Hall Technologies HT-SATELLITE-EXT User manual

Hall Technologies December 29, 2022 Page 1 of 9
Hall Technologies • 1234 Lakeshore Dr Suite #150 Coppell, TX 75019 • halltechav.com
HT-SATELLITE-EXT
Add-On Microphone for the Mercury Video Bar
USER MANUAL
December 29, 2022

Hall Technologies December 29, 2022 Page 2 of 9
Table of Contents
Introduction .................................................................................................................................................3
Overview..........................................................................................................................................3
Features............................................................................................................................................3
Package Contents.............................................................................................................................3
Panel Description .........................................................................................................................................4
Installation....................................................................................................................................................5
Application ...................................................................................................................................................5
Standard Connection Diagram.........................................................................................................5
Full Application Setup Diagram........................................................................................................6
API Command List ........................................................................................................................................7
Troubleshooting ...........................................................................................................................................8
Specifications ...............................................................................................................................................9

Hall Technologies December 29, 2022 Page 3 of 9
Introduction
OVERVIEW
This product is an add-on microphone for Video Bar to extend pickup distance. It is ideal for applications
at huddle/small/ medium rooms.
FEATURES
•4 x MEMS omnidirectional microphone arrays with a range of 3 ~ 5 meters.
•Supports AEC (Acoustic Echo Cancellation), AGC (Automatic Gain Control), ANS (Automatic Noise
Suppression) and full duplex communication, making all participants feel like they are talking face-
to-face.
•Cascade up to three times for extending pickup range.
•Mic mute button with LED feedback.
•Able to work with VB10-000 for audio signal extension over Ethernet.
PACKAGE CONTENTS
•1 x Microphone
•1 x 7m USB-Mini Cable

Hall Technologies December 29, 2022 Page 4 of 9
Panel Description
ID
Name
Description
1
4 x Mute/Unmute buttons.
Press any of these buttons to mute or unmute all microphones, including the one at the Video
Bar and all other MIC10-000 units.
2
Status LED
4 x LEDs that next to the buttons lighting white: The microphone is working properly.
4 x LEDs that next to the buttons blinking white: The microphone is being upgraded.
3 x LEDs in the sound source direction lighting blue: The microphone is picking up sound.
(Once the microphone completes pickup, the lighting LEDs will be off.)
All LEDs lighting red: The microphone is muted.
3
Microphone
4 x omnidirectional microphone arrays for picking up sound.
4
UP
Connect to the video bar or the upper level microphone. This port supports power input.
5
DOWN
Connect to the other extensible microphone. This port supports power output

Hall Technologies December 29, 2022 Page 5 of 9
Installation
INSTALLATION
Note: Before installation, please ensure the device is disconnected from the power source.
The device can be placed on the desk or be installed on a tripod.
To install the device on the wall:
1. Screw the tripod’s clip into the 1/4 (British
standard) thread hole at the device’s
bottom.
2. Secure the device along with the clip on the
tripod, adjust them to a position and height
you desire.
Application
STANDARD CONNECTION DIAGRAM

Hall Technologies December 29, 2022 Page 6 of 9
FULL APPLICATION SETUP DIAGRAM Showing HT-MERCURY Video Bar connections and applications, HT-VOYAGER BYOD Dongle usage depicted

Hall Technologies December 29, 2022 Page 7 of 9
API Commands
Additional commands not found in the Web GUI such as AEC enable/disable, AGC enable/disable, ANC
enable/disable, and others can be found in the HT-MERCURY API Commands document.

Hall Technologies December 29, 2022 Page 8 of 9
Troubleshooting
Used in connection with HT-MERCURY Video Bar
Problem Type
Problem
Options
USB
USB-C not connecting
Verify connected cable supports USB-C
The response time to output video of USB 3.0 and Type-C is typically 6-8
seconds, although the response time between PC’s can differ
Confirm the PC can transmit video over USB-C by installing the
DisplayLink device driver: https://www.displaylink.com/downloads
PC charge reminder
pop-up
This pop-up is normal since the HT-MERCURY charging power might be
different than what the laptop requires
To ensure the laptop doesn’t lose power, connect a dedicated power
supply
Audio
No audio at far end on
soft codec call (i.e.
Meet, Teams, Zoom,
etc.)
Verify the HT-MERCURY microphone is not muted (red LED means
muted)
Verify the microphone selected in the soft codec is the HT-MERCURY
Verify the soft codec microphone is not muted
No audio heard on HT-
MERCURY
Verify the HT-MERCURY is selected as the desired speaker output in the
laptop by clicking on the speaker icon to open the audio output
Verify the HT-MERCURY is not muted
Verify the levels are turned up on both the laptop and the HT-MERCURY

Hall Technologies December 29, 2022 Page 9 of 9
Specifications
Audio and Video
Input / Output
Mini USB
Microphone
Microphone
4 x Omnidirectional microphone arrays; Pick-up Range: 3~5m
Communication and Control
USB
Mini USB
General
Operating Temperature
0°C ~ 40°C (32°F to 104°F)
Storage Temperature
-20°C ~ 60°C (-4°F to 140°F)
Humidity
10% to 90%, non-condensing
Power Supply
Powered by Video Bar
Power Consumption
1.5W (Max)
Dimension (φ x h)
123mm x 36mm/4.84” x 1.42”
Net Weight
0.29kg/0.638lb
© Copyright 2022. Hall Technologies
All rights reserved.
1234 Lakeshore Drive, Suite #150, Coppell, TX 75019
halltechav.com / [email protected]
[phone]