Happy Beds Lynx 4 Drawer Chest User manual

Lynx 4 Drawer Chest
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

8
1
Left Drawer Panel
1
09
01
3.5 x 25mm Screw
Back Panel
4
01
02
02
4
1
1
1
2
Descripion
Page
O
J
10 x 10mm Tack
03
Right Drawer Panel
3,5 x 14mm Screw
Simple Minifix Screw
P5
L
Drawer Base
4
Descripion
04
** You will need a small mallet and a
screwdriver for assembly.
** Some screws and wooden dowel
may remain.
** Wall plug and screw is supplied to
attach strap to the wall.
08
05
2
4
4
1
4
1
06
11
04
4
Drawer slide left
4.5 x 45mm Screw
Plastic Cap
A6 Part
18
42
1
Top Panel
Left Panel
Recycle
Right Panel
Plinth Strap 1
Metallic slide the right field
Drawer slide right
Qty
4
8
Box
1
10
12
03 07
4
4
1
1
Qty
Parts List
1
1
1
12
1
1
1
1
1
35
Cam Lock
4
6
Metallic slide the left field
Centre Support
11
10
09
08
of
07
Back Panel
Identification of Accessories
06
Part
1
Spine
05 18
8
04
Drawer Back
XD
XC
XB
XA
Handles
W2
T
33
1
1
Glue
5 x 60 mm Screw
A1
A
Bushing
B3
E
E7
E9
8 x 30mm Wooden Dowel
Small Plastic Foot
Drawer Front
M
N
1211109876543210 1615
Vendor: S000139
1413

1st HOLE
FOR UP
MARKING
FOR FRONT
1st HOLE
FOR FRONT
MARKING
FOR UP
06
03
4x
Step 1:
of
4x
08 01
Step 2:
Attach the metallic slide (XB) to the right panel (3) using hadware part P5. Insert hardware part E
using a small mallet (not provided) and the part J using screwdriver (not provided).
Page
2x
6
4x
07
4x
Insert hardware parts E and J as shown using hardware part A1, a small mallet and a screwdriver (not
provided).
Step 3:
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Attach the metallic slide (XA) to the left panel (2) using hadware part P5. Insert hardware part E
using a small mallet (not provided) and the part J using screwdriver (not provided).
02
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
3
05
11
04
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
E
E
E
E
A1
E
E
E
E
E
E
E
E
J
J
J
J
J
J
E
E
J
J
J
XA
P5
P5
XB
E
E
J
J
J
Vendor: S000139

of
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
04
Step 4:
12
Page 4
Step 5:
04
03
10
11
Attach the top panel (1) using hardware parts L then attach hardware parts E7 to the base using
hardware part N. You will need to use a screwdriver (not provided).
6
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Attach the left panel (2) and right panel (3) to the plinths (4) and centre support (11) using hardware
part L and a screwdriver (not provided).
Step 6:
02
Connect the back panels (10) using the spine (A6) and secure using hardware part N and a small
mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
01
Vendor: S000139
L
L
N
L
N
N
L
N
L
L
L
L
L
E7
E7
E7
E7
N
N
N
N
N
N
A6

2º
A
1º
P5
E9
Attach the drawer front (5) using hardware part A1, L and M with a screwdriver (not provided). Attach
the handle W2 using hardware part T with a screwdriver (not provided).
08
Birlea Furniture advise you use the wall straps provided to further enhance the safety of this product.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
To secure the item to the wall use hardware parts A, B3 and E9 using a drilling machine (not provided)
and a screwdriver (not provided). Then attach hardware part P5 to the item with a screwdriver (not provided).
05
6
09
Step 9:
Attach the left drawer panel (6) and right drawer panel (7) to the drawer back (8) and 9 using hardware
part O and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 8:
5
Page
06
07
of
Step 7:
Vendor: S000139
O
O
T
T
W2
LM
M
L
A1
B3
A

05
05
05
Step 11: Insert the drawers on the metallic slide as shown bellow.
6 6 ofPage
05
Step 10:
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Attach the drawer slide XC e XD in the underside of the drawer using hardware part P5 with a
screwdriver (not provided).
XD
XC
P5
P5
P5
P5
Vendor: S000139

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes