Hamilton Beach 840123500 User manual

Can Opener
English .................................................. 2
USA: 1-800-851-8900
Canada : 1-800-267-2826
En México 01-800-71-16-100
840123500
READ BEFORE USE

3
This appliance is intended for household use only.
This appliance is equipped with a polarized plug. This type of plug
has one blade wider than the other. The plug will fit into an electrical
outlet only one way. This is a safety feature intended to help reduce
the risk of electrical shock. If you are unable to insert the plug into
the outlet, try reversing the plug. If the plug should still fail to fit,
contact a qualified electrician to replace the obsolete outlet. Do
not attempt to defeat the safety purpose of the polarized plug by
modifying the plug in any way.
The length of the cord used on this appliance was selected to
reduce the hazards of becoming tangled in, or tripping over a longer
cord. If a longer cord is necessary an approved extension cord may
be used. The electrical rating of the extension cord must be equal to
or greater than the rating of the can opener. Care must be taken to
arrange the extension cord so that it will not drape over the counter-
top or tabletop where it can be pulled on by children or accidentally
tripped over.
WARNING: To reduce the risk of personal injury, keep hair and loose
clothing away from lid opener and other moving parts of the can
opener while using.
OTHER CONSUMER SAFETY INFORMATION
2
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
When using electrical appliances, basic safety precautions should
always be followed, including the following:
1. Read all instructions.
2. Remove can from can opener and check can contents to
remove any pieces of label or metal shavings.
3. To protect against risk of electrical shock, do not put can opener
body, cord, or plug in water or other liquid.
4. Close supervision is necessary when any appliance is used by
or near children.
5. Unplug from outlet when not in use, before putting on or taking
off parts, and before cleaning.
6. Avoid contacting moving parts.
7. Do not operate any appliance with a damaged cord or plug, or
after the appliance malfunctions or is dropped or damaged in any
manner. Call our toll-free customer service number for information
on examination, repair, or electrical or mechanical adjustment.
No user-serviceable parts inside.
8. The use of attachments not recommended or sold by Hamilton
Beach/Proctor-Silex, Inc. may cause fire, electric shock, or injury.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter, or touch
hot surfaces.
11. Do not place on or near a hot gas or electric burner, or in a
heated oven.
12. Do not open pressurized (aerosol-type) cans.
13. Do not open cans of flammable liquids such as lighter fluid.
14. Do not use appliance for other than intended use.

5
1. Mounting Screws (4)
2. Mounting Washers (4)
3. Mounting Spacers (2)
4. Cutting Assembly
Release Button
5. Magnetic Lid Holder
6. Can Guide Pin
7. Geared Wheel
8. Piercing Lever
9. Cord Storage
4
Parts and Features Installation
This can opener is designed to be installed under a cabinet or
shelf. When selecting a location for installation, consider the
following:
• An electrical outlet should be within easy reach of the plug
so the cord does not drape over a heating or cooking appli-
ance, a sink or basin, or get in the way of your normal work
space. HINT: Before drilling any holes, plug unit into desired
outlet and hold can opener in proposed location to ensure
cord will reach.
• Do not install can opener above a cooking or heating unit,
such as a stove, or above a sink or basin.
1. Remove the mounting template page from the back of the
Use & Care booklet. Align the dashed line on the template
with the front edge of the top side of the mounting surface
and tape in place. Drill four 3⁄16” (5 mm) holes as indicated
and remove the template from the mounting surface.
2. Select the desired number of spacers to use (see Table A
on previous page). Place spacer(s) on top of can opener
(if applicable).
3. Insert screw through one of the white
plastic washers with the flat side of the
washer away from the screw head
(see Figure 1). Insert screw through
hole drilled in mounting surface and
into corresponding hole in can opener.
Tighten several turns. Do not tighten
all the way at this time. Repeat with
remaining three screws.
4. Tighten all four screws. Do not overtighten.
Figure 1
Height of Front Overhang (Cabinet or Shelf) Spacers Needed
0 to 1⁄2inch (1 cm) 0
1⁄2to 11⁄4inches (1 to 3 cm)
1
more than
11⁄4inches (3 cm) 2
Table A

