Halo Wireless Hub User manual

WIRELESS HUB
PLEASE READ BEFORE OPERATING THIS EQUIPMENT

POWER YOUR LIFE | 2
HALO WIRELESS HUB
Thank you for choosing the HALO WIRELESS HUB. Innovative
and easy to use, the HALO WIRELESS HUB provides a
powerful and universal charging source for both wireless
and non-wireless devices.
Please read the operating instructions carefully before using
the HALO WIRELESS HUB.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put ngers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of re
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
• Do not use the product that is damaged or modied.
Damaged or modied product may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualied
service person when service or repair is required. Incorrect
reassembly may result in a risk of re or injury to persons.
• Do not expose a product to re or excessive
temperature. Exposure to re or temperature above
70°C/158°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, re or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you nd that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO WIRELESS HUB
- AC Adapter
- USB-A to Micro USB Cable
- USB-C to USB-C Cable
1 | Wireless Charging
2 | Ring Light
3 | DC Input Port
4 | USB-A Output Port 1
5 | USB-C Output Port
6 | USB-A Output Port 2
7 | Non-slip Feet
OPERATING INSTRUCTIONS
POWERING YOUR HALO WIRELESS HUB
The HALO WIRELESS HUB can be powered using the AC
Adapter. Connect the supplied AC wall adapter to the
charging base and to the wall outlet.
Place the wireless device on the HALO WIRELESS HUB as
shown in the illustration below. Make sure the center of the
device is aligned over the center of the charging base.
Charging will begin on contact.
HALO WIRELESS HUB RING LIGHT
• When the HALO WIRELESS HUB is powered on, the Ring
Light will illuminate for 5 seconds.
• While charging, the Ring Light illuminates for 15 seconds,
then turns o.
• When a foreign object is detected or if there is an error, the
Ring Light will ash and the Wireless Output will turn o.
CHARGING YOUR PERSONAL ELECTRONIC DEVICE
Use the appropriate charging cable that came with the
HALO WIRELESS HUB to charge your electronic device. You
can charge up to four devices simultaneously. Once your
electronic device is connected, charging will begin
automatically.
NOTE:
You may also use the USB cable that was supplied with your
electronic device.
SPECIFICATIONS
DC Input: 15V/4A
WPC output: 10W Max
TYPE-C output: 5V/3A 9V/2A 12V/1.5A(PD18W)
USB-A Output 1: 5V/2.4
USB-A Output 2: A5V/3A 9V/2A 12V/1.5A(QC18W)
USB-A1+USB-A2 outout: 15W MAX
Dimensions (L x W x H): 3.78 X 0.87 inches
HALO WIRELESS HUB Weight: 0.2 lbs
AC Adapter Weight: 0.4 lbs
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: 68°F - 158°F (20°C - 70°C)
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced technician
for help.
• Any changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certied peripherals and shielded cables.
All peripherals must be shielded and grounded. Operation
with non-certied peripherals or non-shielded cables may
result in interference to radio or reception.
MODIFICATION: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may
suer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory
other than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suer as a result of
misuse of this product as outlined above. Purchaser agrees
to defend, indemnify, and hold Manufacturer harmless for
any claims or damages arising from unintended use or
misuse, including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal
use. During the rst 90 days from date of purchase, HALO
will repair or replace the defective product.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and tness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or
losses of or to electronic equipment or products that are
used with any of HALO’s products.

3 | POWER YOUR LIFE
HALO WIRELESS HUB
Thank you for choosing the HALO WIRELESS HUB. Innovative
and easy to use, the HALO WIRELESS HUB provides a
powerful and universal charging source for both wireless
and non-wireless devices.
Please read the operating instructions carefully before using
the HALO WIRELESS HUB.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put ngers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of re
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
• Do not use the product that is damaged or modied.
Damaged or modied product may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualied
service person when service or repair is required. Incorrect
reassembly may result in a risk of re or injury to persons.
