HALCON CREW User manual

FEATURES AND OPERATIONS
www.HALCONfurniture.com
REV 11/3/2021
CREW
mobile tables

2
www.HALCONfurniture.com
CREW
introduction
table of contents
P 03 features
Table Ganging
Quick Connect Cable Management
Power / Data Distribution
Auto Floor Grip
Concealed Casters
P 04 operation
Folding and storage
P 05 operation
Moving tables
P 06 grouping
Table Configurations
P 07 table ganging
Ganging Mechanism
P 08 power / data
Power / Data Grommet
Power Inlet
Data Inlet
P 09 power / data
Double Sided Power
Single Sided Power
P 10 storage nesting
P 11 standard sizes & dimensions
With innovative design and thoughtful engineering, CREW
pairs the familiar form of a classic table with the ease of flip-top
mobility. Experience an elegant mobile solution where every
seat at the table affords maximum comfort. CREW’s innovative
mobile flip-top design places legs at the far corners of the table,
ensuring unconstrained leg room for everyone, regardless
of your configuration. Power and data are smartly integrated
into the table edge, seamlessly and conveniently meeting your
technology needs.
Achieve beautiful, executive-level spaces with total flexibility.
Superior quality, timeless design, smart connectivity,
patented innovation. CREW delivers advanced function in
classic form.

3
www.HALCONfurniture.com
CREW
Magnetic Wire chase accessory
features
quick connect cable manage-
ment easily delivers power
from one table to another
universal table
ganging lever
Available in multiple versions
AC power cord available in
6’ length, Quick disconnect
available in 72”.
table-to-table
power/data distribution
auto floor grip/auto release
universal
table ganging
Integrated Transport Handles

4
www.HALCONfurniture.com
CREW
operation
• Remove all items from the table top.
• Disconnect all cords, including power in-feed and table to table cables.
• Disengage table ganging latches and separate tables.
PRIOR TO FOLDING THE TABLE, PLEASE ENSURE THE FOLLOWING:
step 1
Lift the LH side of the table to release the leg. Swing the leg towards the rear of the table.
step 5
Support the leading edge of the table until it is perpendicular to the floor.
step 4
Continue swinging the leg towards the back of the table.
step 3
Lift the RH side of the table to release the leg. Swing the leg towards the rear of the table.
step 2
Continue swinging the leg towards the back of the table.

5
www.HALCONfurniture.com
CREW
• Tables can be prone to tipping if not moved correctly
PROPER MOVEMENT OF FOLDED TABLES IS REQUIRED
operation
ALWAYS grip transport handles while moving table.
ALWAYS stand on side of table with transport handles while moving.
NEVER stand opposite transport handles while moving.

6
www.HALCONfurniture.com
CREW
grouping
• Example table configurations
• Rotate ganging levers prior to placing in desired position
• Move tables into desired configuration
• Secure ganging latches
• Connect power jumper cables
• Power tables with supplied power cord
Possibility of electric
shock. Never attach
two starter cables per
table run, only use
one starter cable.
WARNING:
rotate the ganging levers at each
corner prior to positioning
power tables
with AC cord
secure ganging
latches
Install power
jumper cables

7
www.HALCONfurniture.com
CREW
table ganging
step 1
Move ganging latches out of stored position prior to positioning. The inside latch must be rotated to full lock.
step 2
Pushing the outside latch will engage the inside latch.
step 3
The latch will be parallel with the outside edge when fully seated
step 4
To disengage the latch, pull the outside latch to release the lock.

8
www.HALCONfurniture.com
CREW
power / data access
Perimeter Power
Quickport Connections
HDMI
CAT. 6 Ethernet
Dual 15 amp simplex
USB-A & USB-C
Blank cover that can be
outfitted with data ports
Blank cover that can be
outfitted with installed HDMI

9
www.HALCONfurniture.com
CREW
power / data access
Double Sided Power & Data Run
Single Sided Power & Data Run

10
www.HALCONfurniture.com
CREW
storage / nesting
10.8"
Nesting Density
Folded Depth (pg. 11) + Nesting Density

11
www.HALCONfurniture.com
CREW
standard sizes & dimensions
standard table sizes
size Leg clearance
inside
leg clearance
end folded height folded width folded depth
A B C D E
30 x 60 52.3 22.3 37. 2 83.4 15.2
30 x 66 58.3 22.3 37. 2 89.4 15.2
30 x 72 64.3 22.3 37. 2 95.4 15.2
33 x 60 52.3 25.3 37. 2 8 7. 6 1 7. 3
33 x 66 58.3 25.3 37. 2 93.6 1 7. 3
33 x 72 64.3 25.3 37. 2 99.6 1 7. 3
36 x 60 52.3 28.3 37. 2 91.8 19.4
36 x 66 58.3 28.3 37. 2 9 7. 8 19.4
36 x 72 64.3 28.3 37. 2 103.8 19.4
weight
Wood top Fenix
lbs kg lbs kg
95.0 43.1 105.8 48.0
100.4 45.5 112.3 50.9
105.8 48.0 118.8 53.9
99.4 45.1 111.4 50.5
105.2 47.7 118.3 53.7
110.9 50.3 125.2 56.8
103.9 47.1 116.9 53.0
109.9 49.8 124.3 56.4
116.0 52.6 131.6 59.7