Haier HWM55-10 User manual

Full Automatic Washing Machine
with Pump
This manual is for
Please read this manual
carefully before using.
Retain it for future reference.
HWM55-10
User's manual
0030806972C

Contents
Names of the parts................................................................................................1
Safety precautions ................................................................................................2
Installation and adjustment ...................................................................................4
Preparation before washing .................................................................................7
Put in the laundries ..............................................................................................8
Usage of the detergent ........................................................................................8
Use the operation buttons ..................................................................................9
Close the top lid .................................................................................................13
Finish washing ....................................................................................................13
Disposal after washing .......................................................................................14
Trouble shooting Answer to question............................................................15
Packing list *Specifications................................................................................................16

Meaning and description of the symbols
Names of the parts
Warning sign
Forbidden sign
Contents marked with that symbol are related to the
safety of the product and the personal safety of the
users. Please operate in strict conformity to the contents,
otherwise it may cause damage of the machine or
injure the personal safety of the user.
Contents marked with that symbol are actions forbidden
to perform. Performing of those actions may result
in damage of the machine or injure the personal
safety of the user.
1
Adjustable foot
Fixed foot (3)
ack cover
Cabinet
ase frame
Drain hose
Control panel film
Control panel
Filter cover
Pulsator
Inner tub
Detergent box
Top lid B
Cabinet handle
Water valve
Top lid A
Lint filter
(Installed by user)
Water absorption cushion

Safety precautions
Do not damage the power cord, bend , extend, twist, bind or alter it by force.
Do not press or nip it with weight. If the power cord or the power plug is bad,
or the power plug becomes flexible, to avoid risk it is required to have it replaced
by the technicians of our special shop or the after-sale service department.
Keep the pin of the power plug clean, if the power plug is polluted
with dust, please wipe with dry cloth carefully.
The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle, when
moving the machine, or when cleaning
the machine. Do not use wet hand to ins-
ert or pull out the power plug.
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose,
do not use the plug any more.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
Do not use water hotter above 50 C .
soft items
The ventilation holes
at the bottom
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
Please plug the plug on special receptacle
with rated voltage. Be sure to use single-
phase three pins receptacle. Ensure the
earthing prong of the power receptacle is
earthed reliably. Use leakage protector if
possible.
2

Safety precautions
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children. Do not let the children
climb the washing machine.
Petrol
Thinner
Dismantle Install
To prevent the lint inside the tub from blocking
the cascade outlet during washing, please
keep the lint filter in good condition, and
install it to proper position. If the lint filter
is lost or damaged, please contact the local
after-sales service department of our company.
Toprotect your laundries and wash-
ing machine, please take out all of the
coins, buttons, sand, hairpin and
other foreign materials before washing.
Please check if the water faucet is open,
and if the connection of the water inlet
pipe is proper.
It is suggested to use foamless washing
powder.
3

Installation and adjustment
The largest allowed slope of the
shank base of the machine is 2 .
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:
Adjust the adjustable foot:
Install the bottom plate
After you open the package, please lean
the washing machine gently down on soft
items ( like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of the
machine with the eight screws by a cross
screwdriver, then lift the machine up gently.
See to the figure:
Adjust the installation position
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Push the lint filter downward to
location for lint filter.
1.To twist the adjustable foot, please
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
the foot.
2.Fasten the nut after adjustment.
Loosen Fasten
High Low
adjustable nut
adjustable foot
Install the lint filter
4
Back
Front
Bottom plate
Screw
Soft items

How to change the direction of the drain hose
Usage of the drain hose
The drainage shall be smooth with the drain hose
1.Put the drain hose up to suitable position.
Do not put it on ground.
Notes: the mouth of drain pipe should higher
than the water level of washing tub for
avoiding to siphon phenomenon during
drain.
Do not tramp or press the drain hose.
Mouth of
drain hose
<1.2m
0.7m<H
5
1Dismount the back cover of the
washing machine.
3 protrude the drain hose from the hole
on the right side of the bottom, and fast
it onto the bottom with the rack and screws.
Set the bracket on the drain hose .There
is a hole on the cabinet to hang the drain
hose (as figure 3).
2Take off the drain hose frame. Put
down the drain hose. Take off the
drain hose rack. As indicated in
Figure 1 Pull the drain hose into the
cabinet from the left side of the bottom
(as figure 2).
Figure 1
Figure 2
4 install the back cover as what it looks
before.
Drain hose rack Figure 3

