HanleyLED HLED-RGBCNTRL User manual

HanleyLED HLED-RGBCNTRL Spec Sheet
HanleyLED HLED-RGBCNTRL Spec Sheet
06.5.18
Remote Control Operating Instruction:
Operating Instructions for Receiver:
Indicator Light LED lamp connection socket
R RGB Control - Remote M7G B V+ Remote ID learning button
Power Input Socket
-This product is non-waterproof. Please avoid the sun and rain.When installed
outdoors, ensure it is mounted in a water proof enclosure.
- Good heat dissipation will prolong working life of the controller. Please ensure
good ventilation with each installation.
Color Shortcut
Mode Shortcut
RGB Brightness +/-
On/O
Speed/Brightness +/-
Loop Play
Color-save
(Press 25 and save)
COLOR
CHANGING MODES
1. Static Red
2. Static Green
3. Static Blue
4. StaticYellow
5. Static Purple
6. Static Cyan
7. StaticWhite
8. RGB Skipping
9. 7 Colors Skipping
10. RGB Smooth
11. Full-color Smooth
Bottom Section
This portion is to save solid colors. Use the arrows to
formulate the exact color you want. Once you have the
desired color simply hold down a number to save that color
for future use. You can save up to 6 custom solid colors.
Top Section
To customize the“Jump”feature or the“Fade”feature use
the (+) or (-) buttons to increase or decrease the“Jump”
or“Fade”.This automatically saves after you choose the
desired speed of your selected feature.
www.hanleyledsolutions.com Your Local Distributor: Grimco
US www.grimco.com • 800.542.9941 | Canada www.grimco.ca • 800.263.1421 | International 305.885.0088
Specications
Model
Power Input
Max Current Load
Max Output Power
Working Temp.
Dimensions
Weight
Total Weight (G.W.)
M3-3A
12 ~ 24vDC
3Ax3CH
108W(12V)/216W(24W)
-30 ~ 55 °C / -22° ~ +131 °F
L135 xW30 x H20(mm)
47g
135g
RECEIVER
Model
Working Voltage
Working Frequency
Remote Distance
Working Temp.
Dimensions
Weight (N.W.)
M7
3V (battery CR2032)
433.92 MHz
30m
-30 ~ 55 °C / -22° ~ +131 °F
L104 xW58 x H9(mm)
42g
REMOTE
RGB Controller
HLED-RGBCNTRL
Attention
Features
- RF remote is slim, light and easy to carry while receiver is small and easy to install.
- High grayscale performance.
- One receiver has the capability to dim, change color temperature and control RGB.
- Remote can automatically enter standby mode to extend battery life.
Automatic sleep mode, after 30 seconds.
- Remote can be used up to 90ft away from the receiver.
- HanleyLED recommends underloading by 5%.
5(EMC, R&TTE)
RF WIRELESS

RF Remote Remote Holder
www.hanleyledsolutions.com Your Local Distributor: Grimco
US www.grimco.com • 800.542.9941 | Canada www.grimco.ca • 800.263.1421 | International 305.885.0088
Product Drawings
Receiver
Wiring Diagram
HanleyLED HLED-RGBCNTRL Spec Sheet
HanleyLED HLED-RGBCNTRL Spec Sheet
Application of RGB Modules
Click
to Play