Happy Beds Shoreditch Bed User manual

FABRIC BED 135CM
o
SHO203
VERSION: 220518
Assembly Instructions
o
o
o
o
Shoreditch Bed
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

03
Non-Slip pads 30x60mm x 4

04
Safety Advise
Please take the time to carefully read through the whole of these
instructions before you commence.
Keep these instructions for future reference.
Unpack, inspect andcheck off all of the contents.
Please dispose of all packaging safety.
Small component part could choke a child if swallowed.
We strongly recommend that you keep children well away from
the work area.
It would be sensible to lay a sheet or blanket on the floor where
you intend to work to avoid scratching this product and to protect
your floor.
This product is heavy. Take extreme care when lifting to avoid
personal injury or damage to the product.
Assemble the product as close to its intended final position in the
room as possible.
We strongly urge that you do not use Power Tools, Such as drills
or electric screwdrivers during this assembly as this could cause
irreparable damage to your product and will invalidate the
warranty.
HANDY HINT: If you keep the hardware in a bowl during
assembly you will be less likely to lose them.

STEP 2
Fix side rail to headboard.
STEP 3
Fix legs to headboard and footboard.
Fix hook bracket to side rail.
05
STEP 1

Fix horizontal support rail to footboard.
Fix side rail to footboard.
STEP 5
STEP 4
06
o
ooo

Fix centre support rail to headboard and footboard.
STEP 7
Fix support legs to centre support rail.
STEP 6
07
o
ooo

12
Fix slat and plastic cap.
STEP 8
08
o
ooo
912
11 11

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes