Haier WDNS115BW User manual

Hot and Cold Water Dispenser
Chaude ou Froide Distributeur d'Eau
Fría y Caliente Urtidor de Agua
User Manual
Guide de l’Utilisateur
Manual del Usuario
WDNS32BW, WDNS115BW, WDNS121SS

1
English
SAFETY PRECAUTIONS
When using this appliance, always exercise basic safety
precautions, including the following:
1. Read all of the instructions before using this appliance.
2. Use this appliance only for its intended purpose as described in this use and
care guide.
3. This water dispenser must be properly installed in accordance with the
installation instructions before it is used. See the grounding instructions in the
installation section.
4. Never unplug your water dispenser by pulling on the power cord. Always
grasp the plug firmly and pull straight out from the outlet.
5. Repair or replace immediately, all electric service cords that have become
frayed or otherwise damaged. Do not use a cord that shows cracks or
abrasion damage along its length, on the plug or at the connector end.
6. Unplug your water dispenser before cleaning and making any repairs.
Note: If for any reason this product requires service, we strongly
recommend that a certified technician perform the service.
7. This water dispenser should not be recessed or built into an enclosed
cabinet. It is designed for freestanding installation only.
8. This appliance is designed for INDOOR USE ONLY and should not be
used outdoors.
9. Do not operate your water dispenser in the presence of explosive fumes.
10. Close supervision is necessary when any appliance is used by or
near children.
11. To protect against electric shock, do not immerse the cord, plug, or any other
part of the water dispenser in water or other liquids.
SAVE THESE INSTRUCTIONS
Thank you for purchasing our Haier
product. This easy-to-use manual
will guide you in getting the best
use of your water dispenser.
Remember to record the model and
serial number. They are on a label
in back of the unit.
Model number
Serial number
Date of purchase
Staple your receipt to your manual. You will need it to obtain
warranty service.

English
2
PAGE
SAFETY PRECAUTIONS ...................................................................... 1
PARTS AND FEATURES ...................................................................3-5
INSTALLATION INSTRUCTIONS ......................................................6-7
START-UP INSTRUCTIONS.................................................................. 8
OPERATING YOUR WATER DISPENSER............................................ 9
Cold/Hot Water Release Buttons ............................................................. 9
Cold/Hot Water Release Levers............................................................... 9
Cold/Hot Water Power Switches ............................................................. 9
Cold/Hot Water Indicator Lights............................................................10
ELECTRICAL CONNECTIONS.............................................................10
Grounding Instructions..........................................................................10
Wiring Requirements............................................................................10
Extension Cords...................................................................................10
Power Interruptions...............................................................................10
PRECAUTIONS..................................................................................11
PROPER CARE AND CLEANING ................................................ 11-12
General ..............................................................................................11
Cleaning the Condenser Coils...............................................................12
For Long Vacations or Absences / Moving .............................................12
TROUBLESHOOTING GUIDE ............................................................13
WARRANTY......................................................................................14
TABLE OF CONTENTS

3
English
1. Water Receptacle
2. Cold Water Button
3. Removable Drip Tray
4. Removable Shelf
5. Storage Compartment
6. Hot Water Button
7. Child Safety Lock
8. Hot Water, Cold Water and
Power Indicator Lights
9. Drain (not shown/back of unit)
10. Cold Water Switch (on back)
11. Hot Water Switch (on back)
1
2
3
76
8
5
4
PARTS AND FEATURES - WDNS115BW

4
English
1. Water Receptacle
2. Cold Water Button (Blue)
3. Removable Drip Tray
4. Storage Compartment
5. Hot Water Button (Red)
6. Child Safety Lock
7. Hot and Cold Water Indicator Lights
8. Drain (not shown/back of unit)
9. Cold Water Switch (on back)
10. Hot Water Switch (on back)
1
3
2
7
5
4
PARTS AND FEATURES - WDNS32BW
6

5
English
1. Water Receptacle
2. Cold Water Button
3. Removable Drip Tray
4. Hot Water Button
5. Child Safety Lock
6. Hot Water, Cold Water and
Power Indicator Lights
7. Drain (not shown/back of unit)
8. Cold Water Switch (on back)
9. Hot Water Switch (on back)
5
1
2
4
3
6
PARTS AND FEATURES - WDNS121SS

6
English
1. Remove all packing materials. This includes the foam base and all adhesive
tape holding the accessories inside and outside.
2. Inspect and remove any remaining packaging, tape and printed material
before turning on the water dispenser.
Note: Allow the water dispenser to stand in an upright position for at least
12 hours before turning on the power.
PROPER LOCATION
• To ensure that your water dispenser works at the maximum efficiency it was
designed for, you should install it in a location where there is proper air
circulation and electrical connections.
• The following are the recommended clearances around the water dispenser.
Sides 2" (50mm)
Back 4" (100mm)
• Do not install your water dispenser in any location that is not properly
insulated or heated because the unit is not designed to operate in room
temperature below 55˚F / 13˚C. The water dispenser is for indoor use only.
Room temperature should not exceed 97° F / 36° C.
Note: Thermostats maintain the hot and cold water temperatures
automatically. On the compressor cooled water coolers the hot water
temperature will be between 190˚-203˚ F/ 88˚- 95˚ C and the cold
water temperature will be between 43˚- 50˚ F/ 6˚-10˚ C.
• Select a suitable location for the unit on a hard even surface away from
direct sunlight and heat sources (e.g., radiators, baseboard heaters, cooking
appliances, etc.).
CAUTION: DO NOT plug in the water dispenser until full bottle is
installed first and water flows from both Hot and Cold
water faucets.
Note: Hot and cold water will not be instantly available as the unit will need
time to heat up and cool down the water.
INSTALLATION INSTRUCTIONS

PREPARATION BEFORE FIRST OPERATION
Before connecting the unit to the power source, Let it stand upright for
approximately 12 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
The water dispenser is pre-cleaned at the factory but the reservoir and water
lines should be flushed with fresh water before use as follows:
1. Do NOT plug in the water dispenser.
2. Check and make sure the drain cap on the back of the water dispenser is
firmly closed.
3. Fill water tank with tap water full to capacity, wait 5 minutes until water settles.
4. Activate the child safety button and press the hot water lever until water starts
to come out, then stop.
5. Plug the dispenser into the electrical socket.
6. Press the hot water switch (back of unit) to the ON position, the switch should
be lit.
A. Press the cold water switch (back of unit) to the ON position, the switch should
be lit.
B. Wait for the hot water to reach temperature in approximately 10 minutes
C. Wait for the cold to reach temperature in other 40 minutes approximately.
7. Press the hot and cold water switch to turn them OFF and unplug the dispenser
from the electrical outlet.
8. Drain the water by pressing hot water button and then cold water button, until
no more water remains (to facilitate this operation, use a large container).
9. Drain any water left in the tanks by opening the drain cap located on the back
side of the dispenser, until the water drains completely. Please remember to
close the drain cap firmly after the drainage.
10. Place a 5 gallon or 3 gallon bottle of water onto the water intake of the
dispenser; allow water to stand for approximate one minute.
11. Push water faucet buttons to insure water flows from both faucets.
12. Plug the dispenser into the electrical socket.
13. Now you are ready to use your water dispenser.
7
English

START-UP INSTRUCTIONS
English
8
Read carefully and understand all installation instructions before
installing the water dispenser.
1. Remove the cap from the water bottle first. Lift up the water bottle and quickly
place it into the water receptacle. (The water bottle is not included.)
2. DO NOT plug in the water dispenser until you have checked that
water flows out of both faucets when the hot and cold water
release levers are pressed. Never turn on the water dispenser
without water. Doing so may cause the unit to catch fire or
malfunction.
3. Check that water flows out by pressing both the hot and cold water faucets
one at a time.
4. Plug the power cord into an 115volt / 60 Hz outlet.
5. To activate the water heater and cooler, press the hot water and cold water
switches to the ON position, the switches should be lit.

