Hammond Manufacturing CONTEMPRA 2 Series User manual

PAGE 1 OF
REV.
TOOL BOX
BUL10283
A
1
CONTEMPRA 2 - SERIES
ASSEMBLY INSTRUCTIONS FOR
CCE - CABLE ENTRY DOOR ADAPTER
HAMMOND
MANUFACTURING TM
ELECTRONICS GROUP
visit our website @ www.hammondmfg.com
ITEM No. DESCRIPTION QTY
1CCE----BK1 1
2SCREW 8-32 X 1/2 LG 6
3UT 8-32 KEPS 6
PARTS LIST
ASSEMBLY INSTRUCTIONS:
A) Ensure all parts are available. See BOM list.
B) Remove the 4 knock out holes located at the bottom of frame
opening use proper striking tool). Detail A shows location of knock
out holes
C) Line up CCE at the base of the cabinet so the holes line up with
the K.O. holes. Install screws supplied from the inside of the CCE
and fasten using nut supplied Detail B).
D) If additional support is desired, then drill one 1/4" hole on each
side using CCE as a template and fasten additional hardware
supplied
Placement of CCE
A
DETAIL A
B
DETAIL B
1
Holes to knock out
Flat Head
Screw Driver Hammer Striking
Tool

Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Hammond:
CBA1975CG1 CBA1975BK1