Install the water inlet hose
6
1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE: Do not over tighten. Damage to the valves can result.
2. Connect the other ends to the water inlet valve .
( As figure 2)
Figure 1 Water absorption cushion
Jointer of the water inlet hose
Jointer of the
water inlet valve
Figure 2
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap is firm,
so as to prevent dropping from improve Installation
position.
1.After using, Close the water tap.
2. Pull off the water inlet hose from the water tap and washer
Take down the water inlet hose
Check the connection between the jointer of
the water inlet hose and the water tap

Preparation before washing
Confirm if
there's special
requirment for
the laundries.
Clear the pocket.
Take out the
coins , sand,
hairpins etc.
Fasten the
buttons and
zippers.
When the pulsator
is running , the
buttons of the
laundries may
cause noise. For
the sake of
discretion, please
put the laundries
with buttons into
other laundries.
Preparation before washing
1.Connect the water inlet hose and open
the water tap .
2.Confirm that the washing machine is
earthed reliably . Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
3.Hang up the drain hose.
The quantity of
the laundries
shall not exceed
the rated value.
The big laundries
like the jeans
shall be put in
loosely.
Pay attention to followings before washing the laundries
a.Please check if the laundries are applicable for washing.
b.Separate those not colorfast from other laundries.
c.For laundries not water absorbing, please put them into water with hands.
d.For laundries with much soil, please remove the soil first. You can add detergent on the
part with serious soil directly. It is much easier to remove the soil by that mean.
e.For laundries likely to get lint ball or with long fiber, please first turn the inside out before
putting them into the water.
f.Do not put the laundries polluted with chemicals directly into the washing machine.
g.For those small laundries ,laundries likely to be twisted or worn, and woolen laundries,
please put them into mesh bag before washing.
7
4.Slanting or uneven ground may result in
unstable working or abnormal noise. Please
make the machine stand horizontally.

The capacity of washing and spinning of the
machine refer to the largest weight of the
standard laundries under dry condition that
can be washed or spinned in onetime. One
time washing quantity shall be lower than the
rated capacity.
The thickness, size, type ofthe cloth will inf-
luence the actual washing capacity. It is sui-
table for one time washing to put in reasona-
ble amount of laundries and the laundries can
be turned round in washing.
Do not select high water level for laundries
less than 1.0kg, so as to avoid splashing of
water.
Towash thin laundries like the stocking, silk
etc., please first put them into washing mesh
bag (which can be purchased separately)
before wash.
Put in the laundries
How to usethe whitener
Fill water todecided level. Dilute
the whitener with container. Pour
it slowly into the washing tub.
Avoid using whitener on
laundries with color or pattern as
they are prone to lose color.
The whitener shall not touch the
laundries directly.
Refer to the user's manual for
the usage and quantity of the
whitener.
For powder whitener, please
dissolve it before use.
Inlet box of the detergent
How to use the washing
powder
Direct dissolved inthe machine
1.Fill water to"Low" water level.
2.Add the power. Run for30 seconds
to dissolve itcompletely.
3.Put in thelaundries. Select
suitable water level.
The instant dissolvingof the washing
powder:
1.Prepare warm waterof 30 and a
container.
2.Add the powderwhile stirring to
fully dissolve it.
Put in theproper quantities detergent
according to thewater level andthe
laundries quantities .
It is suggestednot to usehigh
sudsing detergent.
Washing powder with poor qualityor
long time storagemaybe caked.
Please pay attention to cleaning the
detergent box intime
Usage of the detergent
8