Hamilton Beach 40715 User manual

Espresso Maker
Machine à café
espresso
Cafetera para
espresso
English ....................... 2
Français.................... 16
Español .................... 30
READ BEFORE USE
LIRE AVANT UTILISATION
LEA ANTES DE USAR
hamiltonbeach.com
For recipes, tips and product
information.
hamiltonbeach.ca
Pour des recettes, des conseils et
des renseignements sur le produit.
hamiltonbeach.com.mx
Para recetas, consejos e información
del producto.
ENTER TO WIN $100
TO SPEND ON WEBSITE
Scan code or visit
register.hamiltonbeach.com
PARTICIPEZ POUR COURIR LA CHANCE DE
GAGNER UN MONTANT DE 100 $
À DÉPENSER SUR NOTRE SITE WEB
Balayez le code ou visitez le
register.hamiltonbeach.com
INGRESE PARA TENER LA OPORTUNIDAD
DE GANAR $100 PARA GASTAR EN
NUESTRO SITIO WEB
Escanee el código o visite
register.hamiltonbeach.com
Open to US customers only • Ce concours
s’adresse aux clients des États-Unis seulement
• Este concurso está disponible sólo a clientes
de los Estados Unidos
Le invitamos a leer cuidadosamente este
instructivo antes de usar su aparato.

2
IMPORTANT SAFEGUARDS
1. Read all instructions.
2. This appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental capabilities,
or lack of experience and knowledge, unless they are closely
supervised and instructed concerning use of the appliance by a
person responsible for their safety.
3. Close supervision is necessary when any appliance is used by or
near children. Cleaning and user maintenance shall not be made
by children without supervision. Children should be supervised to
ensure that they do not play with the appliance.
4. Do not touch hot surfaces. Use handles or knobs. Care must be
taken, as burns can occur from touching hot parts or from spilled,
hot liquid.
5. To protect against electric shock, do not place cord, plug or
espresso maker in water or other liquid.
6. Unplug from outlet when espresso maker is not in use and before
cleaning. Allow to cool before putting on or taking off parts and
before cleaning the appliance.
7. Espresso maker must be operated on a flat surface away from
the edge of counter to prevent accidental tipping.
8. The use of accessory attachments not recommended by the
appliance manufacturer may cause injuries.
9. Do not operate any appliance with a damaged supply cord or
plug, or after the appliance malfunctions or has been dropped or
damaged in any manner. Supply cord replacement and repairs
must be conducted by the manufacturer, its service agent, or
similarly qualified persons in order to avoid a hazard. Contact
Customer Service for information on examination, repair, or
adjustment as set forth in the Limited Warranty.
10. Do not use outdoors.
11. Do not let cord hang over edge of table or counter or touch hot
surfaces, including the stove.
12. Do not place espresso maker on or near a hot gas or electric
burner or in a heated oven.
13. To disconnect espresso maker, turn controls to OFF ( ) and then
remove plug from wall outlet. To unplug, grasp the plug and pull
from the outlet. Never pull from the power cord.
14. WARNING! To reduce the risk of fire or electric shock, do not
remove the bottom cover. No user-serviceable parts are inside.
Repair should be done by authorized service personnel only.
15. Do not use appliance for other than intended use.
16. WARNING! Be certain filter holder is securely in place when
brewing espresso. Scalding may occur if the filter holder is
removed during the brewing cycle.
17. Do not place espresso maker in a cabinet when in use.
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons,
including the following:
SAVE THESE INSTRUCTIONS

3
Other Consumer Safety Information
This product is intended for household use only.
wWARNING
Electrical Shock Hazard: This appliance has a polarized
plug (one wide blade) that reduces the risk of electric shock. The plug fits
only one way into a polarized outlet. Do not defeat the safety purpose of
the plug by modifying the plug in any way or by using an adapter. If the
plug does not fit, reverse the plug. If it still does not fit, have an electrician
replace the outlet.
The length of the cord used on this appliance was selected to reduce
the hazards of becoming tangled in or tripping over a longer cord. If a
longer cord is necessary, an approved extension cord may be used. The
electrical rating of the extension cord must be equal to or greater than the
rating of the appliance. Care must be taken to arrange the extension cord
so that it will not drape over the countertop or tabletop where it can be
pulled on by children or accidentally tripped over.
To avoid an electrical circuit overload, do not use another high-wattage
appliance on the same circuit with this appliance.

4
1 2
Parts and Features
To order parts, visit:
hamiltonbeach.com/parts
1Espresso/Pod Filter Holder
2Espresso Filter Holder
3Ground Espresso/Pod Filter Holder
4Removable Cup Rest
5Removable Drip Tray
6Lid
7Brew Head
8Frothing Nozzle and Cover
9Water Reservoir Lid
10 Removable Water Reservoir
11 Measuring Scoop
11a Frothing Nozzle Wrench
11b Tamping Tool
12 ON/OFF Indicator Light
13 Ready Indicator Light
14 Start Button Light
15 ON/OFF Button
16 Steam/Espresso Button
17 Start Button (begins dispensing)
18 Steam Control Dial
11
11a
11b
3
4
5
7
6
8
9
10
15
16
17
18
12
13
14

