HAMPTON BAY YJAF-037-E User manual

8 FT. SQUARE OFFSET NON-SOLAR UMBRELLA
THANK YOU
We appreciate the trust and con dence you have placed in Hampton Bay through the purchase of this umbrella. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service.
8 a.m. -7p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #1003 489 387
1003 514 173
1003 514 165
Model #YJAF-037-E
YJAF-037-PU
YJAF-037-MI

Table of contents .................................................................2
Safety Information ...............................................................2
Product Caution ........................................................................2
Safety Warnings ........................................................................2
Warranty...................................................................................2
What is covered ........................................................................2
What is not covered ..................................................................2
Pre-assembly ..........................................................................3
Planning assembly ....................................................................3
Hardware included ....................................................................3
Packaging contents ...................................................................4
Assembly................................................................................ 5
operations............................................................................19
Care and Cleaning ................................................................26
2
Warranty
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.
1 YEAR LIMITED WARRANTY
WHAT IS COVERED
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial
We reserve the right
to make substitutions with similar merchandise, if the model in question is no longer in production.
We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for one year.
Safety Information
PRODUCT CAUTION
SAFETY WARNINGS
This umbrella was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product isintended for
normal outdoor use; however, the manufacturer recommends storing and / or covering this umbrella when any formidable / severe weather is
he product.
Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is NOT intended for
commercial use and will void the warranty.
WARNING: Please keep children out of the assembly area
before assembly.
CAUTION:
a
!
CAUTION: Do not locate the product near any heat source.
!
CAUTION: When not in use, secure the product in a cool
and covered location.
!
CAUTION: Always close and secure the product when
not in use.
!
CAUTION: Never use the umbrellain high wind conditions.
Damage to the umbrellacan occur.
!
CAUTION: Umbrella should not be used in the event of wind,
rain, hail, sleet, snow or any other inclement weather.
Table of Contents

AA BB
AA
BB
M8x20 combination hex bolt
Wrench
4+1
1
3
Pre-Assembly
Part Description Quantity
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
PLANNING ASSEMBLY
NOTE: More than one person may be required to
assemble this product.
NOTE: Hardware not shown to actual size.
HARDWARE INCLUDED

4
B
C
Upper bracket
Lower umbrella pole
1
1
DCrank 1
EUmbrella shade 1
FMiddleumbrella pole 1
GLower base cover 2
HSide panel
Lock panel
2
I
Supporttube rim
2
J
Upper base cover
1
K
Corner connector
1
L
Sand bag
4
M 1
PartDescriptionQuantity
ALower bracket 1
Pre-Assembly (continued)
PACKAGE CONTENTS
E
D
F
K
J
G
HLLBA
I
L
H
L
G
I
C
M
M

1
5
Attach the upper bracket (B) ontothelower bracket (A).
ATTACHING THE BRACKETS
Assembly
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE : This umbrellashould besetup in its desired location to avoid moving it after assembly.
B
A

2
Separate the middleumbrellapole (F) from the lower umbrella pole(C) by rotating the locking knob 180 degrees
clockwise, as shown below.
SEPARATING THE MIDDLE UMBRELLA POLE FROM THE LOWER UMBRELLA POLE
Assembly (continued)
6
C
F

3
ATTACHING THE LOWER UMBRELLA POLE TO THE BRACKETS
Attach the lower umbrellapole (C) totheupper bracket (B) and the lower bracket (A) using M8x20 combination hex bolts (AA).
Assembly (continued)
NOTE : Fully tighten the boltsusing the hex wrench (BB).
7HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
C
AA
BB
B
A
AA

4
INSERTING THE CORNER CONNECTORS
Insert the corner connectors (L) into the four ends of the assembled brackets.
Assembly (continued)
8
L

5SLIDING THE LOCK PANELS
Slide the perforated lock panels (I) downward between the corner connectors (L).
Slide the support tube rims (J) down the lower umbrella pole (C) and connect it to the brackets (A & B).
Assembly (continued)
9HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
JI
I
A& B
C

