HANTEL HTT-800A User manual

CDMA WLL User’s Guide  HTT-800A

-1-
CDMA – 2000 1X
Fixed Wireless Terminal
User's Guide
Model No. HTT-800A
Supports Voice, PCO, G3 Fax, Data
Read this manual carefully before operating the instrument.
V1.0

CDMA WLL User’s Guide  HTT-800A

-2-
FCC RF EXPOSURE INFORMATION
WARNING! Read this information before using your phone
In August 1996 the Federal Communications
Commission (FCC) of the United States with its
action in Report and Order FCC 96~326
adopted an updated safety standard for human
exposure to radio frequency electromagnetic
energy emitted by FCC regulated transmitters.
Those guidelines are consistent with the safety
standard previously set by both U.S. and
international standards bodies. The design of
this phone complies with the FCC guidelines
and these international standards.
To comply with FCC RF exposure requirements,
a minimum separation distance of 2.5cm (1
inch) must be maintained between the
user/bystander and the back of the unit,
including the antenna.
When using the Optional external antenna
please note the following precautions:
This system is designed to be operated as a
fixed system device and must be located either
on the roof top site, or up on or near the ceiling
away from the user. It must be mounted in a
manner to ensure that all user's and bystanders
are kept a minimum of 20cm away from the
antennas at all times.

CDMA WLL User’s Guide  HTT-800A

-3-
Warning: Exposure to Radio Frequency
Radiation The radiated output power of this
device is far below the FCC radio frequency
exposure limits. Nevertheless, the device
should be used in such a manner that the
potential for human contact during normal
operation is minimized. In order to avoid the
possibility of exceeding the FCC radio
frequency exposure limits, human proximity
to the antenna should not be less than 20 cm
during normal operation. The gain of the
antenna for Cellular band must not exceed 2.0
dBi.
For more information about RF exposure, please visit
the FCC website at www.fcc.gov

CDMA WLL User’s Guide  HTT-800A

-4-
CONTENTS
FCC RF EXPOSURE INFORMATION.....................................2
HIGHLIGHTS...........................................................................9
1. BEFORE YOU START ...................................................13
1.1 SAFETY PRECAUTIONS........................................ 13
1.1.1 Warning............................................................ 13
1.1.2 Important.......................................................... 13
1.2 Optimal Phone Performance .................................. 13
1.3 Care and Service .................................................... 16
2. GETTING STARTED AND INSTALLATION...................18
2.1 Checking the Parts ................................................. 18
2.2 Know your Terminal ..............................................19
2.3 Setting up your Terminal ....................................... 21
2.3.1 Adjust Your FWT ............................................. 22
2.3.2 Adding More Phones ....................................... 22
2.3.3 Additional Telephone Equipment .................. 232
2.4 Installation on Desktop........................................... 23
2.5 Installation on Wall................................................. 23
2.6 How to Install Battery ............................................ 24
2.7 Installation for the Data Service ............................ 25
2.8 Indications .............................................................. 25

CDMA WLL User’s Guide  HTT-800A

-5-
2.9 Multi-extension Installations ................................. 26
3. BASIC FUNCTIONS..........................................................27
3.1 Power On/Off .......................................................... 27
3.2 Making a call........................................................... 28
3.3 Receiving a call....................................................... 28
3.4 Ending a call ........................................................... 29
4. ADVANCED FUNCTIONS & SETTING.............................30
4.1 One Minute Alert .................................................... 30
4.2 Alarm....................................................................... 30
4.2.1 12 Hour Mode .................................................. 30
4.2.2 24 Hour Mode .................................................. 31
4.2.3 Release Alarm Setting .....................................31
4.3 Connection tone...................................................... 31
4.4 Earpiece Volume .................................................... 32
4.5 CID / CLIP Mode..................................................... 32
4.6 Calls Restrict .......................................................... 33
4.6.1 Outgoing Call Restrict...................................... 33
4.6.2 Long Call Restrict .......................................... 33
4.6.3 International Call Restrict ..............................34
4.6.4 Incoming Call Restrict ..................................... 35
4.7 Lock Code............................................................... 36
4.8 Reset ....................................................................... 37
4.9 Auto Dial Time........................................................ 37
4.10 Data Service ......................................................... 38

CDMA WLL User’s Guide  HTT-800A

-6-
4.11 R-UIM (Optional).................................................. 38
4.12 Authentication Function (Optional) ...................... 39
5. SUPPLEMENTARY FUNCTIONS.....................................40
5.1 Call Functions ......................................................... 40
5.1.1 Speed Dial ........................................................ 40
5.1.2 Redialing .......................................................... 41
5.1.3 Emergency call ................................................ 42
5.1.4 Hot Line ........................................................... 43
5.2 Pay Phone Interface ............................................... 45
5.3 Phone Book........................................................... 465
5.3.1 Storing Phone Numbers................................... 46
5.3.2 Deleting Phone Numbers................................. 46
5.4 Voice Privacy ......................................................... 46
5.5 Ringer Frequency & Cadence Control ................... 47
5.5.1 Ringer Frequency Setting................................ 47
5.5.2 Ringer Cadence Setting ................................... 47
5.6 Dial Tone Frequency Control.................................48
5.7 Hook Flash.............................................................. 48
5.8 ROH (Receiver off Hook) ....................................... 49
5.9 Restrict Call Mode Setting ..................................... 49
5.9.1 Set Restrict Call Level..................................... 50
5.9.2 Storing (Deleting) the Permit Dial Number..... 50
5.9.3 Storing (Deleting) the Deny Dial Number
(Restricted dial number) ........................................... 51

CDMA WLL User’s Guide  HTT-800A

-7-
6. SYSTEM FUNCTIONS ......................................................52
6.1 Call Waiting............................................................. 52
6.2 Three-way calling.................................................. 52
6.3 Call Forwarding ...................................................... 52
7. FAX FUNCTIONS..............................................................53
7.1 FAX Set-up............................................................. 53
7.2 Sending FAX Message............................................ 53
7.3 Receiving G3 FAX Message ................................... 54
7.4 Receiving PC FAX Message ................................. 544
8. DATA SERVICE ................................................................56
8.1 For Windows 98, Windows 2000............................ 56
8.1.1 Setting the phone to DS (Data
Service) .......... 56
8.1.2 Setting a USB driver in PC.............................. 57
8.1.3 Setting a Standard Modem in PC..................... 66
8.1.4 Browsing the Internet...................................... 68
8.2 For Windows XP ..................................................... 74
8.2.1 Setting the phone to DS (Data Service) .......... 74
8.2.2 Setting a USB driver in PC.............................. 74
8.2.3 Setting a Standard Modem in PC..................... 82
8.2.4. Browsing the Internet..................................... 83
8.3 Data Installation Trouble Shooting ........................ 89
8.3.1 Message Box ................................................... 89
9. SUMMARY TABLE........................................................9796

CDMA WLL User’s Guide  HTT-800A

-8-
9.1 Advanced Functions ............................................... 96
9.2 Supplementary Functions ....................................... 98
10. TROUBLESHOOTING GUIDE ....................................1021
11. SPECIFICATIONS.......................................................1041

CDMA WLL User’s Guide  HTT-800A

-9-
Highlights
Dear Customer,
Congratulations on your purchase of the Fixed Wireless
Terminal Model No. HTT-800A designed to operate on
the latest digital mobile communications technology,
Code Division Multiple Access (CDMA). This CDMA
digital technology has greatly enhanced voice clarity and
can provide various advanced features. The terminal
enables the normal operation and direct connection of
standard telephone equipment into the cellular network.
Note:
Supplied Product supports Voice, PCO, G3 Fax, 14.4 kbps
data in Circuit mode & 144 kbps data in Packet mode.
■ This Model looks perfect on your desk in the office.
It can also be installed on any wall in your office or
home. Thanks to the wall-mount kit that comes with
the unit.
■ These Model owners can easily adjust the volume
of the handset (earpiece) with the volume control,
and set the volume at an optimal level.
■ This Model has a practical and elegant design. It
can be used at office or home. This Model also
offers many useful features and technological
advantages.
■ This Model has Versatile Installation Options.

