Halo Lite RF User manual

i
d
e
a
l
h
e
a
t
i
n
g
.
c
o
m
H
a
l
o
L
i
t
e
R
F
U
s
e
r
G
u
i
d
e

2
The code of practice for the installation, commissioning
& servicing of central heating systems
CONTENTS
1. Welcome.............................................................................................................................................................3
2. Using Your Halo Lite RF ....................................................................................................................... 4
3. Main Features.................................................................................................................................................5
3.1 Mode Selection...............................................................................................................................5
3.2 Override.................................................................................................................................................6
3.3 Manual Override............................................................................................................................6
3.4 Plus Hours...........................................................................................................................................7
3.5 Schedules ............................................................................................................................................8
4. Additional Features...................................................................................................................................9
5. Symbols..............................................................................................................................................................10
6. Warranty.............................................................................................................................................................11

3
1. WELCOME
Welcome to your new Ideal Halo control. This
thermostat will help you to control both your heating
temperature and the times that your heating is on.
Halo Lite RF is a battery powered, wireless control,
that communicates on an 868MHz frequency to
a wired receiver located near to your boiler or heat
pump control box.
This user guide is applicable to the Halo Lite RF
control only.
Halo Lite RF is a non-connected control (control is via
the Halo Lite unit only).

4
2. USING YOUR HALO LITE RF
Turn dial to adjust temperature or
navigate menu. Push dial to select.
The flame symbol
is present if the
heating is on.
Current
temperature
is the current
temperature in
your home.
The temperature
scale in the centre
will be orange and
red when the
heating is on.
Text relating to right
hand button. Shows
whether the Halo Lite
RF is in Auto, Manual
or Off mode.
Text relating to left
hand button. Use this
to enter the menu.
Target temperature
Right hand buttonLeft hand button

5
3. MAIN FEATURES
3.1 Mode Selection
You can choose to run your
Halo Lite RF in Auto, Manual or
Off mode.
Auto: Runs your heating to
pre-set scheduled times and
temperatures.
Manual: You control the
temperature by physically
turning the dial.
Off: Your heating will be set
to a low temperature (default
5 0C) for frost protection.
Move between Auto, Manual
and Off modes using the right
hand side button, scroll down
the menu using the dial and
push to select.
The current mode is displayed
bottom right.
Press the right hand button to
change the mode.
TOP TIP
Your Halo Lite RF is designed to provide the perfect balance of comfort and efficiency. It has a feature
called Enhanced Load Compensation which balances the temperature in your radiators to maintain
the target room temperature with optimum efficiency. As a result you might notice that when the
temperature in your home reaches the target your radiators are not hot to touch. By controlling the
temperature in your radiators your system is working in the most efficient way for you.
Use the dial to scroll between
the different modes (Auto,
Manual and Off) and then
push the dial or press the
right hand button to confirm
your selection.