Hanover HVR100 User manual

HanoverOutdoorFurniture
IMPORTANT
Ifyouhaveanyproblemswiththisproduct(missingordamagedparts,assemblyissues,etc.),
PLEASEDONOTRETURNTOTHERETAILER/STORE
fromwhereyoupurchasedtheproduct.
PleasecallourToll‐FreeCustomerServiceHotlineat:1‐877-976-4402
Between9:00AMand5:00PMEasternTime,MondaythroughFriday
Orvisitourwebsiteat:www.hanover‐products.com
Toexpediteanyfuturewarrantyclaims,pleaseretaintheInstructionSheet,Warranty
Cardandreceiptforfutureuse.
For additionalon‐linesupportonassembly,troubleshootingandcare&maintenanceofyouroutdoor
furniture,pleasevisitourwebsiteat:www.hanover‐products.com.
6/1/2015(b)

4MM HEX KEY, SHORT, FOR DRILL
INCLUDED
4MM HEX KEY, ALLEN, T-HANDLE
INCLUDED
B - .273 X 3 SOCKET WAFER A
12
A - .273 X 2.50 SOCKET WAFER A
4
B
B
A
A
B
B
B
B
B
B
B
Qty. Description
Model: HVR100
TOOLS NEEDED
__(1) Hardware pack
__(2) Sideframes
__(2) Rocker bottoms
__(1) Back
__(1) Seat
__(1) Long brace
__(1) Short brace
__(1) Head piece
Step 1
Attach long brace, short brace and back
using (4) .27x3” screws.
Attach seat using (2) .27x2 1/2" screws
Note: front of seat is wider
Step 2
Insert head piece into top of post
Repeat step 1 on other side
Step 3
Attach rocker bottoms with (4) .27x3" screws
A
A
B
B
6/25/2015
ASSEMBLY INSTRUCTIONS