7
6
To open cans:
1. Plug cord into electrical outlet.
2. Raise piercing lever up.
3. Hold can against opener support.
4. Place rim of can firmly under can guide
pin and against the geared wheel.
5. Press piercing lever all the way down.
6. The motor will begin turning can
and cutting lid. (It is not necessary to
hold the piercing lever down or to hold
the can during the cutting action.)
7. The motor will automatically stop when
the can is open.
8. Remove can from can opener and
check can contents to remove any
pieces of label or metal shavings.
To open bottles:
Support bottle beneath the bottle opener with one hand.
Place one hand behind the unit for additional support.
Open bottles slowly to avoid spilling contents.
Using Your Can Opener
1. Unplug cord from electrical outlet.
2. To remove the cutting head assembly,
press release button.
3. Wash cutting head assembly in hot
soapy water. Rinse and dry thoroughly.
Cutting head assembly may also be
placed in top rack of dishwasher.
4. Wipe the can opener body and the
area behind the cutting head assembly
with a damp cloth. Never immerse the
can opener in water.
5. To re-assemble, raise lever slightly
then slide the assembly onto the body
until the release button clicks into
place.
Remove
Re-assemble
Cleaning Your Can Opener

89
The following warranty applies only to product purchased in the
United States and Canada.
LIMITED WARRANTY
This product is warranted to be free from defects in material and workmanship for a
period of two (2) years for Hamilton Beach Portfolio products, one (1) year for Hamilton
Beach products or one hundred eighty (180) days for Proctor-Silex products from the
date of original purchase, except as noted below. During this period, we will repair or
replace this product, at our option, at no cost. THE FOREGOING WARRANTY IS IN
LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR
ORAL INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. ANY LIABILITY IS EXPRESSLY LIMITED TO AN AMOUNT
EQUAL TO THE PURCHASE PRICE PAID, AND ALL CLAIMS FOR SPECIAL,
INCIDENTAL AND CONSEQUENTIAL DAMAGES ARE HEREBY EXCLUDED. There is
no warranty with respect to the following, which may be supplied with this product:
glass parts, glass containers, cutter/strainer, blades, and/or agitators. This warranty
extends only to the original consumer purchaser and does not cover a defect resulting
from abuse, misuse, neglect, use for commercial purposes, or any use not in
conformity with the printed directions. This warranty gives you specific legal rights,
and you may also have other legal rights which vary from state to state, or province to
province. Some states or provinces do not allow limitations on implied warranties or
special, incidental or consequential damages, so the foregoing limitations may not
apply to you.
If you have a claim under this warranty, DO NOT RETURN THE APPLIANCE TO THE
STORE! Please call our CUSTOMER SERVICE NUMBER. (For faster service please
have model, series, and type numbers ready for operator to assist you.)
CUSTOMER SERVICE NUMBERS
In the U.S. 1-800-851-8900
In Canada 1-800-267-2826
hamiltonbeach.com or proctorsilex.com
KEEP THESE NUMBERS FOR FUTURE REFERENCE!
• The can opener will easily open all standard size cans.
• If there is a bump, dent, or heavy seam in the rim of the
can, open the other end of the can or start cutter just
beyond the problem area.
• The motor of your can opener is permanently lubricated
and will require no oiling.
• To use the cord storage on the back of the opener, push in
or pull out the cord as needed.
• If piercing lever does not move freely, remove and clean
the cutting head assembly.
• To lock the cord, turn cord sideways and slide up into
narrow portion of cord storage.
If you have a question about your can opener, call our
toll-free customer service number. Before calling, please
note the model, type, and series numbers and fill in that
information below. These numbers can be found on the
bottom of your can opener. This information will help us
answer your question much more quickly.
MODEL:_____________ TYPE:_____________ SERIES: ______________
Tips and Hints for Best Use
Customer Service
2/04
H AMILTON B EACH P ROCTOR -S ILEX ,I NC .P ROCTOR -S ILEX C ANADA ,I NC .
263 Yadkin Road, Southern Pines, NC 28387 Picton, Ontario K0K 2T0
840123500 hamiltonbeach.com •hamiltonbeach.com.mx
proctorsilex.com •proctorsilex.com.mx