HAMPTON BAY 281-585 User manual

Page 1
INSTRUCTION MANUAL
3LT Exterior Wall Lantern
The Home Depot Special Order (S/O) SKU 281-585 (UPC 6940500313269)
Stock SKU 276-510 (aged brass)
The Home Depot Special Order (S/O) SKU 282-936 (UPC 6940500313276)
Stock SKU 277-030 (oil rubbed bronze)

Page 2
Thank you for purchasing this Hampton Bay exterior wall lantern. This
product has been manufactured with the highest standards of safety and
quality. The finish of this lantern is weather resistant but over time will
naturally weather and fade.
FEATURES:
1. Three-light exterior wall lantern in aged brass finish (S/O SKU 281-585)
or oil rubbed bronze finish (S/O SKU 282-936) with clear seeded glass.
2. This fixture has been engineered to safely use three 60 watt candelabra
incandescent light bulbs (do not exceed 60 watts each) (not included).
3. For energy savings, this fixture has been engineered to safely use three
candelabra compact fluorescent light bulbs (for equivalent light output, do
not exceed 15 watts each) (not included).
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local The Home Depot, please call our Customer
Service Team at 1-877-527-0313 or visit www.homedepot.com. Please
reference your S/O SKU (281-585 aged brass fixture, 282-936 oil rubbed
bronze fixture) or UPC (6940500313269 aged brass fixture, 6940500313276
oil rubbed bronze fixture).

Page 3
CAUTION:
1. Before starting installation of this fixture or removal of a previous fixture,
disconnect the power by turning off the circuit breaker or by removing the
fuse at the fuse box.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY
ELECTRICAL QUESTIONS.
3. If you have any non-electrical questions about this fixture, please contact
our Customer Service Team at 1-877-527-0313 or visit
www.homedepot.com. Please reference your S/O SKU (281-585 aged brass
fixture, 282-936 oil rubbed bronze fixture) or UPC (6940500313269 aged
brass fixture, 6940500313276 oil rubbed bronze fixture).
4. Keep your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION
(not included):
3 Candelabra Light Bulbs Safety Goggles Ladder Gloves Wire Strippers
(60 watt maximum)
(or CFL equivalent)
Flathead Screwdriver Phillips Screwdriver Electrical Tape Wire Cutters Silicon Rubber Sealant
for exterior use

Page 4
PARTS INCLUDED FORASSEMBLY (parts are not to scale):
3ea Socket Sleeves (#6)
ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the fixture. Lay out all parts on a clean surface.
2. Before continuing Assembly, please proceed to the Installation Instructions.
3. Lift the Top Cover (#3). Place the three Socket Sleeves (#6) over the three
Sockets (#4).
4. Install three 60 watt candelabra incandescent light Bulbs (#5) (not included)
or three equivalent candelabra compact fluorescent light bulbs (not included)
in the three Sockets (#4) in the fixture.
5. Close the Top Cover (#3) onto the fixture frame.

Page 5
ASSEMBLY: