Hamilton Beach 53602-CN User manual

BEFORE USE
使用前阅读
Questions?
Please call us – our friendly
associates are ready to help.
China: 400-852-2655
使用产品前请仔细阅读本使用说明书，
并妥善保管。
Visit www.hamiltonbeach.cn for our
complete line of products and Use and
Care Guides – as well as
delicious recipes, tips, and
to register your product online!
有关我们所有系列产品的使用与维护指
南 – 以及美味食谱、生活小贴士和
产品在线注册的更多信息，请访问
www.hamiltonbeach.cn 。
如有疑问？
请致电我们，我们的团队
随时准备为您提供帮助。
中国大陆客服热线：
400-852-2655
官方网站：www.hamiltonbeach.cn
型号：53602-CN
此说明书中图片仅供参考，
产品以实物为准。
English ..................... 2
简体中文 ................ 14
Quiet Blender
静音罩破壁机

2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of
fire, electric shock, and/or injury to persons, including the following:
1. Read all instructions.
2.
This appliance is not intended for use by persons
with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge,
unless they are closely supervised and instructed
concerning use of the appliance by a person
responsible for their safety.
3. This appliance should not be used by children.
Keep the appliance and its cord out of reach
of children. Children should be supervised to
ensure they do not play with the appliance.
4. T o protect against risk of electrical shock, do
not put cord, plug, base, or motor in water or
other liquid.
5. Unplug cord from socket when not in use,
before putting on or taking off parts, and before
cleaning.
6. Flashing light indicates ready to operate. Avoid
contact with moving parts.
7. Do not operate any appliance with a damaged
supply cord or plug, or after the appliance
malfunctions or has been dropped or damaged
in any manner. Supply cord replacement and
repairs must be conducted by the manufacturer,
its service agent, or similarly qualified persons
in order to avoid a hazard. Call the provided
customer service number for information on
examination, repair, or adjustment.
8. The use of attachments, including canning jars,
not recommended or sold by the appliance
manufacturer may cause a risk of injury to
persons.
9. Do not use outdoors.

3
10. Do not let cord hang over edge of table or
counter or touch hot surfaces, including stove.
11. Do not place on or near a hot gas or electric
burner, or in a heated oven.
12. Blades are sharp; handle carefully—especially
when assembling, disassembling, or cleaning
inside blender jar.
13. Do not use a broken, chipped, or cracked blender
jar.
14. To reduce the risk of injury, never place cutting
blade assembly on base without jar properly
attached.
15. Do not blend hot liquids in the personal jar.
16. Do not use broken, cracked, or loose cutting
blade assembly.
17. Always operate blender with lid in place.
18. Be careful if hot liquid is poured into blender as
it can be ejected out of appliance due to sudden
steaming.
19. When blending hot liquids, open the center vent
lid and close any edge cover opening intended
for pouring. To prevent possible burns: Do not
exceed the 3-cup (710-ml) level. Hot liquids may
push off lid during blending; start blending at
lowest speed.
20. Ensure collar on base of blending jar and
personal jar are tight and secure. Injury can result
if moving blades accidentally become exposed.
21. If the jar should twist or rotate when the motor
is switched ON, switch OFF ( ) immediately and
tighten jar in collar.
22. Do not leave blender unattended while it is
operating.
23. To disconnect cord, switch to OFF ( ). Then
remove plug from wall socket.
24. Do not use appliance for other than intended
purpose.

4
SAVE THESE INSTRUCTIONS
25. CAUTION! In order to avoid a hazard due to
inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched
on and off by the utility.
26. Do not operate more than 2 minutes ON at a
time.
27. Do not defeat the Quiet Shield interlock.
Other Consumer Safety Information
This appliance is intended to be used in household and similar
applications such as:
– staff kitchen areas in shops, offices, and other working
environments;
– farm houses;
– by clients in hotels, motels, and other residential-type
environments;
– bed and breakfast-type environments.
The length of the cord used on this appliance was selected to
reduce the hazards of becoming tangled in or tripping over a
longer cord. If a longer cord is necessary, an approved extension
cord may be used. The electrical rating of the extension cord must
be equal to or greater than the rating of the appliance. Care must
be taken to arrange the extension cord so that it will not drape
over the countertop or tabletop where it can be pulled on by
children or accidentally tripped over.
If the cutting unit blades lock and do not move, it will damage
the motor. Do not use. Call the customer service number for
information.
Do not place blender jar in the freezer filled with food or liquid.
This can result in damage to the cutting blade assembly, jar,
blender, and possibly result in personal injury.

