HAMPTON BAY Crestridge Padded Sling Glider RTS019N User manual

THANK YOU
y through the purchase of this dining set. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
1003159681
Model RTS019N
USE AND CARE GUIDE
Crestridge Padded Sling Glider - Taupe Putty
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
HAMPTONBAY.COM
1-855-HD-HAMPTON

2
Table of Contents
Warranty ........................................................................2
What is Covered ...................................................................... 2
What is Not Covered ................................................................ 2
Planning Assembly .................................................................. 3
Hardware Included .................................................................. 3
Warranty
2 YEAR FRAME AND 2 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for two years, and a two year limited warranty for the fabric.
WHAT IS NOT COVERED
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Safety Informat oni
PRODUCT CAUTION
This set was made for the explicit purpose ofproviding outdoor functions and is not to be used as a toy. This productis intended fornormal
outdoor use; however, the manufacturer recommends storing and / or covering this set when any formidable/ severe weather is approaching.
hildren under
the age of 10, near the product, should be supervised by a competent adult at all times.
SAFETY WARNINGS
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty. We
reserve theright to make substitutions with similar merchandise, if the model in question is no longer in production.
Safety Information .......................................................2
ProductCaution .................................................................... 2
WARNING: Weight limit for the glider is 250 lb (113.39 kg)
for each seat.
WARNING: Please keep children out of the assembly
area before assembly.
Safety Warnings .................................................................... 2
Table of Contents..........................................................2
Pre-Assembly ................................................................3
Glider Package Contents..........................................................4
Care and Cleaning........................................................ 10
Glider Assembly............................................................ 5
WARRANTY PRINTED IN THE MANUAL IS NOT VALID FOR USA.
WARNING: Do not place heavy objects on the glider.
CAUTION: When not in use, secure the product in a cool
and covered location.
!

3
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to
assemble this product.
HARDWARE INCLUDED
NOTE: Hardware notshown to actual size.
AA M6x16 BOLT
BB
CC
DD
EE
FF
GG
HH
II
JJ
AA BB
FF
EE
GG HH II JJ
CC DD
Part
Description Quantity
6+1
M6xP1.0 PLASTIC NUT
2+1 M8x35 BOLT
d6.5xD13x1.0 WASHER
24+2
2+1
4+1
4+1
M6x30 BOLT
M6x55 BOLT
d8.5xD17x1.6 WASHER
2+1
4 mm ALLEN KEY WRENCH
6 mm ALLEN KEY WRENCH
1
1
1
10 & 13 mm NUT WRENCH
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

4
Pre-Assembly (continued)
GLIDER PACKAGE CONTENTS
E
A
D
Part Description Quantity
ARight Arm 1
1
1
1
1
BLeft Arm
C Cross Brace
D Bottom Frame
E Seat Assembly
C
B

l
5
Glider Assembly
1
Insert the right and left arms (A and B) into the cross brace (C) on both sides.
Fasten them together by using M6x30 bolts (BB), d6.5xD13x1.0 washers (EE), and M6xP1.0 plastic nuts (GG).
Connecting the glider cross brace to the glider arms
L
R
A
CB
BB
EE
GG
EE
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Loosely tighten all the bolts using the hex wrenches (HH and JJ).NOTE:

l
6
Glider Assembly (continued)
2Connecting the glider bottom frame to the glider arms
Place the arm assembly on to the bottom frame (D).
FRONT
HIGHER
TUBE
Make sure that the higher tube on the bottom frame (D) is facing the front of the glider.
A
D
B
Front
Front

l
7
Glider Assembly (continued)
3Connecting the glider arms to the glider bottom frame
Loosely tighten all the bolts using the hex wrenches (HH and JJ).NOTE:
Fasten the swing bars of the arm assembly to the bottom frame (D) by using M6x55 bolts (CC), d6.5xD13x1.0 washers (EE),
and M6xP1.0 plastic nuts (GG).
A
B
D
CC
CC
EE
EE
EE
GG
EE
GG
EE
EE
EE
EE
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

l
8
4Connecting the glider seat assembly to the glider arms
At the front of the glider, fasten the seat assembly (E) to the arms (A and B) by using M6x16 bolts (AA) and d6.5xD13x1.0 washers (EE).
Loosely tighten all the bolts using the hex wrench (HH).NOTE:
B
E
A
AA
AA
EE
EE
Glider Assembly (continued)

l
9
Glider Assembly (continued)
5
Connecting the glider seat assembly to the glider arms
Fasten the seat assembly (E) to the right and left arms (A and B) by using M8x35 bolts (DD) and d8.5xD17x1.6 washers (FF).
NOTE: Loosely tighten all the bolts using the hex wrench (II).
E
A
B
FF
DD
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

6
l
10
Tightening the bolts
Glider Assembly (continued)
Care and Cleaning
For best results, clean the set with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach, or solvents.
Store the set in a dry, sheltered place when not in use.
Keep the set away from re, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet,
snow, or wind.
Turn the glider to its upright position.
Once all of the bolts are in place, fully tighten the bolts.
Ensure all connections are secure before use.

Questions,problems,missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. - 7 p.m.,EST, Monday - Friday, 9 a.m. - 6 p.m.,EST, Saturday
Retain this manual for future use.
1-855-HD-HAMPTON
HAMPTONBAY.COM