Hangman No Stud TV Hanger User manual
STEP 2: INSTALL WALL BRACKET
Hold the wall bracket in place and install center nail rst. This will allow you to easily adjust the bracket rotation.
Insert level into slot and make sure it is level before installing the remaining nails.
STEP 3: HANG TV AND INSTALL SECURITY CABLE
Hang TV by engaging the TV bracket on top of the wall bracket, assuring the brackets have engaged correctly. (See below)
(Each nail holds 10 lbs.)
Slide level into slot.
W
A
L
L
Wall Wall
Correct Incorrect
STEP 1: INSTALL TV MOUNTING BRACKET
Place the TV face down on a soft surface where it is secure and stable. If your TV is
already attached to a base, it must be removed before beginning the installation.
The VESA holes on the back of the TV are either 4mm, 5mm, 6mm, 8mm depending
on the brand of the TV. This kit includes all sizes.
For Installation in Drywall
For other wall types please use our Simple Mount TV Hanger (S2060-SF).
DO NOT USE THESE HOLES
USE TOP HOLES ONLY
TV can be tilted away
from wall for cable access.
Attach TV mounting bracket to the top 2 holes using the
appropriate bolts. This kit also includes different lengths
of each size. Hand tighten to choose appropriate length
then use a handheld Phillips screwdriver and tighten
until snug.
Do not overtighten.
IMPORTANT
TOO SHORT
USE WASHERS IF BOLTS
ARE TOO LONG
CORRECT
TOO LONG
Insert Cable through the slot on the bracket.
Security Cable Installation
Hang TV and insert BearClaw security screw through the eyelet and into the wall.
