HAMPTON BAY YJAF-038G-Chili User manual

Model # YJAF-038G-Chili
YJAF-038G-Café
10 FT X 12 FT RECTANGULAR OFFSET UMBRELLA
THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improv
ually create
ement needs.
Thank you for choosing Hampton Bay!
Item # 1003 348 815
1003 348 766
USE AND CARE GUIDE
1-855-HD-HAMPTON
HAMPTONBAY.COM
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

2
Table of Contents
Table of Contents...................................................... . 2.
Warranty .................................................................... ..
What is Covered......................................................................
2
2
What is Not Covered................................................................ 2
Assembly.........................................................................5
Operation........................................................................
Care and Cleaning.........................................................
12
17
Pre-Assembly........................................................................... 3
Planning Assembly...................................................................
3
Hardware Included................................................................... 3
Package Contents...................................................................... 4
Warranty
Safety Information
PRODUCT CAUTION
This umbrella was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for
normal outdoor use; however, the manufacturer recommends storing and / or covering this umbrella when any formidable / severe weather
n the
product. Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is NOT
intended for commercial use and will void the warranty.
SAFETY WARNINGS
Safety Information ................................................................ 2
Product Caution ...
...................................................................
2
Safety Warnings ...................................................................... 2
WARNING: Please keep children out of the assembly area
before assembly.
WARNING: This umbrella unit is heavy, and may require
two adults for safe assembly.
CAUTION: Always close and secure the product when not
in use and in the event of inclement weather.
CAUTION: Never use the umbrella in high wind conditions.
Damage to the umbrella can occur.
!
!
CAUTION: Keep all flame and heat sources away from this
product at all times.
!
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
2 YEAR FRAME AND 2 YEAR FABRIC WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing, and abusive use. In addition, purchase parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
We warranty the frames to be free of manufacturing defects to the original purchaser for two years, and a two year limited warranty for the fabric.

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
Part Description Quantity
BB M10x20 combination bolt
M10x25 combination bolt
4+1
CC M6x15 bolt 1+1
DD M6x10 bolt 1+1
EE M6 hex wrench 1
FF
M10 hex wrench 1
AA 4+1
AA
BB CC DD
FF
NOTE: More than one person may be required to
assemble this product.
NOTE: Hardware not shown to actual size.
HARDWARE INCLUDED
EE
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

4
Pre-Assembly (continued)
Part Description Quantity
1
1
1
D Upper base cover 1
E Lower base cover 1
F Pedal 1
A
B
C
Lower bracket
Upper bracket
Base tube
1
2
2
1
J Crank
K Umbrella shade 1
G
H
I
Turn plate
Side base
Middle base
PACKAGE CONTENTS
B
A
F
E
D
G
H
CI
I
H
J
K

5
Assembly
1Pouring Sand and Water into the Bases
Open the side bases (H) and the middle bases (I) in the counterclockwise direction.
Pour sand and water into the side bases (H) and the middle bases (I).
Close the side bases (H) and the middle bases (I) in the clockwise direction.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
SAND
OPEN
WATER
CLOSE
NOTE: For proper stability of the offset umbrella, please place 330.69 lb/150 kg
in total of water and sand into the bases, or place at least 220.46 lb/100 kg
total of water into the bases.
NOTE: Place the bases in the area where the umbrella
is to be used. The umbrella will be very heavy after
filled with sand and water.
NOTE: The bases are OK to be filled with sand and
water, or just can be filled with water.

6
Assembly (continued)
2Attaching the Brackets
Attach the upper bracket (B) onto the lower bracket (A).
B
A

7
Assembly (continued)
3Attaching the Turn Plate to the Brackets and Base Tube to the Turn Plate
Attach the pedal (F) to the turn plate(G) using M6x10 bolt (DD) and the M6 hex wrench (EE).
Attach the turn plate (G) to thebrackets (A & B) using M10x20 combination bolts (BB) and the M10 hex wrench (FF).
ehtot)C(ebutesabehthcattA turn plate (G) using M10x25combination bolts (AA) and the M10 hex wrench (FF).
FF
B
G
EE
F
CBB
DD
FF
AA
G
A
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Fully tighten all the bolts at this step.

Assembly (continued)
8
4
Attaching the Middle Bases to the Brackets
Attach the middle bases (I) onto the brackets (A & B).
I
B
A

Assembly (continued)
9
5Attaching the Side Bases to the Brackets
Attach the side bases (H) to the bracket (A & B).
H
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
B
A

Assembly (continued)
10
6Inserting the Lower Base Cover and the Upper Base Cover into the Base
Tube
Insert the lower base cover (E) and the upper base cover (D) into the base tube (C).
C
D
E