• Do not expose a product to re or excessive
temperature. Exposure to re or temperature above
70°C/158°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, re or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you nd that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO WIRELESS HUB
- AC Adapter
- USB-A to Micro USB Cable
- USB-C to USB-C Cable
1 | Wireless Charging
2 | Ring Light
3 | DC Input Port
4 | USB-A Output Port 1
5 | USB-C Output Port
6 | USB-A Output Port 2
7 | Non-slip Feet
OPERATING INSTRUCTIONS
POWERING YOUR HALO WIRELESS HUB
The HALO WIRELESS HUB can be powered using the AC
Adapter. Connect the supplied AC wall adapter to the
charging base and to the wall outlet.
Place the wireless device on the HALO WIRELESS HUB as
shown in the illustration below. Make sure the center of the
device is aligned over the center of the charging base.
Charging will begin on contact.
HALO WIRELESS HUB RING LIGHT
• When the HALO WIRELESS HUB is powered on, the Ring
Light will illuminate for 5 seconds.
• While charging, the Ring Light illuminates for 15 seconds,
then turns o.
• When a foreign object is detected or if there is an error, the
Ring Light will ash and the Wireless Output will turn o.
CHARGING YOUR PERSONAL ELECTRONIC DEVICE
Use the appropriate charging cable that came with the
HALO WIRELESS HUB to charge your electronic device. You
can charge up to four devices simultaneously. Once your
electronic device is connected, charging will begin
automatically.
NOTE:
You may also use the USB cable that was supplied with your
electronic device.
SPECIFICATIONS
DC Input: 15V/4A
WPC output: 10W Max
TYPE-C output: 5V/3A 9V/2A 12V/1.5A(PD18W)
USB-A Output 1: 5V/2.4
USB-A Output 2: A5V/3A 9V/2A 12V/1.5A(QC18W)
USB-A1+USB-A2 outout: 15W MAX
Dimensions (L x W x H): 3.78 X 0.87 inches
HALO WIRELESS HUB Weight: 0.2 lbs
AC Adapter Weight: 0.4 lbs
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: 68°F - 158°F (20°C - 70°C)
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced technician
for help.
• Any changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certied peripherals and shielded cables.
All peripherals must be shielded and grounded. Operation
with non-certied peripherals or non-shielded cables may
result in interference to radio or reception.
MODIFICATION: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may
suer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory
other than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suer as a result of
misuse of this product as outlined above. Purchaser agrees
to defend, indemnify, and hold Manufacturer harmless for
any claims or damages arising from unintended use or
misuse, including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal
use. During the rst 90 days from date of purchase, HALO
will repair or replace the defective product.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and tness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or
losses of or to electronic equipment or products that are
used with any of HALO’s products.

HALO WIRELESS HUB
Thank you for choosing the HALO WIRELESS HUB. Innovative
and easy to use, the HALO WIRELESS HUB provides a
powerful and universal charging source for both wireless
and non-wireless devices.
Please read the operating instructions carefully before using
the HALO WIRELESS HUB.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put ngers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of re
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
• Do not use the product that is damaged or modied.
Damaged or modied product may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualied
service person when service or repair is required. Incorrect
reassembly may result in a risk of re or injury to persons.
• Do not expose a product to re or excessive
temperature. Exposure to re or temperature above
70°C/158°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, re or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you nd that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
POWER YOUR LIFE | 4
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO WIRELESS HUB
- AC Adapter
- USB-A to Micro USB Cable
- USB-C to USB-C Cable
1 | Wireless Charging
2 | Ring Light
3 | DC Input Port
4 | USB-A Output Port 1
5 | USB-C Output Port
6 | USB-A Output Port 2
7 | Non-slip Feet
OPERATING INSTRUCTIONS
POWERING YOUR HALO WIRELESS HUB
The HALO WIRELESS HUB can be powered using the AC
Adapter. Connect the supplied AC wall adapter to the
charging base and to the wall outlet.
Place the wireless device on the HALO WIRELESS HUB as
shown in the illustration below. Make sure the center of the
device is aligned over the center of the charging base.
Charging will begin on contact.
HALO WIRELESS HUB RING LIGHT
• When the HALO WIRELESS HUB is powered on, the Ring
Light will illuminate for 5 seconds.
• While charging, the Ring Light illuminates for 15 seconds,
then turns o.
• When a foreign object is detected or if there is an error, the
Ring Light will ash and the Wireless Output will turn o.
