Hanover FSSTJK025A-OR2 User manual

1
Schematic diagram
Component list
No. Name Quantity
1 Adapter 1 pc
2,3 Power Wire (longer +shorter) 2 pc
4 Holder - Lower 1 pc
5 Holder– Middle 1 pc
6 Holder– Upper 1 pc
7 Lamp 1set
8 Topper 1 pc
9 Screws (bigger +smaller）4+8 pcs
1,2,3,4 All wire connectors.
Caution
•This product is fragile and should be assembled with care.
•Please follow the below steps and requirements specified in the instruction to ensure
safety and reliability during the installation.

2
1) Assemble the holder
Assemble the 3 parts of the holder into a hole with 8 screws.
Note:Be sure to have the corresponding anchor points
lined up correctly before fixing.
2) Connect wires
(A) Thread the shorter power wire and its connector (4)
through the holder and then fix the holder onto the
bottom of lamp with 4 bigger screws.
(B) Fix two connectors (3) and (4) to combine two power
wires of 2 and 3.
3) Power on and enjoy
(A) Fix two connectors (1) and (2), and then connect the
adaptor with the main power source.
(B) Set the switch on the bottom of the lamp to the left. The
lights should be lit, snowflakes should be falling and
music should be playing. If it fails to perform such
functions, check if the connectors are well connected
until it can perform the functions. You can also turn the
switch to the right side to turn off the music.
Anchor
points
Anchor
points
Assembly Instructions