5
Glass Blender Jar
Parts and Features BEFORE FIRST USE: After unpacking blender, wash everything except blender
base in hot, soapy water. Dry thoroughly. Wipe blender base with a damp
cloth or sponge. DO NOT IMMERSE BASE IN WATER. Care should be taken
when cleaning inside of blender jar as cutting blade assembly is very sharp.
Lid
Two-Piece Removable
Quiet Shield
Cutting Blade
Assembly
Sound-Absorbing Jar Pad
20-oz. Personal Jar
Drinking Lid
Personal Blender Jar
(optional accessory
on select models)
Handle
ON (I)/OFF ( ) (Power) Switch
Pour Spout
Vent
Jar Collar
CANCEL Button
PULSE Button
Base
5 Speed Buttons
Program Buttons
Shield Locking Button
Shield Locking Button
Model: 53602-CN
Type: B91
Ratings:
220-240V~ 50-60Hz 400W
CONTROL PANEL
PULSE
CANCEL
SMOOTHIE
ICE CRUSH
CLEAN

6
Parts and Features (cont.)
Lid: The lid is easy to put on, take off, and clean. Always use lid when
machine is in operation and to pour.
Blender Jar: Ounces, cups, and milliliters are clearly marked.
ON (I)/OFF ( ) (Power) Switch: The ON (I)/OFF ( )
(power) switch is located on right-hand side of
blender base. This lighted switch controls power to
blender.
Program Buttons: There are three program settings:
SMOOTHIE (), ICE CRUSH ( ), and CLEAN ( ).
Select desired program by pressing button for that
program.
5 Speed Buttons: Five speeds start at low and increase to high.
PULSE ( ) Button: Press and hold down PULSE
button to blend at high speed setting.
CANCEL ( ) Button: Stops blender at any time.
Quiet Shield: The Quiet Shield reduces amount of
noise from your blender. When placed over blender
jar, it muffles sound that your blender produces.
Always operate blender with Quiet Shield in place.
Personal Blender Jar: The personal blender jar makes it easier to
make beverages to take on the go.
Base: Contains motor. DO NOT IMMERSE BASE IN WATER.
Preparing Blender: After unpacking blender, wash everything except
blender base in hot, soapy water. Dry thoroughly. Wipe blender base
with a damp cloth or sponge. DO NOT IMMERSE BASE IN WATER.
Care should be taken when handling cutting blade assembly since it
is very sharp. Refer to care recommendations on page 13.
IMPORTANT: Blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call
our customer care center to obtain replacement parts.
Selecting Blender Settings: Select from three program settings or
five speed buttons from low to high ().
wWARNING
Burn Hazard. Metal parts under
blending jar get hot after use.
Do not touch.

7
IMPORTANT: The blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call
customer service number to obtain replacement parts.
1. Make sure blender is
unplugged. Place blender
base on clean, dry surface.
Place cutting blade assembly,
blade side up, through
opening in blending jar before
twisting collar onto bottom of
jar. Add Ingredients.
2. Place lid on jar. Place blender
jar on base.
3. Jar handle should be placed
with the mark range. 4. To assembly back shield.
Press both shield locking
buttons in while sliding back
shield around the base.
Using Your Blender

8
PROGRAM SETTINGS: Programs are optimized for recipe categories
and vary in blending speed and duration. The blender automatically
stops at the end of the program. Some recipes may require more or
less blending time.
(SMOOTHIE) – Blends frozen or fresh smoothies.
(ICE CRUSH) – Breaks ice into pieces small enough for slushies or
fine cocktails, using 1 to 1 1/2 cups (237 to 355 ml) ice cubes.
(CLEAN) – Add 5 cups (1.2 L) warm water and two drops dish
detergent to blender jar before starting the program for easy cleaning.
Rinse and dry.
6. Close Quiet Shield. Blender
will not operate until the
back Quiet Shield locked
at the right position and
the front Quiet Shield door
is completed in the down
position at same time.
5. To secure, press back shield
and blender base together.
7. Plug into outlet. Press ON (I)/
OFF ( ) switch to turn on
power to blender. The control
panel will flash and CANCEL
() button will continue to
flash, indicating blender is
ready for blending. Press
ON (I)/OFF ( ) switch to OFF
() position anytime machine
is left unattended.
Using Your Blender (cont.)

9
Using Manual Mode
1. Select speed and push
button.
2. Press a different speed button
during blending to increase
or decrease blending speed.
If using PULSE ( ), blender
will run at the high speed only
when PULSE ( ) button is
held down.
3. At end of blending cycle,
press CANCEL () button
to stop blending. Turn off
blender with ON (I)/OFF ( )
switch on right side of base.
Unplug blender from power
supply.
4. wWARNING Burn
Hazard. Do not fill blender
jar with hot liquid beyond the
3-cup (710-ml) level. Start
blending at lowest speed.
5. Lift Quiet Shield.
wWARNING Burn Hazard.
Metal parts
under blending
jar get hot after
extended use.
6. Remove blender jar. 7. Pour with lid on.

10
Using Personal Jar (optional)
1. Add ingredients. Carefully
place cutting blade assembly
and collar onto personal jar.
2. Turn personal jar upside
down and shake. Place onto
base.
3. Close Quiet Shield and plug
blender into outlet. Press
ON (I)/OFF ( ) switch to turn
on power to blender. Push
desired speed button. When
using PULSE ( ) button, the
blender will only run when
PULSE ( ) button is held
down. Press CANCEL ()
button to stop blending.
wWARNING Burn Hazard.
Do not blend hot ingredients.
Pressure may build, causing jar
to pop off and hot ingredients to
erupt.
wWARNING Laceration Hazard.
Handle blade carefully; it is very
sharp. Make sure unit is turned
OFF ( ) and is unplugged.
4. Unplug. Turn off blender with ON
(I)/OFF ( ) switch on right side of
base. Lift Quiet Shield. Remove
personal jar from base. Turn
bottom up; remove collar and
cutting blade assembly from jar.
5. Hand-tighten drinking lid onto
personal jar.

11
• ALWAYS place liquid in blender jar first, then remaining ingredients.
• For best performance, minimum amount of liquid needed per
recipe is 1 cup (8 ounces/237 ml). Add more liquid if food is not
blending properly. The amount of liquid needed will vary based
on other ingredients required for blending.
• If blending action stops during blending or ingredients stick to
sides of jar, stop blending and try pulsing or add more liquid to
blender jar.
• Do not store food or liquids in blender jar.
• Avoid bumping or dropping blender when in operation or at any
time.
• Cutting large whole fruits and vegetables may allow them to blend
more quickly.
• Do not fill blender jar past highest graduation marking.
• If ice or frozen fruit pieces are not blending, stop blender and pulse
a few times.
• Do not allow ice to stand or freeze in jar. Immediately crush ice
after placing in jar.
• Keep lid on for easy pouring.
Blender Tips
Personal Jar Tips
Blender Jar Tips
• If blending action does not start, stops during blending, or
ingredients stick to sides of the jar, press CANCEL () button.
Remove jar, shake contents, and return to blending.
• For best performance in the 20-oz. (591-ml) personal jar, minimum
amount of liquid needed per recipe is 3/4 cup (6 ounces/177 ml).
• When filling jar, place frozen ingredients or ice into jar first. When
turned upside down to blend, frozen items will be on top.
• Do not chop or process hard foods such as cheese, crackers, or
meat.
• Avoid bumping or dropping blender.
• Do not blend hot liquids in personal jar.
• Do not fill personal jar above MAX fill line.

