HAMPTON BAY SB30 User manual

THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this base cabinet. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement
needs. Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
SINK BASE CABINET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #1006596139, 1006596130
Model #SB30, SB36

2
Table of Contents
Safety Information ..................................2
Warranty ..........................................2
Pre-Assembly ......................................3
Before You Begin ..................................3
Tools Required ....................................3
Hardware Included.................................3
Package Contents .................................4
Cabinet Assembly...................................5
Care and Cleaning .................................10
Safety Information
Please read and understand these instructions before you begin this
assembly.
CALIFORNIA RESIDENTS
WARNING: This product can expose you to chemicals
including Formaldehyde (GAS), which is [are] known to the
State of California to cause cancer. For more information go
to WWW.P65Warnings.ca.gov/products.
MINNESOTA RESIDENTS
IMPORTANT HEALTH NOTICE
SOME OF THE BUILDING MATERIALS USED IN THIS HOME (OR THESE
BUILDING MATERIALS) EMIT FORMALDEHYDE. EYE, NOSE, AND
THROAT IRRITATION, HEADACHE, NAUSEA AND A VARIETY OF ASTHMA-
LIKE SYMPTOMS, INCLUDING SHORTNESS OF BREATH, HAVE BEEN
REPORTED AS A RESULT OF FORMALDEHYDE EXPOSURE. ELDERLY
PERSONS AND YOUNG CHILDREN, AS WELL AS ANYONE WITH A
HISTORY OF ASTHMA, ALLERGIES, OR LUNG PROBLEMS, MAY BE AT
GREATER RISK. RESEARCH IS CONTINUING ON THE POSSIBLE LONG-
TERM EFFECTS OF EXPOSURE TO FORMALDEHYDE.
REDUCED VENTILATION MAY ALLOW FORMALDEHYDE AND OTHER
CONTAMINANTS TO ACCUMULATE IN THE INDOOR AIR. HIGH INDOOR
TEMPERATURES AND HUMIDITY RAISE FORMALDEHYDE LEVELS.
WHEN A HOME IS TO BE LOCATED IN AREAS SUBJECT TO EXTREME
SUMMER TEMPERATURES, AN AIR-CONDITIONING SYSTEM CAN BE
USED TO CONTROL INDOOR TEMPERATURE LEVELS. OTHER MEANS OF
CONTROLLED MECHANICAL VENTILATION CAN BE USED TO REDUCE
LEVELS OF FORMALDEHYDE AND OTHER INDOOR AIR CONTAMINANTS.
IF YOU HAVE ANY QUESTIONS REGARDING THE HEALTH EFFECTS
OF FORMALDEHYDE, CONSULT YOUR DOCTOR OR LOCAL HEALTH
DEPARTMENT.
Warranty
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
BEFORE YOU BEGIN
Compare all parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not assemble this
product. Contact Customer Service.
Assemble the cabinet on a soft surface such as carpet or the cardboard container of this product.
TOOLS REQUIRED
Phillips
screwdriver
Rubber
mallet
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC DD
Part Description Total Quantity Extras
AA Posts 17 1
BB #8 x 1 in. Screws (yellow) 40 14
CC Corner Locks 8 0
DD Silicone Pads 14 10

4
Pre-Assembly (continued)
PACKAGE CONTENTS
A
B
C
E
D
Part Description Quantity
A Back Panel 1
B Side Panels 2
C Face Frame 1
D Bottom Panel 1
E Toe Kick 1

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Cabinet Assembly
1 Attaching the posts to the panels
□Align four posts (AA) with pre-drilled holes on each of the panels and frame (A – C) and secure with four screws (BB) on each
panel and frame (A – C).
BB
AA
AB
C
AA
BB
2 Attaching the side panels into the face frame
□Start by placing the face frame (C) at on a smooth surface that will not scratch or damage the face of the cabinet, such as a
towel or piece of cardboard (1) from the packaging with the door facing down. Slide the two side panels (B) into the mating
grooves on the face frame (C).
B
B
CC
11

6
Cabinet Assembly (continued)
3 Attaching the bottom panel
□Slide the bottom panel (D) into grooves in the sides.
□Snap four corner locks (CC) over the posts to secure the face frame (C) and side panels (B) as shown. At the top of the cabinet,
the smooth face of each corner lock (CC) should be facing out.
NOTE: If installing a laminate countertop, the smooth face of each corner lock (CC) should be facing the inside of the cabinet.
D
C
B
AA
CC
CC
CC

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Cabinet Assembly (continued)
4 Attaching the back panel
□Assemble the back panel (A) and the four remaining corner locks (CC).
A
CC
CC
A
B
D
NOTE: If installing on a laminate countertop, orient the smooth face of each top corner lock (CC) in the opposite direction. Bottom corner
lock assembly will be the same for all countertop types.
□If installing a laminate countertop, the top four corner locks
(CC) should be oriented as shown below. From inside of
the cabinet, screw through the corner locks (CC) into the
bottom of the countertop to secure into place.
CC
□For all other countertop types, the top four corner locks(CC)
should look like this.
CC

8
Cabinet Assembly (continued)
5 Securing the bottom corner locks
□Insert a screw (BB) through each hole in the bottom four corner locks (CC), and screw into the bottom panels.
BB
CC
6 Attaching the toe kick
□Slide the toe kick (E) into the grooves of the side panels (B) so that it sits ush with the bottom of the cabinet.
□Insert two screws (BB) into the pocket holes to secure the toe kick (E) to the sides.
B
E
E
BB

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Cabinet Assembly (continued)
7 Securing the back and side panels
□Insert screws (BB) into countersunk holes in the back (A)
and side panels (B).
BB
B
A
BB
BB
8 Attaching silicone pads
□Peel and stick two silicone pads (DD) onto the inside
corners of each door.
DD

10
Cabinet Assembly (continued)
9 (OPTIONAL) Adjusting the door
□Door hinges are 6-way adjustable.
□Up or down adjustment – Loosen screw 1, align the door,
and tighten screw 1.
NOTE: It is critical that you do NOT overtighten screw 1.
□Left or right adjustment – Turn screw 2 clockwise or
counterclockwise.
□In or out adjustment – Turn screw 3 clockwise or
counterclockwise.
1
3
2
1 2 3
Care and Cleaning
□For normal spills, a damp cloth is sufcient. Dry the surface immediately.
□Doors can be cleaned with most general purpose household cleaners.
□Do not use caustic agents and/or abrasive scrubbers, or oven cleaners.
□Cabinets can be cleaned with a damp sponge or cloth using soapy water, or most general purpose household cleaners. Do not use any
abrasive cleaner or scrubbers.
□Do not allow liquids to remain on the surfaces for long periods of time.