CHARGING YOUR PERSONAL ELECTRONIC DEVICE
Use the appropriate charging cable that came with the
HALO WIRELESS HUB to charge your electronic device. You
can charge up to four devices simultaneously. Once your
electronic device is connected, charging will begin
automatically.
NOTE:
You may also use the USB cable that was supplied with your
electronic device.
SPECIFICATIONS
DC Input: 15V/4A
WPC output: 10W Max
TYPE-C output: 5V/3A 9V/2A 12V/1.5A(PD18W)
USB-A Output 1: 5V/2.4
USB-A Output 2: A5V/3A 9V/2A 12V/1.5A(QC18W)
USB-A1+USB-A2 outout: 15W MAX
Dimensions (L x W x H): 3.78 X 0.87 inches
HALO WIRELESS HUB Weight: 0.2 lbs
AC Adapter Weight: 0.4 lbs
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: 68°F - 158°F (20°C - 70°C)
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced technician
for help.
• Any changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certied peripherals and shielded cables.
All peripherals must be shielded and grounded. Operation
with non-certied peripherals or non-shielded cables may
result in interference to radio or reception.
MODIFICATION: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may
suer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory
other than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suer as a result of
misuse of this product as outlined above. Purchaser agrees
to defend, indemnify, and hold Manufacturer harmless for
any claims or damages arising from unintended use or
misuse, including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal
use. During the rst 90 days from date of purchase, HALO
will repair or replace the defective product.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and tness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or
losses of or to electronic equipment or products that are
used with any of HALO’s products.

HALO WIRELESS HUB
Thank you for choosing the HALO WIRELESS HUB. Innovative
and easy to use, the HALO WIRELESS HUB provides a
powerful and universal charging source for both wireless
and non-wireless devices.
Please read the operating instructions carefully before using
the HALO WIRELESS HUB.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put ngers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of re
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
• Do not use the product that is damaged or modied.
Damaged or modied product may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualied
service person when service or repair is required. Incorrect
reassembly may result in a risk of re or injury to persons.
• Do not expose a product to re or excessive
temperature. Exposure to re or temperature above
70°C/158°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, re or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you nd that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
5 | POWER YOUR LIFE
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO WIRELESS HUB
- AC Adapter
- USB-A to Micro USB Cable
- USB-C to USB-C Cable
1 | Wireless Charging
2 | Ring Light
3 | DC Input Port
4 | USB-A Output Port 1
5 | USB-C Output Port
6 | USB-A Output Port 2
7 | Non-slip Feet
OPERATING INSTRUCTIONS
POWERING YOUR HALO WIRELESS HUB
The HALO WIRELESS HUB can be powered using the AC
Adapter. Connect the supplied AC wall adapter to the
charging base and to the wall outlet.
Place the wireless device on the HALO WIRELESS HUB as
shown in the illustration below. Make sure the center of the
device is aligned over the center of the charging base.
Charging will begin on contact.
HALO WIRELESS HUB RING LIGHT
• When the HALO WIRELESS HUB is powered on, the Ring
Light will illuminate for 5 seconds.
• While charging, the Ring Light illuminates for 15 seconds,
then turns o.
• When a foreign object is detected or if there is an error, the
Ring Light will ash and the Wireless Output will turn o.
CHARGING YOUR PERSONAL ELECTRONIC DEVICE
Use the appropriate charging cable that came with the
HALO WIRELESS HUB to charge your electronic device. You
can charge up to four devices simultaneously. Once your
electronic device is connected, charging will begin
automatically.
NOTE:
You may also use the USB cable that was supplied with your
electronic device.
SPECIFICATIONS
DC Input: 15V/4A
WPC output: 10W Max
TYPE-C output: 5V/3A 9V/2A 12V/1.5A(PD18W)
USB-A Output 1: 5V/2.4
USB-A Output 2: A5V/3A 9V/2A 12V/1.5A(QC18W)
USB-A1+USB-A2 outout: 15W MAX
Dimensions (L x W x H): 3.78 X 0.87 inches
HALO WIRELESS HUB Weight: 0.2 lbs
AC Adapter Weight: 0.4 lbs
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: 68°F - 158°F (20°C - 70°C)
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced technician
for help.
• Any changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certied peripherals and shielded cables.
All peripherals must be shielded and grounded. Operation
with non-certied peripherals or non-shielded cables may
result in interference to radio or reception.
MODIFICATION: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may
suer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory
other than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suer as a result of
misuse of this product as outlined above. Purchaser agrees
to defend, indemnify, and hold Manufacturer harmless for
any claims or damages arising from unintended use or
misuse, including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal
use. During the rst 90 days from date of purchase, HALO
will repair or replace the defective product.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and tness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or
losses of or to electronic equipment or products that are
used with any of HALO’s products.

HALO WIRELESS HUB
Thank you for choosing the HALO WIRELESS HUB. Innovative
and easy to use, the HALO WIRELESS HUB provides a
powerful and universal charging source for both wireless
and non-wireless devices.
Please read the operating instructions carefully before using
the HALO WIRELESS HUB.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put ngers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of re
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
• Do not use the product that is damaged or modied.
Damaged or modied product may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualied
service person when service or repair is required. Incorrect
reassembly may result in a risk of re or injury to persons.
• Do not expose a product to re or excessive
temperature. Exposure to re or temperature above
70°C/158°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, re or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you nd that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO WIRELESS HUB
- AC Adapter
- USB-A to Micro USB Cable
- USB-C to USB-C Cable
1 | Wireless Charging
2 | Ring Light
3 | DC Input Port
4 | USB-A Output Port 1
5 | USB-C Output Port
6 | USB-A Output Port 2
7 | Non-slip Feet
OPERATING INSTRUCTIONS
POWERING YOUR HALO WIRELESS HUB
The HALO WIRELESS HUB can be powered using the AC
Adapter. Connect the supplied AC wall adapter to the
charging base and to the wall outlet.
Place the wireless device on the HALO WIRELESS HUB as
shown in the illustration below. Make sure the center of the
device is aligned over the center of the charging base.
Charging will begin on contact.
HALO WIRELESS HUB RING LIGHT
• When the HALO WIRELESS HUB is powered on, the Ring
Light will illuminate for 5 seconds.
• While charging, the Ring Light illuminates for 15 seconds,
then turns o.
• When a foreign object is detected or if there is an error, the
Ring Light will ash and the Wireless Output will turn o.
CHARGING YOUR PERSONAL ELECTRONIC DEVICE
Use the appropriate charging cable that came with the
HALO WIRELESS HUB to charge your electronic device. You
can charge up to four devices simultaneously. Once your
electronic device is connected, charging will begin
automatically.
NOTE:
You may also use the USB cable that was supplied with your
electronic device.
SPECIFICATIONS
DC Input: 15V/4A
WPC output: 10W Max
TYPE-C output: 5V/3A 9V/2A 12V/1.5A(PD18W)
USB-A Output 1: 5V/2.4
USB-A Output 2: A5V/3A 9V/2A 12V/1.5A(QC18W)
USB-A1+USB-A2 outout: 15W MAX
Dimensions (L x W x H): 3.78 X 0.87 inches
HALO WIRELESS HUB Weight: 0.2 lbs
AC Adapter Weight: 0.4 lbs
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: 68°F - 158°F (20°C - 70°C)
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced technician
for help.
• Any changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certied peripherals and shielded cables.
All peripherals must be shielded and grounded. Operation
with non-certied peripherals or non-shielded cables may
result in interference to radio or reception.
MODIFICATION: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may
suer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory
other than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suer as a result of
misuse of this product as outlined above. Purchaser agrees
to defend, indemnify, and hold Manufacturer harmless for
any claims or damages arising from unintended use or
misuse, including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal
use. During the rst 90 days from date of purchase, HALO
will repair or replace the defective product.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and tness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or
losses of or to electronic equipment or products that are
used with any of HALO’s products.
POWER YOUR LIFE | 6
4-5
7
8-9
9
11

HALO WIRELESS HUB
Thank you for choosing the HALO WIRELESS HUB. Innovative
and easy to use, the HALO WIRELESS HUB provides a
powerful and universal charging source for both wireless
and non-wireless devices.
Please read the operating instructions carefully before using
the HALO WIRELESS HUB.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put ngers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of re
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
• Do not use the product that is damaged or modied.
Damaged or modied product may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualied
service person when service or repair is required. Incorrect
reassembly may result in a risk of re or injury to persons.
• Do not expose a product to re or excessive
temperature. Exposure to re or temperature above
70°C/158°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, re or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you nd that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO WIRELESS HUB
- AC Adapter
- USB-A to Micro USB Cable
- USB-C to USB-C Cable
1 | Wireless Charging
2 | Ring Light
3 | DC Input Port
4 | USB-A Output Port 1
5 | USB-C Output Port
6 | USB-A Output Port 2
7 | Non-slip Feet
12
4567
3
OPERATING INSTRUCTIONS
POWERING YOUR HALO WIRELESS HUB
The HALO WIRELESS HUB can be powered using the AC
Adapter. Connect the supplied AC wall adapter to the
charging base and to the wall outlet.
Place the wireless device on the HALO WIRELESS HUB as
shown in the illustration below. Make sure the center of the
device is aligned over the center of the charging base.
Charging will begin on contact.
HALO WIRELESS HUB RING LIGHT
• When the HALO WIRELESS HUB is powered on, the Ring
Light will illuminate for 5 seconds.
• While charging, the Ring Light illuminates for 15 seconds,
then turns o.
• When a foreign object is detected or if there is an error, the
Ring Light will ash and the Wireless Output will turn o.
CHARGING YOUR PERSONAL ELECTRONIC DEVICE
Use the appropriate charging cable that came with the
HALO WIRELESS HUB to charge your electronic device. You
can charge up to four devices simultaneously. Once your
electronic device is connected, charging will begin
automatically.
NOTE:
You may also use the USB cable that was supplied with your
electronic device.
SPECIFICATIONS
DC Input: 15V/4A
WPC output: 10W Max
TYPE-C output: 5V/3A 9V/2A 12V/1.5A(PD18W)
USB-A Output 1: 5V/2.4
USB-A Output 2: A5V/3A 9V/2A 12V/1.5A(QC18W)
USB-A1+USB-A2 outout: 15W MAX
Dimensions (L x W x H): 3.78 X 0.87 inches
HALO WIRELESS HUB Weight: 0.2 lbs
AC Adapter Weight: 0.4 lbs
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: 68°F - 158°F (20°C - 70°C)
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced technician
for help.
• Any changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certied peripherals and shielded cables.
All peripherals must be shielded and grounded. Operation
with non-certied peripherals or non-shielded cables may
result in interference to radio or reception.
MODIFICATION: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may
suer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory
other than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suer as a result of
misuse of this product as outlined above. Purchaser agrees
to defend, indemnify, and hold Manufacturer harmless for
any claims or damages arising from unintended use or
misuse, including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal
use. During the rst 90 days from date of purchase, HALO
will repair or replace the defective product.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and tness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or
losses of or to electronic equipment or products that are
used with any of HALO’s products.
7 | POWER YOUR LIFE

HALO WIRELESS HUB
Thank you for choosing the HALO WIRELESS HUB. Innovative
and easy to use, the HALO WIRELESS HUB provides a
powerful and universal charging source for both wireless
and non-wireless devices.
Please read the operating instructions carefully before using
the HALO WIRELESS HUB.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put ngers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of re
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
• Do not use the product that is damaged or modied.
Damaged or modied product may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualied
service person when service or repair is required. Incorrect
reassembly may result in a risk of re or injury to persons.
• Do not expose a product to re or excessive
temperature. Exposure to re or temperature above
70°C/158°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, re or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you nd that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO WIRELESS HUB
- AC Adapter
- USB-A to Micro USB Cable
- USB-C to USB-C Cable
1 | Wireless Charging
2 | Ring Light
3 | DC Input Port
4 | USB-A Output Port 1
5 | USB-C Output Port
6 | USB-A Output Port 2
7 | Non-slip Feet
OPERATING INSTRUCTIONS
POWERING YOUR HALO WIRELESS HUB
The HALO WIRELESS HUB can be powered using the AC
Adapter. Connect the supplied AC wall adapter to the
charging base and to the wall outlet.
Place the wireless device on the HALO WIRELESS HUB as
shown in the illustration below. Make sure the center of the
device is aligned over the center of the charging base.
Charging will begin on contact.
