Loll Designs GO LOVESEAT & ROCKER User manual

GO LOVESEAT & ROCKER
ASSEMBLY INSTRUCTIONS
lolldesigns.com 1-877-740-3387
1
COUNT
X 6
X 1
X 7
SUPPORT
BRACE
2
COUNT
X 6
X 1
X 7
CHAIR SIDE 1
COUNT
ARM RESTS 1
COUNT
X 6
X 1
X 7
FOOT PLATE
INCLUDED PARTS
BLOCKS
1
COUNT
X 6
X 1
X 7
CHAIR BACK
BLOCKS 14
COUNT
1
COUNT
X 6
X 1
X 7
CHAIR SEAT
30
COUNT
1 INCH
BOLT
TOOL & HARDWARE
1
COUNT
5/32 ALLEN
WRENCH
ANGLE BLOCK
1
COUNT
THROUGH BLOCK
7
COUNT
LOCK BLOCK
6
COUNT
X 6
X 1
X 7
X 6
X 1
X 7
X 6
X 1
X 7
X 6
X 1
X 7
* ROCKER NOT SHOWN

ASSEMBLY INSTRUCTIONS * A Cordless Screw Gun will greatly reduce the time needed to assemble your Loll Furniture. Use a 5/32 Allen
bit or a Torx 25 bit. Be sure to adjust your clutch setting to a mid-range and do not over tighten bolts.
ATTACH FOOT PLATE
ATTACH CHAIR BACK
ATTACH ARM RESTS
ATTACH CHAIR SEAT
Insert Chair Seat into
Chair Side and Chair
Back grooved track.
Place Lock Block into
Chair Seat, insert
bolts, and tighten bolts
using allen wrench to
secure the Chair Seat
to the Chair Side.
ATTACH BACK SUPPORT &
ANGLE BLOCK
ATTACH SUPPORT BRACE
4
1
5
2
6
3
Insert Chair Back into
Chair Side grooved
track. Place Lock Block
into slot on Chair Back
and insert bolts. Tighten
bolts using allen wrench
to secure Chair Back to
the Chair Side.
Slide Through Blocks (2)
into Chair Brace. Insert
Chair Brace into Chair
Back and Chair Seat
grooved track. Insert
bolts and tighten using
allen wrench.
A: Align Foot Plate and
slide Through Block
in Support Brace.
Insert Bolts and
tighten using allen
wrench.
B: Slide Lock Block in
Foot Plate, insert
Bolts tighten using
allen wrench to
secure to Chair Side.
Repeat steps 1-2 & 4B
to attach other Chair
Side.
Slide Lock Blocks into
slots on Chair Sides and
place Arm Rest. Insert
bolts and tighten using
allen wrench
Repeat for other side.
A: Align Back Support
with Arm Rest ends,
insert Bolts, and
tighten using
allen wrench.
B: Align Angle Block
with Chair Back
holes, insert Bolts,
and tighten using
allen wrench.
BA
A
B