5
Wash all removable parts in warm,
soapy water. No parts may be washed
in a dishwasher.
Water pump must be “primed” before
first use to work properly.
Operating without water in Water
Reservoir can permanently damage the
appliance.
Before First Use (Priming the Pump)
4. When unit is ready, Temperature
Ready Light next to Steam/Espresso
Button will come on. Place an empty
container under Frothing Nozzle so that
nozzle is completely inside container.
5. Turn Steam Control Dial
counterclockwise to (steam). Press
Start Button to pump hot water out of
Frothing Nozzle for cleaning purposes.
6. Fill container about halfway full.
NOTE: Green light next to Steam/
Espresso Button will go off once Start
Button is pushed.
7. Press Start Button again to turn
Frothing Nozzle off; then turn Steam
Control Dial clockwise to (no
steam).
2. Fill Removable Water Reservoir to
MAX fill line with cold water and
replace securely on back of unit.
1. Make sure all three buttons are in
OFF position (not pushed in) and that
Steam Control Dial is turned fully
clockwise to (no steam).
3. Plug into outlet. Press ON/OFF Button
to turn unit ON.
wWARNING
Electrical Shock Hazard. Do not
immerse machine, cord, or plug in water or any other liquid.

6
Before First Use (Priming the Pump, cont.)
8. Place a container under Brew Head; it
should be wide enough to catch water
from both spouts. Press Start Button
and dispense any remaining water
from Removable Water Reservoir.
9. Press Start Button again to turn off. 10. Press ON/OFF Button to turn unit
OFF. Light next to button will go off.
Unplug.
11. Wash all parts again with warm,
soapy water and dry thoroughly.
See “Care and Cleaning” for full
instructions.
wWARNING
Electrical Shock Hazard. Do not immerse
machine, cord, or plug in water or any other liquid.

7
How to Use
OR
1. Make sure all three buttons are in
off position (not pushed in) and that
Steam Control Dial is turned fully
clockwise to (no steam).
2. Fill Removable Water Reservoir with
desired amount of cold water and
replace securely on back of unit.
3. Place Ground Espresso Holder into Filter
Holder. Add one tablespoon (5 g) of ground
espresso for each cup being made. Use
shallow Holder for 1 cup (237 mL) and deep
Holder for 2 cups (474 mL). Press grounds
firmly into Holder with Tamping Tool.
3. Place pod into Filter Holder. When
using single-serve pod, always use
shallower Espresso/Pod Filter Holder.
Never put two pods in either Filter
Holder at one time.
4. Holding handle securely, align raised dimple on exterior of Espresso/Pod Filter Holder
with cutout notch on inside of Filter Holder. Rotate Espresso/Pod Filter Holder 180º to
secure in base. Ensure no grounds are on rim of Filter Holder.
5. Rotate Filter Holder to right until it is
firmly locked into place. 6. Plug into outlet. Press ON/OFF Button to turn unit ON. When ready,
Temperature Ready Light next to
Steam/Espresso Button will come on.

8
How to Use (cont.)
7. Place one or two cups under Brew
Head spouts. If using one cup, use
one wide enough to catch espresso
from both spouts.
8. Press Start Button. Start Button
Light will illuminate and espresso
will begin to flow. Press Start Button
again at any time to stop flow. As
espresso dispenses, it will gradually
look lighter in color. Allow espresso
to drip from Filter Holder for 15-20
seconds before removing cup(s).
9. Wait about 1 minute before removing
Filter Holder from machine to allow
espresso grounds and excess water
still flowing through pump to finish.
NOTE: Some water may continue to
drip intermittently from Brew Head.
This is normal and a result of product
operation.
10. To empty espresso grounds and/or
an espresso pod from Filter Holder ,
flip plastic lever located on handle
of Filter Holder and hold lever open.

9
1. Ensure there is water in Removable
Water Reservoir and move Frothing
Nozzle to right of unit.
How to Steam Milk
wWARNING Burn Hazard. Vapor and water emitted from frothing nozzle are hot.
11. Keeping thumb on handle lever,
dispose of espresso grounds and/or
pod filter.
12. Ensure Filter Holder is cool. Align
raised dimple on Espresso/Pod Filter
Holder with cutout notch in Filter
Holder base; then remove.
13. Clean Filter Holder and Brew Head after each use. See “Care and Cleaning.” DO NOT
allow grounds to remain in Filter Holder ; this can clog Filter Holder and cause unit to
malfunction.
2. Plug into outlet. Press ON/OFF Button
to turn machine on. When heated,
Temperature Ready Light next to Steam/
Espresso Button will come on.
3. Press Steam/Espresso Button. 4. Turn Steam Control Dial clockwise to
(no steam).

10
How to Steam Milk (cont.)
5. Fill a metal or ceramic cup 1/3 full with
cold milk. A stainless steel cup and
skim milk are recommended.
6. Hold cup underneath Frothing Nozzle,
leaving about 1/4 to 1/2 inch between
Nozzle and bottom of cup.
7. When green Temperature Ready
Light turns on, turn Steam Control
Dial counterclockwise to start
steaming milk. Milk is steamed when
cup becomes warm.
NOTE: After each time steaming
and to prevent clogging Nozzle, hold
a cup with water under Nozzle and
“steam” into cup to clean.
8. Turn Steam Control Dial to (no
steam). Press ON/OFF Button (light
will go off); then press Steam/
Espresso Button again to turn off.
Unplug from outlet. Clean Frothing
Nozzle after each use.