Halfords Advanced Series User manual

User Instructions
Halfords Advanced Series
Item Code:584083 Halfords Advanced 2 Drawer Cart
Caution:
Read and follow all information in this owners manual before use.
Keep for future reference.
Halfords Ltd. Redditch, B98 0DE.
1

2
SAFETY
SAFETY WARNINGS AND CAUTIONS
To avoid personal injury or product damage in use:
• Do not open more than one drawer at a time, this weight transfer could
cause the unit to fall towards the user.
• Do not stand on the unit or in/on the drawers.
• Always ensure the castor locks are on when stationary.
• Only use this product on an even, level surface to prevent it from
becoming unstable.
• When loading the cart, place heavier items on the bottom of the unit
first then load the drawers/ top.
• Do not exceed the stated maximum weights listed below.
• Ensure that all of the drawers and top lid are fully closed and locked
before moving.
• Always push and not pull the product on the swivel castor side.
• Not suitable for mounting on a truck bed or any other moving objects.
• Ensure fingers etc. are clear of the drawers and lid before closing.
Product Specifications
711mm
444mm
711mm
789mm
879mm 850mm
Drawer Dimension:
Row 1 to 2: 2xW=580mm H=58mm D=377.5mm
Maximum Weight per Drawer (x2): 25KG
Bottom Tray Dimension: 689 (W) x 420 (D) x 80 (H) mm
Maximum Weight per Tray (x2): 50KG
Maximum weight for Top Lid: 40KG

3
OPERATION
1
2
3
4
5
6
7
8
9
(1) ATTACHING UPRIGHT SUPPORTS TO BOTTOM TRAY AND
DRAWER BODY
1. Loosely attach the 4 upright supports (3) to the bottom tray (2) using the M6x10 bolts (7).
2. With a helping hand, slot the drawer body (1) into the uprights, align the holes and
loosely fit the top bolts (7).
3. The handle (4) can be placed into the lower mounting holes either side of the trolley.
Use the longer bolts (8) to install the handle.
4. Fit the remaining bolts to the drawer body, square up the unit and tighten all securely.
1
2
3
4
56
7
8
9

4
(3) REMOVING AND INSTALLING
DRAWERS
(4) LOCKING
Pull the drawer completely out, press down right tab
and lift up left tab, pull drawer off slides.
Close all drawers and top before locking. The drawers are locked closed using the lever
located in the rear of the top tray. If a drawer is not locked, unlock unit and push the
drawer fully closed before re-locking.
Drawer slides and castors should be lubricated periodically. (See Halford’s
lubricant range). Hardware (nuts, bolts, screws) should be tightened periodically
to maintain trouble free operation.
MAINTENANCE
(2) ATTACHING THE CASTORS
1. Ensure the drawers and top tray is locked shut then lay the cart down on its back.
Use the packaging material to protect the paint finish.
2. Mount both swivel castors with brake (6) on the same side of the cart as the handle.
3. Attach each castor using 4 bolts (9) to the bottom tray.
4. Return the cart to its upright position.
WARRANTY
Please visit halfords.com/advanced for information on warranty period and full
terms and conditions.
To reinstall the drawer: Fully extend the runners,
carefully slot the drawer back into the runner and
press into the cabinet. Some resistance is normal
however if a lot is felt, remove and realign.