CDMA WLL User’s Guide  HTT-800A

-10-
■ This Model offers its users superior voice quality
through its use of QCELP or EVRC Vocoder.
■ Various sounds and LED functions provide audio
and visual alerts for Low Battery, Air Link Cut-Off
and Function status.
■ The owner can use the terminal with the Outgoing
Call Lock function.
■ Connect this Model with your PC for data
transmission, PC Fax and SMS communication.
■ Simple and quick transmission of the stored
numbers in the phone book with One-Touch, Two-
Touch and Three-Touch Dial.
■ The Emergency Call Hold function enables a user to
contact emergency center personnel.
■ The Hotline Call function allows the most frequently
used numbers to be automatically connected when
a user picks up the handset.
■ The Voice Privacy function ensures against illegal
phone tapping and thus it can be prevented.
■ The Authentication Key function prevents the
owner’s phone numbers from being cloned by
others.
■ CID/CLIP function lets you know who is calling you.
■ G3 Fax service is supported for analog environment.
■ The Pay Phone Interface allows this Model to work
as a payphone.
■ This Model offers R-UIM Function (Optional).

CDMA WLL User’s Guide  HTT-800A

-11-
This Model provides:
■ AC Power supply with AC/DC Adapter.
■ Touch tone (DTMF) or Pulse Dialing
■ A phone jack to plug in the telephone
equipment (RJ-11 Port)
■ Support Caller ID Telephone
■ Ring voltage used to ring the telephone
connected to the unit, with a REN (Ringer
Equivalence Numbers) of 4 Phones.
■ A phone jack to plug in the G3 FAX equipment
(RJ-11 Port)
■ Data Port for service and repair (USB / RS-232
data cable, Optional)
■ Three lights (LEDs) to indicate the status of the
unit
■ Dipole Antenna
■ R-UIM (Optional)
Some of the features are supported by service provider’s
system.

CDMA WLL User’s Guide  HTT-800A

-12-
For instance, the following features may not be
supported:
■ Emergency Call
■ Hot Line Call
■ Speed Dial
■ Alarm
■ Outgoing Call Lock

CDMA WLL User’s Guide  HTT-800A

-13-
1. Before You Start
1.1 SAFETY PRECAUTIONS
1.1.1 Warning
To reduce the risk of fire or electric shock, do not expose
this product to rain or moisture. Do not use this product
near swimming pools or other bodies of water.
Telephones with multiple terminating impedance, should
be set for 600ohms.
The adapter provided along with FWT is designed for a
rated voltage only. So it may cause trouble, if the
adapter is used out of a rated voltage range.
1.1.2 Important
Before installing or operating this product, read this
information.
1.2 Optimal Phone Performance
■ Do not use the unit with a damaged antenna.
Have your antenna replaced by a qualified
technician immediately. Use only a
manufacturer-approved antenna. Non-approved
antennas, modifications, or attachments could
impair call quality, damage the Terminal /

CDMA WLL User’s Guide  HTT-800A

-14-
phone.
■ For the best call quality, keep the antenna free
from obstructions and point the antenna straight
up.
■ Do not operate your product when holding the
antenna, or when someone is within four inches
(ten centimeters) of the antenna. Holding the
antenna affects call quality and may cause the
telephone to operate at a higher power level
than needed.
■ RF energy may affect improperly installed or
inadequately shielded personal medical devices
such as pace markers, hospital monitor.
Consult the manufacturer of any personal
medical devices to determine if they are
adequately shielded from external RF energy.
■ Turn your terminal OFF in health care facilities
when any regulations posted in the areas
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
■ If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged

CDMA WLL User’s Guide  HTT-800A

-15-
to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the radio
or television and the telephone.
-Connect the equipment into an outlet on a
circuit different from that to which the
terminal is connected.
-Consult you Authorized Dealer of an
experienced Radio/TV technician for help.
■ Use only the battery, antenna and AC power
supply provided by Authorized Dealer. Using
any other type will invalidate the warranty.
■ Only authorized personnel should service the
phone and its accessories. Faulty installation or
service may be dangerous and invalidate the
warranty.
■ Do not use the unit in designated “no cellular
phone use” area.
■ Avoid exposure to high temperature or humidity
■ Avoid wetting the unit with any liquids. If the
unit gets wet, turn the power off immediately
and remove the backup battery and AC power
supply. If the unit is inoperable, then return to
the service agent for service.

CDMA WLL User’s Guide  HTT-800A

-16-
■ Avoid shock or impact.
■ We recommend you to charge the backup
battery before initial use for 10/12 hours.
Backup battery may be discharged during
delivery.
■ This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
-This device may not cause harmful
interference, and
-This device must accept any interference
received, including interference that may
cause undesired operation.
1.3 Care and Service
■ If the unit fails for any reason, do not attempt to
disassemble; contact the telephone service
provider for assistance.
■ Unplug the FWT from the wall outlet and
remove antenna (or disconnect antenna cable)
before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
■ If any of the following conditions exist: Unplug
the unit at the wall plug, remove battery, and
call the service provider.

CDMA WLL User’s Guide  HTT-800A

-17-
-The unit has been exposed to rain or water.
-Liquid has been spilled into the unit.
-The power supply cord is damaged or
frayed.
-The unit has been dropped or damaged.
-The unit does not work normally by
following the operating instructions.
Note:
■ Don't disassemble or modify this product
deliberately.
■ Use only an approved adapter.
■ Don't touch adapter with wet hands.
■ Don't install this product in dusty area.
■ Avoid areas near sunlight, heating apparatus,
vibration
■ This product is designed for being used within
commercial power. In other voltage area,
please install voltage stability device and use
it.
■ When struck by lightning, unplug to protect
terminal from lightning damage and fire.
■ Don't install this product near other electronic
appliance.
■ When installing battery, be careful of polarity.
■ Install in area of good signal. ( Signal LED is

CDMA WLL User’s Guide  HTT-800A

-18-
Green )
2. Getting Started and Installation
2.1 Checking the Parts
Please make sure that these components are present
before you begin the unit installation. And then compare
the following figures and components. If components are
missing or damage is found, contact the store where you
purchased the unit immediately.

CDMA WLL User’s Guide  HTT-800A

-19-
2.2 Know your Terminal
1. Antenna: Connector Connecting Port for TNC
Antenna
2. LEDs: Indicate the status of the unit
-LED indications are described in the
following table.

CDMA WLL User’s Guide  HTT-800A

-20-
3. DATA Port: The DATA Port used to connect the
terminal to the PC for maintenance/repair, and
data communication.
4. Battery Switch: If you use Battery, you should
switch on the battery Switch.
The Battery pack is charged when battery
switch is on.
5. UIM Connector: Refer to 4.11 R-UIM.
Name LED
Color Activity Meaning
GREEN On
AC/DC adapter is giving 12V DC
without a battery.
ORANGE On Battery is fully charged. (AC/DC
adapter is connected.)
ORANGE Flashing Battery is charging. (AC/DC
adapter is connected.)
RED On
Battery Power is applied without
AC/DC adapter.
RED Flashing Low Battery Warning. (AC/DC
adapter is not connected.)
POWER
- Off
No AC Power/No power is being
supplied by battery.
GREEN On Good Signal
RED On Poor Signal
RED Flashing Poor Signal Warning
SIGNAL
- Off No service area.
GREEN On
Voice Message is received.
Data Call is connected.
GREEN Flashing Data service or G3 FAX is
incoming / outgoing.
MODE
RED Flashing Voice call is incoming.