Happy Beds Blake Wooden Trundle Bed User manual

Blake Wooden Trundle Bed
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.
Page 1 of 5
DO NOT: use this bed frame unless all fixings are secured.
DO NOT: push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
DO NOT: use any power tools as this may damage the frame and will invalidate any claim.
ecommendation: Periodical re-tightening of fixings.
Warning
this bed is placed on a non-carpeted floor you must place some protection
nder all legs to stop the bed frame from moving. If this is not adhered to there is no
uarantee if the bed frame collapses.
his unit is heavy. Please use an assistant when lifting.

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

PART LIST
BOX QTY
PART DESCRIPTION
HARDWARE LIST
DESCRIPTION
PART BOX QTY
Page 2 of 5
Side Rail
13/3 2
End Panel
23/3 2
Leg Support Rail
33/3 2
Wood Slat
43/3 14
A
M6 x 60mm JCBC Bolt + Barrel Nut
C
M8 x 30mm Wood Dowel
M6 Allen Key
3/3
3/3 12
8
3/3 1
F
B
M6 x 70mm JCBC Bolt + Barrel Nut 3/3 8
D#4 x 30mm Screw 3/3 8
E
M14 Spanner 3/3 1
G
Caster Wheels 3/3 4
** You will need screwdriver (not provided)
5Centre Metal Bar 3/3 1
H
#3.5 x 16mm Screw 3/3 2

Step 1 : Attach the Leg Support Rail (3) to the Side Rail (1). Please secure using hardware A,C and G.
Step 2 : Attach the another Side Rail (1) to the Leg Support Rail (3).
Please secure using hardware A,C and G.
Page 3 of 5
C
AG
1
3
3
G
C
A
3
3
1

Step 3 : Attach the End Panel (2) front and back to the Side Rails (1). Please secure using hardware A,B
and G .
Step 4 : Attach the Wood Slats (4) to the trundle Side Rails (1) using hardware part (D) and fully tighten
using a screwdriver (not provided) and the last attach the Caster Wheel (E) to the trundle legs using
hardware part (G). After that fix Metal Center Bar (5) to the Side Rails using Screw (F). Please ensure the bed
slat located internally before fix in the Screw (F) as shown to prevent the bed slat fell down.
Page 4 of 5
G
A
B
E
2
2
4
G
D
D
DD
DD
D
D
D
D
8 X
Complete Ready to Use
F
5

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes