Haiwell C Series User manual

Xiamen Haiwell Technology Co., Ltd. www.haiwell.com
Haiwell HMI User Manual
Human Machine Interface
C Series Ethernet HMI User Manual

www.haiwell.com Haiwell HMI - C Series Ethernet HMI User Manual
2 / 5
Contents
1. HMI Notes and Installation Steps...................................................................................................................................................................3
2. HMI Software.....................................................................................................................................................................................................3
3. HMI Interface Definition................................................................................................................................................................................... 3
4. Product Specifications..................................................................................................................................................................................... 3
5. HMI Parts and Panel Cutout........................................................................................................................................................................... 4
6. HMI Calibration................................................................................................................................................................................................. 4
7. Parameter Setting.............................................................................................................................................................................................5

www.haiwell.com Haiwell HMI - C Series Ethernet HMI User Manual
3 / 5
1. HMI Notes and Installation Steps
Notes
Installation direction must be in accordance with the requirement of this manual, the wiring should be in strict accordance
with the guide of the terminal mark, otherwise it will cause product damage or burn up.
There should be sufficient space and distance between the products and other devices to avoid damage to the equipment
caused by poor heat dissipation.
Installation steps
Fit the HMI into the cutout panel and lock the four buckles on the sides with the mount panel.
2. HMI Software
Haiwell HMI uses the Haiwell SCADA software. You can download from haiwell official web:
http://en.haiwell.com.
Haiwell Cloud Service can be got by visiting Haiwell Cloud web (http://cloud.haiwell.com). We
recommend you to use Haiwell Cloud APP.
Haiwell Cloud APP download steps:
1Login in Haiwell Cloud web
2Scan the two-dimension code in the right
3Search "Haiwell cloud" in the IOS Iphone APP store
3. HMI Interface Definition
C7/C10 HMI interface definition
COM1 interface definition
COM2 interface definition
Pin
Definition
Pin
Definition
Pin
Definition
Pin
Definition
1
RS422 TX+/RS485 A+
2
RS232 RXD
1
RS232 RXD
2
RS232 TXD
3
RS232 TXD
4
CANL
3
GND
4
RS485 B-
5
GND
6
RS422 TX-/RS485 B-
5
RS485 A+
7
CANH
8
RS422 RX-
9
RS422 RX+
4. Product Specifications
Model
Contents
C7 HMI
C10 HMI
Power
Input power
24VDC±20%
24VDC ±20%
Power consumption
5W
9W
Power isolation
Built-in
Built-in
Voltage resistance
500V AC
500V AC
Isolation resistance
Exceed 500MΩ@500VDC
Exceed 500MΩ@500VDC
Vibration endurance
10～25HZ (X, Y, Z direction 2G/30 minutes)
10～25HZ (X, Y, Z direction 2G/30 minutes)
Environment
Cooling type
Ventilation cooling
Ventilation cooling
Protection structure
IP65
IP65
Storage temperature
-20～70℃
-20～70℃
Operating
temperature
-10～60℃
-10～60℃
Relative humidity
10～90%RH（non-condensing）
10～90%RH (non-condensing)
Specification
Enclosure
Engineering Plastic ABS (Flame-retardant level)
Engineering Plastic ABS (Flame-retardant level)
Dimensions
200×146×37mm
270×212×35mm
Panel cutout
193×138mm
260×202mm
Weight
0.74kg
1.2kg
Certification
CE certification
Comply with CE certification standard
Comply with CE certification standard

www.haiwell.com Haiwell HMI - C Series Ethernet HMI User Manual
4 / 5
5. HMI Parts and Panel Cutout
C7/C10 HMI C7 HMI C10 HMI
6. HMI Calibration
HMI is calibrated at the factory. If you need to recalibrate, enter the parameter setting interface, select "Hardware Setup>
Display&Voice> Touch Calibration", the following interface will appear:
Haiwell HMI
Touch crosshair to calibrate
Click the upper left corner, the upper right corner, the lower right corner, the lower left corner, the center point of the '+' in turn,
you can restart.
C7/C10 HMI parts description
1
Liquid crystal and touch screen
2
Indicator light
3
Power slot
4
COM2
5
Wifi
6
Double-deck USB
7
COM1
8
LAN
C7 panel cutout
C10 panel cutout

www.haiwell.com Haiwell HMI - C Series Ethernet HMI User Manual
5 / 5
7. Parameter Setting
Hold down the upper right corner of the screen for about 5-10 seconds, the following screen appears:
Select the hardware settings, enter the parameters settings screen of touch-screen, you can set the network parameters, display
and sound parameters, time parameters, etc., after the modification, click“Save”to take effect immediately.
Simplified Chinese
Project Setting Hardware Setting System Information
Back
Cloud
Local Project, Network Project
Network settings, Display&Voice, Time Settings,
Machine, Application
Thanks for choosing Haiwell HMI, If you have any questions about our products or services, please let us know!
Haiwell website: www.haiwell.com Copyright © 2005 Xiamen Haiwell Technology Co.,Ltd.