This water dispenser maintains instant hot and cold water for your cooking and
drinking needs. It accepts 3 or 5-gallon water bottles.
WDNS121SS/WDNS32BW COLD (BLUE) / HOT (RED) WATER
RELEASE BUTTONS
• Press the button down to release the water flow.
• Pull the tap lever up to stop the water flow.
Note: The hot (red) water button is equipped with a child safety
lock to prevent accidental spilling of hot water. To release
the hot water flow, the tap lever must be squeezed and
then pushed down.
WDNS115BW COLD / HOT WATER RELEASE LEVERS
Press the button to release the water flow.
Note: The hot water faucet is equipped with a child safety lock to prevent
accidental spilling of hot water. To release the hot water flow, push the
child safety lock button down and as you push in the hot water button.
Caution: Be careful when carrying hot water in your cup or container to avoid
any injury or harm from spills.
COLD (GREEN) / HOT (RED) WATER POWER SWITCHES
(Back of unit)
Cold Water Switch (green):
The cold water switch activates the cooling process when turned ON.
• Press the switch to the ON position. The switch should become lit.
Note: When turning on the unit for the first time, it will take some
time to chill the water.
Hot Water Switch (red):
The hot water switch activates the heating process when turned ON.
• Press the switch to the ON position. The switch should become lit.
Caution! Be careful when carrying hot water in your cup or container
to avoid any injury or harm from spills.
OPERATING YOUR WATER DISPENSER
English
9
COLD HOT
HOT
COLD
COLD HOT
COLD HOT
HOT
COLD
COLD HOT

GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the
electric current. This appliance is equipped with a cord containing a grounding
wire and a grounded plug. The plug must be inserted into an outlet that is prop-
erly installed and grounded.
• Improper use of the plug may result in the risk of electric shock.
• Consult a qualified electrician or service technician if the grounding
instructions are not completely understood or if in doubt as to whether
the appliance has been properly grounded.
WIRING REQUIREMENTS
This appliance must be plugged into a 15Amp, 115 Volt, 60Hz
GROUNDED OUTLET.
Note: Where a standard two-prong outlet is encountered, it is the personal
responsibility and obligation of the consumer to have it replaced with a
properly grounded three-prong outlet.
EXTENSION CORDS
We do not recommend the use of an extension cord with
this unit.
POWER INTERRUPTIONS
Occasionally, there may be power interruptions due to thunderstorms or
other causes. Remove the power cord from wall outlet when a power out-
age occurs. When power has been restored, re-plug the power cord into
wall outlet.
ELECTRICAL CONECTIONS
English
10
HOT
HOT
POWER
COOL
COLD
COLD (GREEN) / HOT (RED) WATER INDICATOR LIGHTS
When the green and red lights are illuminated on the front of the unit, the heating
and cooling process is in progress. When the cold and hot water has reached
their proper temperatures, both lights will turn off automatcially. Normally, hot
water reaches proper temperature first.
WDNS115BW WDNS32BW

11
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of
appliance, unless they are of the type recommended by the manufacturer.
• To avoid a hazard due to instability of the appliance, it must be fixed in
accordance with the instructions.
Caution: Before using any cleaning product, always read and follow the
manufacturer’s instructions and warnings to avoid personal injury and/
or product damage.
Note: It is best to clean the dispenser and its surrounding area when replacing
the empty bottle with a new one. This way you can move the unit easily
without the weight of the bottle.
GENERAL
• Before cleaning, place a dust cover on top of the water guard to prevent dust
and debris from going into the dispenser while cleaning.
• Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with
warm water. Use a sponge or a soft cloth dampened with the cleaning solution
to wipe down the unit.
English
PROPER CARE AND CLEANING
PRECAUTIONS

