HAMPTON BAY 074-CL-2PK-Y User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this chaise. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
GRAY WICKER OUTDOOR PATIO CHAISE LOUNGE WITH
RIVERBED SLING FABRIC (2-PACK)
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #1007 494 921
Model #074-CL-2PK-Y

Table of Contents
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons :
WARNING : Keep your fingers clear while switching
the positions of the chaise lounge back.CAUTION : Use this chaise lounge on the flat ground only.
Warranty
THIS IS A RESIDENTIAL WARRANTY ONLY AND DOES NOT APPLY TO COMMERCIAL USE
3 YEAR FRAME AND FABRIC LIMITED WARRANTY
2 YEAR WEAVE LIMITED WARRANTY
WHAT IS COVERED
We warrant the frame and the fabric to be free of manufacturing defects to the original purchaser for three years and the weave for two
years.
WHAT IS NOT COVERED
It remains the customer's responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing, and abusive use. In addition, purchased parts are not covered under this
warranty. We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
For a copy of our full limited warranty, please contact our customer service team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
2
Table of Contents ...................................2
Warranty ..........................................2
What is Covered ...................................2
What is not Covered ................................2
Pre-Assembly. .................................. ..3
Planning Assembly ............................. ..3
Hardware Included ................................3
Package Contents .................................3
Assembly ...................................... ..4
Care and Clea.ning ............................. . . . . . 7
□Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
□Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the
manufacturer.
□Do not move the chaise lounge chair while it is occupied. Failure
to obey this caution could result in injury.
Important Safety Instructions
................................. . 2
Important Safety Instructions

3HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
HARDWARE INCLUDED
NOTE : Hardware not shown to actual size.
Part Description Quantity
AA Bolt (M6*32) 16
BB Bolt (M6*20) 52
CC Washer 68
_DD
Plastic washer 4
_FF
_AA _BB _CC
DD
_EE _GG
PACKAGE CONTENTS
Part Description Quantity
ABack panel 2
BLeft leg 2
CRight leg 2
DCross panel 2
Part Description Quantity
EE Bolt cap 68
Hex wrench 1
GG Connecting plate 8
FF
Part Description Quantity
EE 2
FF Supported leg 2
GSupported Bar 2
HCross panel with brand badging 2
Seat panel
BCD
A
EFGH
□Please read this entire instruction manual prior to assembly.
□Verify all parts packed in the carton against the parts list.
□Remove all protective materials and place the parts on a non-abrasive surface to avoid scratching.
□It will take two people about 30 minutes to complete the assembly process.

4
Attaching the seat panel to the left leg
□Place the left leg (B) of the chaise lounge on a flat, smooth
surface.
□Align the seat panel (E) to the left leg (B), and attach them
with the washers (CC) and the bolts (AA) using the hex
wrench (FF).
2Attaching the supported leg and the
supported bar to the left leg
□Align the supported leg (F) to the left leg (B), and attach
them with the washers (CC) and the bolts (BB) using the
hex wrench (FF). (Fig. 2.1)
□Align the supported bar (G) to the left leg (B), and attach
them with the washers (CC) and the bolts (BB) using the
hex wrench (FF). (Fig. 2.2)
AA
CC
F
E
B
CC
Fig. 2.2
B
G
BB
CC
Fig. 2.1
BB
3Attaching the cross panel and the cross panel with brand badging to the left leg
□Align the cross panel (D) and the cross panel with brand badging (H) to the left leg (B), and attach them with the connecting
plates (GG), the washers (CC) and the bolts (BB) using the hex wrench (FF). (Fig. 3.1)
BB
CC
B
D
H
Fig. 3.1
GG
Assembly
1
IMPORTANT : For steps 1 to 5, don't fully tighten
bolts until the end of step 6.
IMPORTANT : The brand badging shall face outside
and be at the bottom of the cross panel. (Fig. 3.2)
Fig. 3.2

5
Assembly
Attaching the right leg to the
supported leg and the supported bar
□Align the supported leg (F) to the right leg (C), and attach
them with the washers (CC) and the bolts (BB) using the
hex wrench (FF). (Fig. 2.1)
□Align the supported bar (G) to the right leg (C), and attach
them with the washers (CC) and the bolts (BB) using the
hex wrench (FF). (Fig. 2.2)
5
C
FBB
CC
Fig. 2.1
G
Fig. 2.2
4Attaching the right leg to the seat
panel
□Place the right leg (C) of the chaise lounge on a flat,
smooth surface.
□Align the seat panel (E) to the right leg (C), and attach
them with the washers (CC) and the bolts (AA) using
the hex wrench (FF).
E
AA
CC
C
Attaching the cross panel and the cross panel with brand badging to the right leg
□Align the cross panel (D) and the cross panel with brand badging (H) to the right leg (C), and attach them with the connecting
plates (GG), the washers (CC) and the bolts (BB) using the hex wrench (FF). (Fig.6.1)
□Fully tighten all the bolts (AA) and bolts (BB), and cover them with bolt caps (EE).
6
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
AA
EE
H
GG
EE
BB
CC
D
C
IMPORTANT : The brand badging shall face outside
and be at the bottom of the cross panel. (Fig. 6.2)
Fig. 6.2
Fig. 6.1
BB
CC

6
Assembly
Attaching the back panel to the right
leg and the left leg
□Align the back panel (A) to the right leg (C), and attach
them with the plastic washer (DD), the washer (CC) and
the bolt (BB) using the hex wrench (FF).
□Align the back panel (A) to the left leg (B), and attach
them with the plastic washer (DD), the washer (CC) and
the bolt (BB) using the hex wrench (FF).
□Fully tighten all the bolts (BB), and cover them with the
bolt caps (EE).
Leveling the chaise lounge
□Place the lounge on flat ground. When necessary, level the
chaise lounge with foot glides at the bottom of chaise
lounge.
NOTE : You can lock the chaise back in three different
positions.
8
7
C
B
A
EE
BB
CC
DD
WARNING : Never try to adjust the chaise back while
sitting on the chaise.
IMPORTANT :Before using the chaise lounge, the
back panel must be firmly locked in place.

7
Care and Cleaning
□Do not allow water to build up in the frames. This will cause corrosion and possible freezing damage in cold climates.
□Use a mild soap and water for normal cleaning. Do not use janitorial or alcohol based cleaners. Some cleaners may be marked as
natural, but some ingredients may cause discoloration or have an adverse reaction to your finish.
□Rinse with clean water and dry with a soft, absorbent cloth towel.
□Treat the frames with a liquid wax for maximum protection against UV rays and / or salty, damp air.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
For certification use only
Factory chaise lounge model #LLAT0580