
GB 3- Control panel
9
3.5 Funct ion but tons
The function buttons (Fig. 3- 6) enable additional op-
tions in the selected programme before programme
starts. The related indicators are displayed.
-
gramme, all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
To delete t he sett ing or to cancel the setting process,
press t he function button until the desired LED lights
3- 6
3.5.1- Funct ion but t on “Temp.“
Press this button (Fig. 3- 7) to change t he washing
temperature of the programme. If no value is illumi-
nated the water will not be heated.
In conjunct ion with the “Steam” button, t he child lock
3.5.2- Funct ion but t on “ Speed”
Press t his button (Fig. 3- 8) to change or deselect the
spin of the programme. If no value is illuminated the
laundry will not spun.
Not e: Factory sett ings
there is no special requirement default settings are recommended.
3.4 Det ergent drawer
Open the drawer, t hree compartment s can be
seen (Fig. 3- 5):
Compart ment 1 : Water inlet only, no detergent
Compart ment 2 : Detergent for programme
Compart ment : Softener, Conditioning agent etc.
The recommendation on the type of detergents is
suitable for the various washing temperatures, please
refer to the manual of detergent.
3- 5
3.5.3- Funct ion but t on “ St eam“
3- 7 3- 8
Press this button (Fig. 3- 9) to act ivat e the steam funct ion.When this funct ion is activated
the default temperature is the maximum temperature of t he programme selected.This
function can be activated only with the following programmes: Cotton, Synt het ic, Mix,
Baby Care, Hygiene.When the function is act ivated t he led above the button will light up.
Pushing again this button the funct ion can be deactivated and the led above the button
will turn off.When the function is activated the temperature of the programme cannot
be changed.
( )
3.5.1 3.5.2 3.5.3 3.5.4 3.5.5