Hamilton appio WMS-1 User manual

Wireless Multi-room Speaker WMS-1
appio
User Manual
Appio Manual indesign aug2019 v6.indd 1 28/08/2019 14:47

Appio Manual indesign aug2019 v6.indd 2 28/08/2019 14:47

Contents
Product Overview
Connect your device to the network
Adding more devices
Connecons
Mul-room playing
Spofy / Tune-In / EQ
Now playing interface
Firmware update
Frequently asked quesons
1
2
5
6-7
8
9
10
11
12
CONTENTS
3-4
1
Disclaimer & limited warranty 13
Wired connecon 4
Appio Manual indesign aug2019 v6.indd 3 28/08/2019 14:47

Front Controls White Light -Wi-Fi
Green Light - Aux in
1. PLAY/PAUSE
2. VOLUME DOWN
3. VOLUME UP
4. MODE/POWER Press to change mode or press and hold for 3 seconds to turn device on/o.
Rear Connecons
5. WPS Buon (Wi-Fi protected set up)
6. RESET Buon
7. AUX In (3.5mm audio jack)
8. DC Input 18V 2A
9. LAN Port - This gives you the opon of connecng the appio speaker directly
to your router.
PRODUCT OVERVIEW
Front Panel: LED Display
Back Interface: WPS, RESET, AUX IN, DC IN 18V 2A
Dimensions: W 220 x H 135 D 126mm
Support OS: Android 4.0 or above. iOS 6.0 or above.
Wi-Fi network compability: 802 11n/b/g/n
.
4
3
2
1
Technical Details
2
Appio Manual indesign aug2019 v6.indd 4 28/08/2019 14:47

3
CONNECT YOUR DEVICE TO THE NETWORK
1. Download the Hamilton Player app
from the app Store for iOS and Google Play for Android.
2. Power on the Hamilton appio speaker, the LED indicator will
ash. Open the app and select add the device.
3. Go to your Wi- sengs page and connect to the appio Wi-
network (APPIO_XXXX).
4. Return to the Hamilton player app
2 43
Appio Manual indesign aug2019 v6.indd 5 28/08/2019 14:47

Your appio speaker can now be connected via an Ethernet cable from
your speakers to your router (Please refer to diagram on page 6) called
Wired connecons via Ethernet
4
CONNECT YOUR DEVICE TO THE NETWORK
5. Connect your Hamilton appio to your home router,
Enter your network password and press connue.
6. You are now connected to your home network.
7. Choose device name or custom name, then press the >
symbol.
8. Reconnect to your home network.
9. Your appio speaker is now ready to play music.
567
89
WIRED CONNECTION
Appio Manual indesign aug2019 v6.indd 6 28/08/2019 14:47

ADDING MORE DEVICES
1. Click “+” on the “ DEVICE LIST” page.
2. Go to your Wi- sengs page and connect to the appio Wi-
Network (APPIO_XXXX).
3. Return to the Hamilton player app
4. Connect your Hamilton appio to your home router.
Enter your network password and press connue.
5. You are now connected to your home network.
6. Choose device name or custom name, then press the >
Symbol.
7. Reconnect to your home network.
8. Your appio speaker is now ready to play music.
5
Appio Manual indesign aug2019 v6.indd 7 28/08/2019 14:47

Single Speaker
Stereo Speakers
Note : Router not included
CONNECTIONS
LR
6
Appio Manual indesign aug2019 v6.indd 8 28/08/2019 14:47

MP3 / ITUNES
INTERNET RADIO
Room 1
Room 2
Room 3
Room 4
LR
Note : Router not included
CONNECTIONS
LR
LR
LR
7
Appio Manual indesign aug2019 v6.indd 9 28/08/2019 14:47

MULTI-ROOM PLAYING
Play synchronously or independently. Group devices and play the
same music through all speakers in your network or you can
independently play dierent music to selected speakers creang
a mul-zone audio system.
1. Open the “DEVICE LIST” screen.
2. Click and drag any device bar into any device bar, this creates a
group in Which all the speakers will play the same music.
3. Click and drag any slave Wi-Fi receiver out of its respecve
group, this Un-groups the Wi-Fi receiver and they will now play
individually.
8
Appio Manual indesign aug2019 v6.indd 10 28/08/2019 14:47