English
12
• Wipe with clean warm water and dry with a soft cloth.
• Do not use harsh chemicals, abrasives, ammonia, chlorine bleach, concentrated
detergents, solvents or metal scouring pads. Some of these chemicals may
dissolve, damage and/or discolor the unit.
• The spilled water in the drip tray must be removed regularly and cleaned
properly to avoid any bacteria and residue build-up.
• We recommend that you clean the water dispenser at least twice a year. When
cleaning, you do not need to take anything apart. Simply pour the baking
soda/water solution through the water guard. Then rinse with plenty of water
and allow the water to drain.
• Remove the accumulated water from the drip tray, and wipe the compartment
clean.
CLEANING THE CONDENSER COILS
We recommend that you move the dispenser away from the wall and vacuum
or brush the coils on the rear of the unit at least 4 times a year. Some operating
environments may require more frequent cleaning.
FOR LONG VACATIONS OR ABSENCES / MOVING
• Turn OFF water dispenser.
• Unplug the unit.
• If bottle still contains water, remove it quickly and
carefully to avoid spillage.
• Put a container or bucket on the floor under the drain on
the back of the unit to catch the water released from the
drain tube.
• Remove the drain plug located on the side of the unit to
release the water and empty both the tanks.
Note: Remove drain plug by turning it in a “clockwise direction”. Please note not
to use any tools to remove or install the drain plug. Use hands only.
• After completing the drain process, replace the drain plug to its
original position.
• You must store the unit at room temperature.
• Avoid storing the unit where the temperature is at or below freezing.
• When moving, the unit must be moved vertically. DO NOT move the unit in
horizontal position as this may cause possible damage to internal parts.
• You must cover the unit to avoid dust and debris from entering the
water guard.
COLD HOT
WARNING!
Always unplug the unit before cleaning to avoid electric shock.
Failure to do so may result in death or injury.

13
English
If the power is switched on and the compressor will not start up:
• Make sure the power cord is plugged in properly
• If the water dispenser is brought indoors in the winter, give it a few hours to
warm up to room temperature before plugging it in. Cold bottled water or
the temperature of the water dispenser itself may affect the thermostat setting.
If the room temperature is lower than the thermostat setting or the water
dispenser itself is cold the compressor will not start up. We do not advise
that you make any adjustments to the thermostat setting.
If water dispenser operation is noisy:
• Make sure the water dispenser sits on a level surface. If the dispenser is
noisy after its first use, unplug it for half an hour and try again.
If the condenser becomes too hot:
• When the compressor is working, it is normal for the condenser to be hot. If
you are concerned that the temperature is too high, check to see that there is
enough room around the water dispenser to allow proper ventilation.
If the cold water tap doesn’t work and the cold water tank freezes
• The cold water tap may freeze under extreme conditions. If the water is
not being used, the cooling compartment is loaded and the compressor is
running continuously, the cold water tank can freeze.
• To thaw the cold water tank, turn off the power, unplug the unit and remove
the water bottle. Keep draining hot water and pouring it back into the water
receptacle. Once the tank has thawed, place the bottle on the unit, plug the
unit in again, and turn the hot and cold switches back on.
If the water is not cold enough:
• This is due to either a compressor malfunction or the cold water may be in
the OFF position.
• Check if the cold water is in the ON position.
• Cold water is used very frequently.
If water is dripping from the dispenser onto the floor:
•The water bottle may have small pinholes or cracks and may be leaking.
• The drain plug in the rear may be improperly fastened. Check that the soft
rubber seal is not torn or damaged.
• The drip tray may be full of water. Take out the drip tray and empty it before
replacing it.
TROUBLESHOOTING GUIDE

