Hammond Manufacturing SDC Series User manual

PAGE 1 OF
REV.
BUL87089
A
6
SDC
visit our website:
visitez notre site Web:
TOOL BOX
BOÎTE À OUTILS
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
PRODUCT SERIES
SÉRIE DE PRODUIT
www.hammondmfg.com
PARTS LIST
LISTE DES PIECES
ITEM 2
SDC COVER
QTY 1
ITEM 1
SDC BODY
QTY 1
ITEM 1
COVER SCREW (PHILLIPS)
QTY 4
1
2
3

PAGE OF
REV.
BUL87089
A
6
ASSEMBLY INSTRUCTIONS
2
INSTRUCTIONS DE MONTAGE
SDC
PRODUCT SERIES
SÉRIE DE PRODUIT
2
1

PAGE OF
REV.
BUL87089
A
6
ASSEMBLY INSTRUCTIONS
3
INSTRUCTIONS DE MONTAGE
SDC
PRODUCT SERIES
SÉRIE DE PRODUIT
IMPORTANT SAFETY CAUTIONS
NOTE : Read all instructions before installing and using the product.
LOADING RACK SYSTEM
NOTE : When loading equipment into the
enclosure or rack system ensure weight is
distributed so that heavier loads are placed
towards the bottom of the rack to avoid
unstable conditions.
The following parts are not effectively bonded to the Protective Earth
Terminal (PET): Mounting rails, Cover, Panels, and Door. If any part
needs to be bonded to the PET it shall be done in accordance with
Article 250 of the National Electric Code.
To reduce risk of personal injury and product damage always ensure a
a sufficient amount of personnel are present when loading, unloading,
and moving the enclosure or rack system.
Evenly distribute all mounted loads and equipment to ensure stability
within the system.
Always fully mount and secure enclosure or rack system before loading
equipment.
Ensure unit is plumb and level for proper operation.
Route all chords and cables away from moving parts and all possible
pinch points.
Ensure that the floor/wall structure is able to withstand the weight of
the cabinet while fully loaded.
Installation and assembly must be performed by qualified personnel.
150 lb
Maximum Weight Capacity:
Suitable for mounting on concrete or other noncombustible surface only.
Wall (Rack-Mounted)
50 lb
Maximum Weight Capacity:
Wall (Rails Removed)
150 lb
Maximum Weight Capacity:
Ceiling/Under Desk
800 lb
Maximum Weight Capacity:Freestanding

PAGE OF
REV.
BUL87089
A
6
ASSEMBLY INSTRUCTIONS
4
INSTRUCTIONS DE MONTAGE
SDC
PRODUCT SERIES
SÉRIE DE PRODUIT
2
ENGLISH
Different wall materials require
different types of screws.
Choose screws that are
suitable for use in your wall.
FRANÇAIS
Différents matériaux de mur
requière différents types de
vis. Choisir les vis
appropriées à votre mur.
1
WALLMOUNT INSTRUCTIONS
LEVEL NIVEAU
16" TEMPLATE / MODÈLE

PAGE OF
REV.
BUL87089
A
6
ASSEMBLY INSTRUCTIONS
5
INSTRUCTIONS DE MONTAGE
SDC
PRODUCT SERIES
SÉRIE DE PRODUIT
GROUNDING AND BONDING
INSTRUCTIONS
NOTE : PROTECTIVE EARTH TERMINALS (PET) ARE LABELLED
WITH THE PROPER SYMBOL SHOWN IN FIGURE 1 AND ARE
THE ONLY TERMINALS TO WHICH THE PROTECTIVE EARTH
GROUND CONNECTION SHALL BE ATTACHED TO.
NOTE : ALL PROTECTIVE EARTH AND BONDING CONNECTIONS
SHALL BE IN ACCORDANCE WITH ARTICLE 250 OF THE
NATIONAL ELECTRIC CODE.
1
Included within optional grounding kit (GRDKIT01):
2 x Bonding Wire
10 Gauge
1/4" Ring Terminals
4 x 10-32
Phillips Screw
Pan Head
4 x 10-32
Locking Nut
4 x 1/4"
Flat Washer
4 x 1/4-20
Slotted Screw
Pan Head
4 x 1/4-20
Locking Nut 4 x #10
Flat Washer
4 x 1/4"
Tooth Lock
Washer
4 x #10
Tooth Lock
Washer
FIGURE 1

PAGE OF
REV.
BUL87089
A
6
ASSEMBLY INSTRUCTIONS
6
INSTRUCTIONS DE MONTAGE
SDC
PRODUCT SERIES
SÉRIE DE PRODUIT
Main Protective Grounding
When grounding the rack system or enclosure it
is essential that the main protective ground is
connected and secured first with its own nut
before any bonding connections are made on
top. (Figure 2)
Bonding Connections
Accessories: To bond doors, panels, and rails to
the SDC unit follow the method from above and
connect the accessory bonding stud to one (1)
of the Permanent Earth Terminals (PET) on the
main body of the SDC
Bonding Connection
Protective Earth Ground
Figure 2
2
3
TOP VIEW
PET