6SLIDING THE SIDE PANELS
Slide the side panels (H) downward between the corner connectors (L).
Assembly (continued)
10
H
H
LL

7PLACING THE SAND BAGS
Place the sand bags (M) in the umbrella base.
Assembly (continued)
11 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE : Place the base in the area where the umbrella to be used. The umbrella will be very
M

8FILLING THE SAND BAGS
Pull to open the velcro pouch on the sand bag (M) and fill with sand.
After filling the sand bags (M), close the pouch and ensure the velcro is sealed.
Lock the two sections of the sand bags (M) together.
Assembly (continued)
12
NOTE : The sand bags (M) are to be filled with sand only.
NOTE : For proper stability of the offset umbrella, please place 89 lbs. of sand into each sand bag for a total of 178 lbs.
M

9ENSURING THE LOCKING MECHANISM IS IN THE OPEN POSITION
Ensure the locking mechanism on the lock panel (I) is in the OPEN position by using the wrench (BB) as shown in figure 1.
Ensure the locking mechanism on the lower base cover (G) is in the OPEN position by using the wrench (BB) as shown in figure 2.
Attach the lower base cover (G) to the side panels (H).
Close the lower base cover (G) and ensure they are fully closed.
Assembly (continued)
13 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
G
BB
OPEN CLOSED
OPEN CLOSED
Figure 1
Figure 2
I
H

Assembly (continued)
10 LOCKING THE LOWER BASE COVER
Lock the lower base cover (G) and the lock panel (I) by turning the locking mechanisms to the CLOSE position using the
wrench (BB) as shown in figure 1 and figure 2.
Attach the upper base cover (K) to the assembled base.
14
OPEN CLOSED
BB
K
OPEN CLOSED
Figure 1 Figure 2
I

Assembly (continued)
11 ASSEMBLING THE UMBRELLA SHADE
Align the holes, hold down the tabs on the pins and insert the tube to another tube until the two pieces snap into place.
15 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
E

Assembly (continued)
12 ATTACHING THE UMBRELLA SHADE TO THE MIDDLE UMBRELLA POLE
Holding down the pins on the middle umbrella pole (F).
Insert the middle umbrella pole (F) into the umbrella shade (E) until it snaps into place, as shown below.
16
NOTE : Align the holes on the middle umbrella pole (F)
F
E
before releasing the pins to secure.

Assembly (continued)
13 INSERTING THE UMBRELLA SHADE INTO THE LOWER UMBRELLA POLE
Rotate the locking knob 180 degrees clockwise as shown in figure 1.
Insert the umbrella shade (E) into the lower umbrella pole (C) as shown in figure 2.
Rotate the locking knob 180 degrees clockwise as shown in figure 3.
17 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE : : If there is a gap in the locking knob as shown below in figure 3, please rotate the umbrella shade (E) until it is
completely locked as shown in figure 4
E
C
Figure 1
Figure 2 Figure 3
Figure 4

14
ATTACHING THE CRANK
Attach the crank (D) to the handle, details see operation 1.
Assembly (continued)
18
D

1ATTACHING THE CRANK
Attach the crank (D) to the handle as shown in figure 1.
Attach the crank (D) by aligning the tap with the hole on the crank (D) until it snaps into place.
To detach the crank, any properly sized tool is required to press the tap to take the crank (D) out.
Attach the crank (D) without using the tap as shown in figure 2.
To detach the crank (D), just take the crank out.
Operation
19 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
NOTE : Both methods ofattaching the crank (D) are acceptable.
Figure 1
Figure 2
D
D

2RAISING THE UMBRELLA
Loosen the knob on the umbrella shade as shown in figure 1 by turning it counterclockwise until it is fully loose.
Hold the umbrella handle and push the long bent tube upward as shown in figure 2 until it stops and the umbrella is fully extended.
Fully tighten the knob on the umbrella shade clockwise as shown in figure 3 to lock the handle in place.
Shake the canopy to separate with the umbrella ribs.
Operation (continued)
20
Figure 1
Figure 2
Figure 3