12
How to Remove and Replace Quiet Shield
1. TO REMOVE: Start with front
shield; separate front shield
from back at rubber hinges.
2. Press tabs on both sides of
the blender while moving
back shield back with your
thumbs.
3. Slide back shield away from
blender base.
1. TO REPLACE: Press both
shield locking buttons in
while sliding back shield
around the base.
2. To secure, press back shield
and blender base together.
3. Pull front shield around rear
shield.
4. Secure round hinges of front
shield around rubber hinges.

13
Cleaning Your Blender
1. Unplug.
2. Remove Quiet Shield.
3. Remove blender jar and lid. Rotate collar counterclockwise until
collar and cutting blade assembly come apart from blender jar.
OR
3. Remove personal jar from base. Rotate collar counterclockwise
until collar and cutting blade assembly come apart from personal
jar.
4. Wipe blender base, control panel, and cord with a damp cloth
or sponge. To remove stubborn spots, use a mild, nonabrasive
cleanser.
5. Clean quiet shield with hot, soapy water. Dry thoroughly.
6. Blender jar, personal blender jar, lid, jar collar, and cutting blade
assembly are dishwasher-safe.
7. DO NOT use “SANI” setting when washing in the dishwasher.
“SANI” cycle temperatures could damage your product. Parts
may also be washed with hot, soapy water. Rinse and dry
thoroughly. Do not soak.
wWARNING Electrical Shock Hazard.
Disconnect power before cleaning. Do not immerse cord,
plug, base, or motor in water or other liquid.
wWARNING Burn Hazard.
Metal parts under blending jar get hot after extended use.
CLEANING BLENDER JAR:
• Add 5 cups (1.2 L) warm water and add two drops of dish soap. Press CLEAN () button. Rinse and dry thoroughly.
• To clean after blending oily foods, sprinkle baking soda in blender. Add 1 cup (237 ml) white vinegar. Mixture will bubble. When bubbling
subsides, add 1 1/2 cups (355 ml) water and blend on CLEAN () cycle. Wash any remaining residue with dish soap and water. Rinse and
dry thoroughly.

14
Troubleshooting
All program buttons are flashing.
• The motor is not rotating and is experiencing a locked rotor
condition. Turn power switch to OFF ( ) and remove blender jar.
Turn power switch to ON (I), run blender without jar in place on
HI for 30 seconds to 1 minute, and resume normal operation.
NOTE: Buttons start flashing 2–3 seconds after a problem has
occurred.
Blender fails to start and program lights are not illuminated.
• Make sure main power ON (I)/OFF ( ) switch is in the ON (I)
position.
• Check to see if unit is securely plugged into an electrical outlet of
proper voltage and frequency.
• Check to see if fuse for electrical outlet has blown or if a circuit
breaker has tripped.
Ingredients will not mix properly.
• Check to see if enough liquid has been added to ingredients.
Mixture should be fluid and free-running at all times.
• Solid pieces are too large.
• Container is too full. Do not fill past highest (6.5 cups/1.5 L)
graduation marking.
• Cutting blade assembly blades are not sharp or are damaged.
Inspect container and cutting blade assembly daily.
• Select speed to create a fluid blend.
Blender smells like it is burning.
• Turn off blender and allow unit to cool.
• Although motors are tested during the manufacturing process,
heavy use may cause curing of motor windings. The smell may
quickly dissipate after a few heavy uses.
• If smell continues after additional heavy uses, call our customer
care center.
There is grease around bottom of blender jar or on counter top.
• Monitor problem and source. This may indicate an issue with jar
bearings.
• Call our customer care center if condition persists.
Blender fails to start
• Jar handle is not place within the pointed range on the Jar pad.
• Jar / Jar collar/ Jar pad are not in place.
• Check to see if quiet shield is in position and completely closed.

