HAMPTON BAY 176-411-5FP-V2 User manual

THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
OAK CLIFF 5-PIECE PATIO FIRE PIT CONVERSATION SET
(Box 1 of 3: Two Chairs)
1-855-HD-HAMPTON
HAMPTONBAY.COM
Model #176-411-5FP-V2
this 5 piece set. We strive to continually create
Item # 742 481
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8.00 a.m. - 7.00 p.m. EST, Monday - Friday,
9.00 a.m. - 6.00 p.m. EST, Saturday

2
Table of Contents
Safety Information
:Please keep children out of the assembly area
during assembly.
IMPORTANT: Please check the tightness of the bolts at
least every 90 days.
Warranty
2 YEAR FRAME / 2 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
r two years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Table of Contents........................................................2
Safety Information.......................................................2
Warranty ......................................................................2
2 Year Frame and Fabric
Pre-Assembly...............................................................3
Planning Assembly.................................................................... 3
Hardware Included.................................................................. 3
Package Contents ....................................................................4
Assembly ....................................................................5
...................2
Limited Warranty............
................................................................2
What Is Covered
What Is Not Covered ................................................................2..
.... ..
Care Instructions.... ................................................................2..
You may contact our customer service department with any questions by phone at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Care Instructions
Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. Treat frame with one step liquid wax for maximum protection against
UV light and salty, damp air. When not in use, store furniture in a cool, dry place. If your set includes cushions, they may be cleaned by hand
with a mild solution of soap and water. Rinse cushion thoroughly and allow to drip dry. Do not machine wash or tumble dry, as cushions
may shrink. Do not use bleach or solvents on fabrics.
WARNING: The chair will fall if over-rocking.
The chair will make noise if bolts are not fully tightened.
CAUTION: Use the chairs on flat ground only.
CAUTION
two years

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
It will take two people about 20 minutes to complete the assembly process.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA
Washer (M6)
16
BB Bolt (M6x30) 8
CC
16
DD
Bolt cap (M6)
8
Bolt cap (M8) 16 EE
KK
Part Description Quantity
Bolt (M6x35)
FF 8
GG 8
HH Washer (M8) 16
Bolt (M8x40)
II Nut (M8) 8
Nut cap (M8) 16
JJ
T-rock
KK 4
LL 2
MM
Hex wrench 1
Lock washer (M8)
NN Spanner 2
LL NN
MM
Washer plate
AA BB CC DD EE
FF GG HH II JJ

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Back panel 2
B Seat panel 2
A
B
C Right armrest 2
D Left armrest 2
E Chair base
2
C
D
E
F
G Seat cushion
Back cushion 2
2
F
G

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1 Attaching armrests to the seat panel
2 Attaching the back panel
□Identify the front side and the rear side of the seat panel (B).
□Attach armrests (C) and (D) to the seat panel (B) with washers (DD)
and bolts (BB) using hex wrench (MM). (Fig.1)
□Attach the back panel (A) to armrests (C) and (D) with washers (DD)
and bolts (CC) using hex wrench (MM). (Fig. 2)
□Fully tighten all bolts (CC) and (BB) once all bolts are in place.
□Cover bolts (CC) and (BB) with bolt caps (AA). (Fig.1 & Fig. 2)
FRONT SIDE
REAR SIDE
B
AA
BB
DD
B
C
D
IMPORTANT: Do not fully tighten bolts until the end of
Step 2.
Fig. 1
Fig. 2
A
A
CC
D
A
D