14
English
What is covered and for how
long?
This warranty covers all defects in
workmanship or materials for a period
of:
12 months labor (carry-in only)
12 months parts
The warranty commences on the date
the item was purchased and the origi-
nal purchase receipt must be presented
to the authorized service center before
warranty repairs are rendered.
EXCEPTIONS: Commercial or
Rental Use warranty
90 days labor (carry-in only)
90 days parts
No other warranty applies
What is covered.
1. The mechanical and electrical parts,
which serve as a functional purpose
of this appliance, for a period of
12 months. This includes all parts
except finish, and trim.
What will be done?
1. We will repair or replace, at our
discretion, any mechanical or
electrical part which proves to be
defective in normal usage during the
warranty period so specified.
2. There will be no charge to the
purchaser for parts and labor on
any covered items during the initial
12
month period. Beyond this period,
only parts are covered in the
remaining warranty. Labor is not
provided and must be paid by the
customer.
3. Contact your nearest authorized
service center. For the name of the
nearest service center please visit
our website at www.HaierAmerica.
com or call 1-877-337-3639 for
more information.
THIS WARRANTY COVERS
APPLIANCES WITHIN THE
CONTINENTAL UNITED STATES,
PUERTO RICO AND CANADA.
IT DOES NOT COVER
THE FOLLOWING:
Damages from improper installation.
Damages in shipping.
Defects other than manufacturing.
Damage from misuse, abuse, accident,
alteration, lack of proper care and
maintenance or incorrect current or
voltage.
Damage from other than household
use.
Damage from service by other than an
authorized dealer or service center.
Decorative trims or replaceable light
bulbs.
Transportation and shipping.
Labor (after the initial 12 months).
THIS LIMITED WARRANTY IS GIVEN
IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR, INCLUDING THE
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE.
The remedy provided in this warranty
is exclusive and is granted in lieu of all
other remedies.
This warranty does not cover inciden-
tal or consequential damages, so the
above limitations may not apply to
you. Some States do not allow limita-
tions on how long an implied warranty
lasts, so the above limitations may not
apply to you.
This warranty gives you specific legal
rights, and you may have other rights,
which vary, from state to state.
Haier America
New York, NY 10018
LIMITED WARRANTY

1
CONSIGNES DE SÉCURITÉ
Lors de l'utilisation de cet appareil, des consignes de sécurité de
base doivent être respectées, y compris ce qui suit :
1. Lisez toutes les instructions avant d'utiliser cet appareil.
2. N'utilisez cet appareil qu'aux fins prévues, comme il est décrit dans ce guide
d'utilisation et d'entretien.
3. Ce distributeur d’eau doit être installé correctement conformément aux
instructions d'installation avant d'être utilisé. Consultez les instructions de mise
à la terre dans la section traitant de l'installation.
4. Ne débranchez jamais votre distributeur d’eau en tirant sur le cordon
d'alimentation. Saisissez toujours la fiche fermement et tirez-la en ligne droite
pour la sortir de la prise de courant.
5. Réparez ou remplacez immédiatement tous les cordons d'alimentation
électrique qui s'effilochent ou autrement endommagés. N'utilisez pas de
cordon si celui-ci, la fiche ou l'embout du connecteur présente des fissures ou
d'autres dommages causés par l'abrasion.
6. Débranchez votre distributeur d’eau avant de le nettoyer ou de procéder à des
réparations.
Remarque: Si pour une raison ou une autre ce produit nécessite un entretien,
nous vous recommandons fortement de faire appel aux services
d'un technicien agréé.
7. Ce distributeur d’eau ne doit pas être encastré ou incorporé dans une armoire
Il est conçu pour une installation amovible seulement.
8. Cet appareil est conçu pour un USAGE À L'INTÉRIEUR SEULEMENT et ne doit
pas être utilisé à l'extérieur.
9. Ne faites pas fonctionner votre distributeur d’eau en présence de vapeurs
explosives.
10. Vous devez exercer une étroite surveillance lorsque cet appareil est utilisé
par des enfants ou en présence d'enfants.
11. Pour éviter les chocs électriques, n'immergez pas le cordon, la prise ou toute
autre partie du distributeur d’eau dans l'eau ou tout autre liquide.
CONSERVEZ CES INSTRUCTIONS
Nous vous remercions d’avoir choisi ce
produit de la marque Afficionado. Ce
guide convivial vous indiquera com-
ment tirer le maximum de votre cave
á vin.
Rappelez-vous de prendre en note les
numéros de modèle et de série. Ces
numéros se trouvent sur une étiquette
apposée au dos de l’appareil.
Numéro de modèle
Numéro de série
Date d’achat
Brochez votre reçu de caisse à votre guide. Vous en aurez besoin
pour obtenir des services en vertu de la garantie.
Français