HALO WIRELESS HUB RING LIGHT
• When the HALO WIRELESS HUB is powered on, the Ring
Light will illuminate for 5 seconds.
• While charging, the Ring Light illuminates for 15 seconds,
then turns o.
• When a foreign object is detected or if there is an error, the
Ring Light will ash and the Wireless Output will turn o.
CHARGING YOUR PERSONAL ELECTRONIC DEVICE
Use the appropriate charging cable that came with the
HALO WIRELESS HUB to charge your electronic device. You
can charge up to four devices simultaneously. Once your
electronic device is connected, charging will begin
automatically.
NOTE:
You may also use the USB cable that was supplied with your
electronic device.
SPECIFICATIONS
DC Input: 15V/4A
WPC output: 10W Max
TYPE-C output: 5V/3A 9V/2A 12V/1.5A(PD18W)
USB-A Output 1: 5V/2.4
USB-A Output 2: A5V/3A 9V/2A 12V/1.5A(QC18W)
USB-A1+USB-A2 outout: 15W MAX
Dimensions (L x W x H): 3.78 X 0.87 inches
HALO WIRELESS HUB Weight: 0.2 lbs
AC Adapter Weight: 0.4 lbs
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: 68°F - 158°F (20°C - 70°C)
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced technician
for help.
• Any changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certied peripherals and shielded cables.
All peripherals must be shielded and grounded. Operation
with non-certied peripherals or non-shielded cables may
result in interference to radio or reception.
MODIFICATION: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may
suer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory
other than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suer as a result of
misuse of this product as outlined above. Purchaser agrees
to defend, indemnify, and hold Manufacturer harmless for
any claims or damages arising from unintended use or
misuse, including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal
use. During the rst 90 days from date of purchase, HALO
will repair or replace the defective product.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and tness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or
losses of or to electronic equipment or products that are
used with any of HALO’s products.
POWER YOUR LIFE | 8

HALO WIRELESS HUB
Thank you for choosing the HALO WIRELESS HUB. Innovative
and easy to use, the HALO WIRELESS HUB provides a
powerful and universal charging source for both wireless
and non-wireless devices.
Please read the operating instructions carefully before using
the HALO WIRELESS HUB.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put ngers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of re
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
• Do not use the product that is damaged or modied.
Damaged or modied product may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualied
service person when service or repair is required. Incorrect
reassembly may result in a risk of re or injury to persons.
• Do not expose a product to re or excessive
temperature. Exposure to re or temperature above
70°C/158°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, re or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you nd that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO WIRELESS HUB
- AC Adapter
- USB-A to Micro USB Cable
- USB-C to USB-C Cable
1 | Wireless Charging
2 | Ring Light
3 | DC Input Port
4 | USB-A Output Port 1
5 | USB-C Output Port
6 | USB-A Output Port 2
7 | Non-slip Feet
OPERATING INSTRUCTIONS
POWERING YOUR HALO WIRELESS HUB
The HALO WIRELESS HUB can be powered using the AC
Adapter. Connect the supplied AC wall adapter to the
charging base and to the wall outlet.
Place the wireless device on the HALO WIRELESS HUB as
shown in the illustration below. Make sure the center of the
device is aligned over the center of the charging base.
Charging will begin on contact.
HALO WIRELESS HUB RING LIGHT
• When the HALO WIRELESS HUB is powered on, the Ring
Light will illuminate for 5 seconds.
• While charging, the Ring Light illuminates for 15 seconds,
then turns o.
• When a foreign object is detected or if there is an error, the
Ring Light will ash and the Wireless Output will turn o.
CHARGING YOUR PERSONAL ELECTRONIC DEVICE
Use the appropriate charging cable that came with the
HALO WIRELESS HUB to charge your electronic device. You
can charge up to four devices simultaneously. Once your
electronic device is connected, charging will begin
automatically.
NOTE:
You may also use the USB cable that was supplied with your
electronic device.