15
重要安全说明
当使用电器时，应始终遵守基本的安全防范措施，以减少火灾、触电和/或人身伤害的风险，包括以下内容：
1.
阅读所有相关说明。
2. 本电器不适合以下人群使用：行动不便者、精神或
智商缺陷者、缺少经验和常识者，除非他们在监护
人的密切监督和指导下使用，以确保安全。
3. 本电器不得由儿童使用。本电器及其电源线应远
离儿童。请勿将本电器用于儿童玩耍。
4. 为防止触电危险，请勿将电源线、插头底座或电
机放入水或其他液体中。
5. 当本电器未使用时、安装或拆解部件和清洁该电
器前，请从插座拔下电源线。
6. 闪光灯指示操作准备就绪。避免接触正在运动的
部件。
7. 在下列情况下，请勿使用电器：电源线或插头破
损、电器出现故障、电器跌落或已经出现任何形
式的损坏。电源线更换和维修必须由制造商、维
修代理商或同等资质的人员进行，以避免险情。
请拨打我们的客服电话，咨询有关电器检查、修
理或调整的相关信息。
8. 使用非本电器制造商建议或出售的包括搅拌杯在内
的附件，可能会导致人身伤害。
9. 请勿户外使用。
10. 请勿将电源线搭置在桌台边缘上或与发热表面接
触，包括炉子。
11. 请勿将电器放置在高温气体或电炉之上或附近，
或放置在加热的烤箱内。
12. 刀片很锋利；尤其在组装、拆解或清洁搅拌杯内
部时，务必要小心处理。
13. 请勿使用破损、有裂口或裂痕的搅拌杯。

16
14. 为了降低受伤风险，在未将搅拌杯正确安装前，
禁止将切割刀片组件置于底座上。
15. 请勿在个人搅拌杯中搅拌热液体。
16. 请勿使用裂口、裂痕或松动的切割刀片组件。
17. 务必在搅拌杯盖子盖好后才操作破壁机。
18. 当心，如果热液体倒入到破壁机中，由于突然的
蒸汽可能会导致液体从破壁机中喷出。
19. 搅拌热液体时，打开透气孔盖，同时盖好杯盖和
倾倒口盖。为了防止可能的烫伤：请勿超过 3 杯
（710 毫升）液位。搅拌过程中热液体可能会将盖
子推出；请以最低速度开始搅拌。
20. 确保搅拌杯底座的杯座和个人搅拌杯卡紧。如果
转动刀片意外暴露，则可能导致受伤。
21. 如果在电机开启时搅拌杯出现扭转或转动，请立
即将开关转动至OFF( )关闭位置，然后将搅拌杯
紧固在杯座上。
22. 请勿让破壁机在无人看管的情况下运行。
23. 拔掉电源线前，将开关转到OFF( )位置。然后从
电源插座拔掉电源线插头。
24. 请勿将该电器用于非预期用途。
25. 注意！为了避免由于热熔断器意外重置导致的危
险，本电器禁止通过外接开关设备（例如：定时
器）进行供电，或禁止连接到由供电部门定期开
启和关闭的电路。
26. 请勿一次运行 2 分钟以上。
27. 请勿破坏静音罩的联锁装置。

17
请妥善保管说明书！
其他用户安全信息
本电器预定用于家用及类似应用场合，例如：
– 办公室、商铺及其它工作环境的员工厨房区；
– 农舍；
– 酒店、汽车旅馆和其它居住型环境的旅客使用；
– 以及住宿早餐型环境场合。
本电器电源线的长度经过设计挑选，以减少长电源线缠绕或绊
倒的危险。倘若需要更长的电源线，可使用经认证的电源延长
线。电源延长线的额定功率必须等于或大于本电器的额定功
率。电源延长线使用时需特别注意，以防将其搭设在工作台或
桌台上，造成儿童扯拉或绊倒他人。
如果切割装置刀片锁住而不能移动，可能会损坏电机。请勿使
用。要了解有关信息，请拨打售后服务电话。
请勿将装有食物或液体的搅拌杯放入冰箱中。这可能导致切割
刀片组件、搅拌杯、破壁机损坏及可能的人身伤害。