2
PAGE
PRÉCAUTIONS DE SÉCURITÉ.............................................................. 1
PIÈCES ET CARACTÉRISTIQUES .......................................................3-5
INSTRUCTIONS D’INSTALLATION ..................................................6-7
INSTRUCTIONS DE DÉMARRAGE ...................................................... 8
FONCTIONNEMENT DE VOTRE DISTRIBUTEUR D’EAU..................... 9
Boutons d’eau chaude/froide.................................................................. 9
Leviers d’eau chaude/froide.................................................................... 9
Interrupteurs d’eau chaude/froide............................................................ 9
Témoins lumineux d’eau chaude/froide ..................................................10
CONNEXIONS ÉLECTRIQUES...........................................................10
Instructions de mise à terre....................................................................10
Exigences de filage..............................................................................10
Rallonges électriques............................................................................10
Interruptions de courant ........................................................................10
PRÉCAUTIONS..................................................................................11
NETTOYAGE ET ENTRETIEN ....................................................... 11-12
Général ..............................................................................................11
Nettoyage des serpentins du condensateur .............................................12
Déménagement/Absences longues.........................................................12
GUIDE DE DÉPANNAGE...................................................................13
GARANTIES ......................................................................................14
TABLE DES MATIÈRES
Français

3
1. Récipient d’eau
2. Bouton pour l’eau froide
3. Égouttoir amovible
4. Tablette amovible
5. Espace de rangement
6. Bouton pour l’eau chaude
7. Verrou de sécurité
8. Témoins lumineux pour l’eau
chaude, l’eau froide et le
fonctionnement
9. Drain (non-illustré/à l’arrière de
l’appareil)
10. Interrupteur d’eau froide
(à l’arrière)
11. Interrupteur d’eau chaude
(à l’arrière)
1
2
3
76
8
5
4
PIÈCES ET CARACTÉRISTIQUES – WDNS115BW
Français

4
1. Récipient d’eau
2. Bouton pour l’eau froide (bleu)
3. Égouttoir amovible
4. Espace de rangement
5. Bouton pour l’eau chaude (rouge)
6. Verrou de sécurité
7. Témoins lumineux pour l’eau chaude
et l’eau froide
8. Drain (non-illustré/à l’arrière de
l’appareil)
9. Interrupteur d’eau froide (à l’arrière)
10. Interrupteur d’eau chaude
(à l’arrière)
1
3
2
7
5
4
PIÈCES ET CARACTÉRISTIQUES – WDNS32BW
6
Français

5
1
2
4
3
6
5
PIÈCES ET CARACTÉRISTIQUES – WDNS121SS
Français
1. Récipient d’eau
2. Bouton pour l’eau froide
3. Égouttoir amovible
6. Bouton pour l’eau chaude
7. Verrou de sécurité
8. Témoins lumineux pour l’eau
chaude, l’eau froide et le
fonctionnement
9. Drain (non-illustré/à l’arrière de
l’appareil)
10. Interrupteur d’eau froide
(à l’arrière)
11. Interrupteur d’eau chaude
(à l’arrière)