SPECIFICATIONS
DC Input: 15V/4A
WPC output: 10W Max
TYPE-C output: 5V/3A 9V/2A 12V/1.5A(PD18W)
USB-A Output 1: 5V/2.4
USB-A Output 2: A5V/3A 9V/2A 12V/1.5A(QC18W)
USB-A1+USB-A2 outout: 15W MAX
Dimensions (L x W x H): 3.78 X 0.87 inches
HALO WIRELESS HUB Weight: 0.2 lbs
AC Adapter Weight: 0.4 lbs
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: 68°F - 158°F (20°C - 70°C)
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced technician
for help.
• Any changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certied peripherals and shielded cables.
All peripherals must be shielded and grounded. Operation
with non-certied peripherals or non-shielded cables may
result in interference to radio or reception.
MODIFICATION: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may
suer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory
other than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suer as a result of
misuse of this product as outlined above. Purchaser agrees
to defend, indemnify, and hold Manufacturer harmless for
any claims or damages arising from unintended use or
misuse, including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal
use. During the rst 90 days from date of purchase, HALO
will repair or replace the defective product.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and tness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or
losses of or to electronic equipment or products that are
used with any of HALO’s products.
9 | POWER YOUR LIFE

HALO WIRELESS HUB
Thank you for choosing the HALO WIRELESS HUB. Innovative
and easy to use, the HALO WIRELESS HUB provides a
powerful and universal charging source for both wireless
and non-wireless devices.
Please read the operating instructions carefully before using
the HALO WIRELESS HUB.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put ngers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of re
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
• Do not use the product that is damaged or modied.
Damaged or modied product may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualied
service person when service or repair is required. Incorrect
reassembly may result in a risk of re or injury to persons.
• Do not expose a product to re or excessive
temperature. Exposure to re or temperature above
70°C/158°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, re or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you nd that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO WIRELESS HUB
- AC Adapter
- USB-A to Micro USB Cable
- USB-C to USB-C Cable
1 | Wireless Charging
2 | Ring Light
3 | DC Input Port
4 | USB-A Output Port 1
5 | USB-C Output Port
6 | USB-A Output Port 2
7 | Non-slip Feet
OPERATING INSTRUCTIONS
POWERING YOUR HALO WIRELESS HUB
The HALO WIRELESS HUB can be powered using the AC
Adapter. Connect the supplied AC wall adapter to the
charging base and to the wall outlet.
Place the wireless device on the HALO WIRELESS HUB as
shown in the illustration below. Make sure the center of the
device is aligned over the center of the charging base.
Charging will begin on contact.
HALO WIRELESS HUB RING LIGHT
• When the HALO WIRELESS HUB is powered on, the Ring
Light will illuminate for 5 seconds.
• While charging, the Ring Light illuminates for 15 seconds,
then turns o.
• When a foreign object is detected or if there is an error, the
Ring Light will ash and the Wireless Output will turn o.
CHARGING YOUR PERSONAL ELECTRONIC DEVICE
Use the appropriate charging cable that came with the
HALO WIRELESS HUB to charge your electronic device. You
can charge up to four devices simultaneously. Once your
electronic device is connected, charging will begin
automatically.
NOTE:
You may also use the USB cable that was supplied with your
electronic device.
SPECIFICATIONS
DC Input: 15V/4A
WPC output: 10W Max
TYPE-C output: 5V/3A 9V/2A 12V/1.5A(PD18W)
USB-A Output 1: 5V/2.4
USB-A Output 2: A5V/3A 9V/2A 12V/1.5A(QC18W)
USB-A1+USB-A2 outout: 15W MAX
Dimensions (L x W x H): 3.78 X 0.87 inches
HALO WIRELESS HUB Weight: 0.2 lbs
AC Adapter Weight: 0.4 lbs
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: 68°F - 158°F (20°C - 70°C)
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced technician
for help.
• Any changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certied peripherals and shielded cables.
All peripherals must be shielded and grounded. Operation
with non-certied peripherals or non-shielded cables may
result in interference to radio or reception.
MODIFICATION: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may
suer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory
other than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suer as a result of
misuse of this product as outlined above. Purchaser agrees
to defend, indemnify, and hold Manufacturer harmless for
any claims or damages arising from unintended use or
misuse, including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal
use. During the rst 90 days from date of purchase, HALO
will repair or replace the defective product.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and tness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or
losses of or to electronic equipment or products that are
used with any of HALO’s products.