18
玻璃搅拌杯
部件和功能 首次使用前：拆开破壁机的包装后，用带清洁剂的温水清洗破壁机底座
以外的所有组件。彻底晾干。用湿布或海绵擦拭破壁机底座。请勿将底
座浸入水中。清洁搅拌杯的内部时，请务必小心，因为刀片组件很锋利。
盖子
两件式易拆
卸静音罩
切割刀
片组件
吸声搅拌杯垫
20盎司（600毫
升）个人搅拌杯
饮用杯盖
个人搅拌杯
(某些机型提供可选附件)
手柄
ON(I)/OFF( )(电源)开关
倾倒口
透气孔盖
搅拌杯杯座
取消 按钮
脉冲 按钮
底座
5 个速度按钮
程序按钮
静音罩锁定按钮
静音罩锁定按钮
型号：53602-CN
类型：B91
额定值：
220-240V~ 50-60Hz 400W
档位说明
脉冲
取消
冰沙
刨冰
清洁

19
部件和功能（续）
盖子：盖子的设计便于盖上、拿下及清理。操作机器和倾倒食材
时，务必使用盖子。
搅拌杯：清楚标示有计量单位（盎司、杯和毫
升）。
ON(I)/OFF ( ) (电源) 开关：ON (I)/OFF ( )
(电源)开关位于破壁机底座的右侧。此开关控制
破壁机的电源。
程序按钮：有三个程序设置：
冰沙 ()：设置搅拌冰或者新鲜冰沙。破壁机先以低速脉冲运行
5次，然后变换为高速运行，共运行约75秒。
刨冰 ()：设置将冰块粉碎。破壁机以中速脉冲
和低速脉冲交替运行，共运行约60秒。
清洁 ()：设置清洗此破壁机。从低速开始变为
高速，共运行约60秒。
按对应按钮选择所需的程序。
5 个速度按钮：五个速度按钮，从低速到高速。请勿一次运行超
过2分钟。
脉冲 ( ) 按钮：按住脉冲按钮以高速设置进行搅拌。
取消 ( ) 按钮：按下可随时停止破壁机。
静音罩：静音罩用来减少破壁机发出的噪音。
务必装好静音罩再操作破壁机。
个人搅拌杯：个人搅拌杯便于将饮料随身携带。
底座：含有电机。请勿将底座浸入水中。
准备破壁机：拆开破壁机的包装后，用带清洁剂的温水清洗破壁
机底座以外的所有组件。彻底晾干。用湿布或海绵擦拭破壁机底
座。请勿将底座浸入水中。处理切割刀片组件时要非常小心，因
为它非常锋利。请参照第26页的护理建议。
重要提示：搅拌杯和切割刀片组件在正常使用过程中可能会磨
损。请务必检查搅拌杯是否有裂纹、缺口或裂缝。请务必检查切
割刀片组件是否有破损、破裂或松动。如果搅拌杯或切割刀片组
件损坏，请勿使用。请致电我们的客户服务中心，以获得更换
部件。
选择破壁机设置：从三个程序设置中选择或从五个速度按钮中从
低到高()选择。
w 警告
烫伤危险。长时间使用料理机后，其
杯下的金属部分会发烫。
请勿触摸。

20
使用您的破壁机 重要提示：您的搅拌杯和切割刀片组件在正常使用过程中可能会磨
损。请务必检查搅拌杯是否有裂纹、缺口或裂缝。请务必检查切割
刀片组件是否有破损、破裂或松动。如果搅拌杯或切割刀片组件损
坏，请勿使用。请拨打我们的客服电话，以获得更换部件。
1. 确保拔掉破壁机的电源。
将破壁机底座放置在清洁干
燥的表面上。将刀片组件朝
上放入杯座，将搅拌杯拧入
杯座到杯座指示位置。添加
食材。
2. 盖上搅拌杯盖。将搅拌杯放
置到底座上。
3. 搅拌杯手柄应对着标记范围
放置。 4. 组装静音罩后壳。当沿着底
座周围滑动静音罩后壳时，
按静音罩两侧的锁定按钮。