Happy Beds Loxley Bed Double User manual

Loxley Bed - Double
Assembly Instructions
www.happybeds.co.uk
Important before assembly: .
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
Assemble the product as close to its intended final location/room as possible.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Further instructions are on the following pages.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause damage to the
joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please contact our
customer services (details at the back of these instructions)
(Not metal)
These tools are not
necessary, but may help
to assemble the product.
Do NOT use any power
tools as this may
damage the frame.

Box 1
A. Headboard (x1)
Box 2
B. Side Rails (x2)
D. Footboard (x1) E. Support Leg (x2)
F. Slats (x26)
G. Legs (x4) H. M8x30mm Bolts (x12)I. Nuts (x4) J. Flat Washer (x8) K. Spring Washer (x8)
L. M5 Allen Key (x1) M. Spanner (x1) N. Slat Caps (x26) O. Centre Slat Caps (x13) P. M8x40mm Bolts (x4)
C. Centre Support Rail (x1)

G
Unpack all components from the boxes and check you are not missing anything. Please check these against the list on
Please do not use any power tools for this assembly as it will void your guarantee.
Step 1
Page 3. Should you identify any missing components, please contact the retailer you purchased the bed from.
Step 2
Attach 2x Legs (G) to the 1x Headboard (A) and then attach 2x Legs (G) to the 1x Footboard (D)

E C P L I
Next, attach 2x Support Leg ( ) to 1x Centre Support Rail ( ) using 4x M8x40mm Bolts ( ), Allen Key ( ), 4x Nuts ( )
and Spanner (M).
L
C
P
I
E
M
Step 4
A
D
B
H
K
J
L
C
H
L
Step 3
Attach 2 x Side rails (B) to 1 x Headboard (A) and 1 x Footboard (D) using 8 x M8x30mm Bolt (H),
8 x Spring Washer (K), 8 x Flat Washer (J) and 1 x M5 Allen Key (L). Then attach 1 x Centre Support Rail (C)
to 1 x Headboard (A) and 1 x Footboard (D) using 4 x M8x30mm Bolt (H) and 1 x M5 Allen Key (L).

Step 5
N
F
F
B
O
C
Slot each Slat Cap (N) onto the end of each Slat (F), then slot each Slat (F) into each Centre Slat Cap (O).
Press firmly into each slat rail located on the inside of the side rails (B) and then into the Centre Support Rail (C).

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the product across the floor as
this will cause damage to the joints. If the product is used on hard flooring, such as wood or laminated
floor, you must place some protection under the legs to stop the product from moving. If this is not
adhered to, it could result in failure to the product that will invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
In the unlikely event that you have problems putting this product together or have damaged or
missing parts, please contact us by visiting:
https://www.happybeds.co.uk/customer-service
Notes