POWER YOUR LIFE | 10

HALO WIRELESS HUB
Thank you for choosing the HALO WIRELESS HUB. Innovative
and easy to use, the HALO WIRELESS HUB provides a
powerful and universal charging source for both wireless
and non-wireless devices.
Please read the operating instructions carefully before using
the HALO WIRELESS HUB.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put ngers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of re
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of re or
injury to persons.
• Do not use the product that is damaged or modied.
Damaged or modied product may exhibit unpredictable
behavior resulting in re, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualied
service person when service or repair is required. Incorrect
reassembly may result in a risk of re or injury to persons.
• Do not expose a product to re or excessive
temperature. Exposure to re or temperature above
70°C/158°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, re or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you nd that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO WIRELESS HUB
- AC Adapter
- USB-A to Micro USB Cable
- USB-C to USB-C Cable
1 | Wireless Charging
2 | Ring Light
3 | DC Input Port
4 | USB-A Output Port 1
5 | USB-C Output Port
6 | USB-A Output Port 2
7 | Non-slip Feet
OPERATING INSTRUCTIONS
POWERING YOUR HALO WIRELESS HUB
The HALO WIRELESS HUB can be powered using the AC
Adapter. Connect the supplied AC wall adapter to the
charging base and to the wall outlet.
Place the wireless device on the HALO WIRELESS HUB as
shown in the illustration below. Make sure the center of the
device is aligned over the center of the charging base.
Charging will begin on contact.
HALO WIRELESS HUB RING LIGHT
• When the HALO WIRELESS HUB is powered on, the Ring
Light will illuminate for 5 seconds.
• While charging, the Ring Light illuminates for 15 seconds,
then turns o.
• When a foreign object is detected or if there is an error, the
Ring Light will ash and the Wireless Output will turn o.
CHARGING YOUR PERSONAL ELECTRONIC DEVICE
Use the appropriate charging cable that came with the
HALO WIRELESS HUB to charge your electronic device. You
can charge up to four devices simultaneously. Once your
electronic device is connected, charging will begin
automatically.
NOTE:
You may also use the USB cable that was supplied with your
electronic device.
SPECIFICATIONS
DC Input: 15V/4A
WPC output: 10W Max
TYPE-C output: 5V/3A 9V/2A 12V/1.5A(PD18W)
USB-A Output 1: 5V/2.4
USB-A Output 2: A5V/3A 9V/2A 12V/1.5A(QC18W)
USB-A1+USB-A2 outout: 15W MAX
Dimensions (L x W x H): 3.78 X 0.87 inches
HALO WIRELESS HUB Weight: 0.2 lbs
AC Adapter Weight: 0.4 lbs
Operating Temperature: 32°F - 104°F (0°C - 40°C)
Storage Temperature: 68°F - 158°F (20°C - 70°C)
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced technician
for help.
• Any changes or modications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certied peripherals and shielded cables.
All peripherals must be shielded and grounded. Operation
with non-certied peripherals or non-shielded cables may
result in interference to radio or reception.
MODIFICATION: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may
suer as a result of use, intended or unintended, or misuse
of this product in conjunction with any device or accessory
other than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suer as a result of
misuse of this product as outlined above. Purchaser agrees
to defend, indemnify, and hold Manufacturer harmless for
any claims or damages arising from unintended use or
misuse, including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal
use. During the rst 90 days from date of purchase, HALO
will repair or replace the defective product.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and tness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or
losses of or to electronic equipment or products that are
used with any of HALO’s products.
11 | POWER YOUR LIFE

FOR TECHNICAL SUPPORT PLEASE
CONTACT US AT:
ZAGG.COM/SUPPORT
OR
CALL US AT: 888-907-6274
HALO
910 W LEGACY CENTER WAY
STE. 500, MIDVALE, UTAH 84047
WWW.ZAGG.COM/HALO
©2020 ZAGG Inc | www.ZAGG.com/HALO
The HALO and H trademarks are the property of ZAGG Inc.
USB-C is a registered trademark of the USB Implementer's Forum.
Lightning is a trademark of Apple Inc., registered in the U.S. and other countries.
All rights reserved.
314-00857-A
ZAGG Inc | 910 W Legacy Center Way,
Ste. 500, Midvale, Utah 84047
Made in China.