operation
1. Collect clothes for one full wash load.
2. Do not overload the washing machine.
3. Pre-wash heavily soiled clothes.
4. Reduce the amount of detergent or choose standard or delicate wash
programs for slightly soiled clothes.
5. Choose a proper washing temperature. Only exceed 60
? for heavily
soiled clothes.
6. Do not use more detergent than required.
7. Softening agent makes clothes feel softer and easier to iron.
?
7. Finish
The washing machine will stop operation automatically when a wash cycle ends. The "End" sign will
appear. Open the door and take out the laundry. Then turn off the tap and unplug the power cable.
4. Setting wash temperature
Press the temperature button until "_ _ C" is displayed, select an appropriate temperature as required
(refer to the "Guide to Operational Program Selection").
11
o

HK-1207TVE ME
4. Clean the filter (once a month)
1) Push out the outer cover (Fig. 1);
2) Screw out filter by turning counterclockwise (Fig. 2);
3) Clean with running water;
4) Replace the filter by turning clockwise and remount the
cover.
Caution: The filter must be in place, or it may lead to
leakage.
Fig.1
Fig.2
Fig.3
Fig.(a)
water
increase
to a different

HK-1207TVE ME
13
Troubleshooting
The following circumstances do not constitute problems. Do not contact the maintenance service
until the problem has been confirmed.
Problem
Possible cause
The washing machine fails to operate
Poor connection to power supply
Power failure
Door is not properly closed
(It will show E1)
Machine has not been switched on
Washing machine does not fill up
with water
Water tap is not turned on
(It will show E5)
Water pressure is less than 0.03MPa
The inlet hose is kinked
Water supply failure
The program dial is not properly set
The door is not properly closed
The inlet hose filter is blocked
The machine is draining while also
being filled
The height of the drainage hose is below 80cm (it
should be within 80-100cm)
The drainage hose end is in water
Drainage failure
Drainage hose is blocked (It will show E2)
Drainage hose end exceeds 100cm above the floor
level
The filter is blocked
Strong vibration during spin drying
Washing machine is located on an uneven surface
Machine load is over 7kg.
Not all foam packing has been removed from the motor
Operation stops before completion
of a wash cycle
Water or electricity failure
Washing machine is in soak cycle
Operation stops for a period of time
Washing machine is in soak cycle
Washing machine gives an error message.
Excessive foam in the drum, which
is spilled to the distribution drawer
The detergent is not a low-foaming type or for manual
wash
Excessive use of detergent
Not all packing bolts have been removed

HK-1207TVE ME
14
Technical Specifications
Model
Power supply
Power(Max)
Water pressure (MPa)
Washing power(W)
Spinning power(W)
Max. wash load (kg)
Spinning speed (MAX) (r/min)
Wash program
Heating power (W)
Weight (kg)
Anti-Electric Shock
Anti-Water Class
HK1207TVE/ME
(220-240)V~/50Hz
1200
9
1800
72
0.03 P 1
<<
200
550
7
2000W
If using an extension cord or other electrical portable outlet device,ensure they
are not subject to splashing or increase of moisture.
I
IPX4

HK-1207TVE ME
Wiring Circuit
D2
D3
M1
M2
M3B3
M4B4
M5
M6
L2
H1
J12-6
NL
J12-3
J12-4
J12-11
J12-12
J12-4
B1
B2
B5
B6
B7
H2
J12-5
O1
O2
J12-1 N1
J12-2 N2
J12-11
J12-5
P1
J12-7
VH1
J12-8
J12-9
V1
V2
D1
L1
P2
J12-10
M
G
ST-1
ST-2
ST-3
ST-4
ST-5
ST-6
ST-7
ST-8
ST-9
M7
L3
Pressure Switch Heating Element
Electronic Wash Switch
Power Drive PCB
Door Lock
Motor
Drain Pump
Thermostat
Display PCB
Power Switch
VH2
HK1207TVE/ME

Upute za
uporabu
Perilica
HR
BiH
CG
rublja
HK-1207TVE
HK-1207TVE ME