Handheld-Wireless H901 Installation guide

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [email protected]om Web: www.hhw9.com
H901Quick Manual

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [email protected]om Web: www.hhw9.com
Declaration
2010 by Shenzhen Handheld-Wireless Technology Co., Ltd. All rights reserved.
No part of this publication may be reproduced or used in any form, or by any electrical or mechanical
means, without permission written from Handheld-Wireless. This includes electronic or mechanical
means, including photocopying, recording, or information storage and retrieval systems. The material in
this manual is subject to change without notice.
The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user
is on a licensed basis. Handheld-Wireless grants to the user a non-transferable and non-exclusive
license to use each software or firmware program delivered hereunder (licensed program). Except as
noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without
prior written consent of Handheld-Wireless. No right to copy a licensed program in whole or in part is
granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any
form or portion of a licensed program with other program material, create a derivative work from a
licensed program, or use a licensed program in a network without written permission from
Handheld-Wireless.
Handheld-Wireless reserves the right to make changes to any software or product to improve reliability,
function, or design.
Handheld-Wireless does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any
Handheld-Wireless intellectual property rights. An implied license only exists for equipment, circuits, and
subsystems contained in Handheld-Wireless products.

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [email protected]om Web: www.hhw9.com
PART 1 OVERVIEW
1.1 Specifications
Please refer to Table 1-1 about standard hardware configuration and specifications.
SPECIFICATIONS
PHYSICAL CHARACTERISTICS
Dimension
148mm(H)x77.5mm(W)x27mm(D)±2 mm
Weight
Net Weight :300g (including battery&wrist strap)
Display
4.3 in. TFT-LCD(WVGA 480x800)touch screen with backlight
Backlight
LED backlight
Keypads
3 TP keys, 6 function keys,3 side buttons
Expansions
2 PSAM, 1 SIM, 1 TF
Battery
Rechargeable li-ion polymer, 3.7V, 4100mAh
PERFORMANCE CHARACTERSTICS
CPU
Cortex A7 1.2GHz dual-core
Operating
System
Android 4.4.2
Storage
1GB RAM, 4GB ROM, MicroSD(max 32GB expansion)
USER ENVIRONMENT
Operating
Temp.
-20℃to 50℃
Storage
Temp.
-20℃to 70℃
Humidity
5%RH to 95%RH(non-condensing)
Drop
Specification
s
5ft./1.5 m drop to concrete across the operating temperature range
Sealing
IP65, IEC compliance
ESD
±15kv air discharge, ±8kv direct discharge, ±8kv indirect discharge
DEVELOPMENT ENVIRONMENT
SDK
HHW Software Development Kit
Language
Java
Environment
Android Studio or Eclipse
DATA COMMUNICATION
WWAN
WCDMA(850/1900/2100MHz), GSM/GPRS/Edge 850/900/1800/1900MHz)
WLAN
IEEE 802.11 b/g/n
WPAN
Bluetooth Class v2.1+EDR, Bluetooth v3.0+HS, Bluetooth v4.0
GPS
GPS(embedded A-GPS), accuracy of 5 m
DATA CAPTUER

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [email protected]om Web: www.hhw9.com
BARCODE READER(OPTIONAL)
1D barcode
1D laser engine
Honeywell N431x
Symbologies
All major 1D barcodes
2D barcode
2DCMOSImager
Symbol SE4500
Symbologies
PDF417, MicroPDF417, Composite, RSS, TLC-39,
Datamatrix, QR code, Micro QR code, Aztec, MaxiCode,
Postal Codes, US PostNet, US Planet, UK Postal,
Australian Postal, Japan Postal, Dutch Postal. etc.
COLOR CAMERA
Resolution
5.0 megapixel
Lens
Auto-focus with LED flash
RFID READER(OPTIONAL)
RFID LF
Frequency
125KHz/134.2KHz(FDX-B/HDX)
Protocol
ISO 11784&11785
R/W Range
2cm to 10 cm
RFID HF
Frequency
13.56MHz
Protocol
ISO 14443A&15693
R/W Range
2cm to 8cm
RFID UHF
Frequency
865~868MHz or 920~925MHz
Protocol
EPC C1 GEN2/ISO 18000-6C
Antenna Gain
Circular antenna(2dBi)
R/W Range
1 m to 1.5 m(tags and environment dependant)
Active
2.45GHz
Read range more than 200 m
433MHz
Read range more than 200 m
ZigBee READER(OPTIONAL)
Protocol
IEEE 802.15.4
Reading
Range
100 m to 200 m
FINGERPRINT READER(OPTIONAL)
Sensor
FPC 1011
Sensor type
Capacitive, area sensor
Resolution
508 DPI
Performance
FRR<0.008%, FAR<0.005%
Capacity
1000
PSAM SECURITY(OPTIONAL)
Protocol
ISO 7816

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [email protected]om Web: www.hhw9.com
Baudrate
9600, 19200, 38400,43000, 56000, 57600, 115200
Slot
2 slots(maximum)
ACCESSORIES
Standard
1xPower Supply
1xLithium Polymer Battery
1xDC charging cable
1xUSB data cable
1.2 Features and Structure
1.3 Battery Installation
1. Unlock the battery lockers on the right side and left side;
2. Remove the battery cover and insert the battery properly to ensure the connections between
the battery with the battery pins;
Reserved Button
Power Button
Reserved Button
LED
Return Button
Main Menu
Menu
Camera
Battery Locker
Barcode Scan Window
RFID Sensor Zone
Speaker

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [email protected]om Web: www.hhw9.com
3. Install the battery cover and lock the lockers slightly;
1.4 Battery Charging
1. Use the power adapter to charge properly within the authorized voltage range;
2. Connect the tablet with PC to via USB cable;
3. Red LED indicates charging, and it would be green when the battery is fully charged;
1.5 TF Card Installation
1. Shutdown the device and unlock the battery lockers;
2. Remove the battery properly;
3. Insert the TF card into the slot and lock it slightly;
4. Install the TF card rubber cap slightly;

Shenzhen Handheld-Wireless Technology Co., Ltd
Add: 1621-1630, Block B, Dongfangtiande Bldg., Minzhi Street, Longhua New District, Shenzhen, China, 518313
Tel: [phone] Fax: [phone] Email: [email protected]om Web: www.hhw9.com
PART 2 BASIC OPERATION
1.1Wake up and Shutdown
1. Wake up
System would enter standby mode automatically after the default 1 minute idle status, or we
can press the power button to enter the standby mode forcedly; For tablets in standby mode,
please the power button slightly to wake it up;
2. Shutdown
Press the power button for seconds and select the option of „Power off‟ to shutdown the
terminal. Please save the data before shutting down the system, otherwise the unsaved data
would be lost;