Happy Beds Newton User manual

Title of Product
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
Newton 4FT6 & 5FT 4 Drawer Storage Bed

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

Parts Description Box Qty
1 WOOD DOWEL M6 x 30mm 3 27 PCS
2JCBC BOLT M6 x 40mm 3 8 PCS
3 M6 FLAT WASHER 3 10 PCS
4M6 SPRING WASHER 3 8 PCS
5 WOOD SCREW M4 X 38mm 3 71 PCS
6 BED SLAT SIDE FITTER 3 24 PCS
7BED SLAT CENTER FITTER 3 12 PCS
8 MINIFIX BOLT 634-2B 3 10 PCS
9 MINIFIX HUSING ZINC 1595 3 10 PCS
10 ST 25 STEEL (SP) 3 40 PCS
11 111 BUTTON CAP (M8)(COL.BEECH) 3 10 PCS
12 M4 ALLEN KEY (BALL SHAPE) 3 1 PC
13 M5 ALLEN KEY (BALL SHAPE) 3 1 PC
14 JCBC BOLT M6 x 40mm (BLACK) 3 4 PCS
15 M6 HEX NUT 3 4 PCS
16 SPANNER (10mm) 3 1 PC
17 JCBC BOLT M8 x 40mm 3 8 PCS
18 JCBC BOLT M8 x 20mm 3 4 PCS
PAGE 3
HARDWARE LIST
*You will need a small mallet and screwdriver (not provided)

Parts Description Box Qty
A HEADBOARD 1 1 PC
B FOOTBOARD 2 1 PC
C SIDE RAIL 3 2 PCS
D METAL CENTER RAIL 3 1 PC
E CENTRE SUPPORT LEGS 3 2 PCS
F SIDE DRAWER FRAME SUPPORTS 4 2 PCS
G FRONT DRAWER FRAME SUPPORT 4 1 PC
H FRONT DRAWER FRAME DIVIDER 4 1 PC
IFRONT DRAWER SIDE PANEL (R) 4 1 PC
JFRONT DRAWER SIDE PANEL (L) 4 1 PC
K FRONT DRAWER FRAME SIDE 4 1 PC
L SIDE DRAWER FRAME 4 1 PC
M SIDE DRAWER BACK FRAME 4 2 PCS
N FRONT DRAWER FRONT 22 PCS
HEADBOAD
PAGE 4
PART LIST

Parts Description Box Qty
O FRONT DRAWER BACK 3 2 PCS
PFRONT DRAWER SIDE (R) 3 2 PCS
Q FRONT DRAWER SIDE (L) 32 PCS
R FRONT DRAWER BOTTOM PANELS 3 2 PCS
S FRONT DRAWER BOTTOM SUPPORTS 3 4 PCS
T SIDE DRAWER FRONTS 3 2 PCS
USIDE DRAWER BACKS 3 2 PCS
VSIDE DRAWER SIDE (R) 3 2 PCS
WSIDE DRAWER SIDE (L) 3 2 PCS
X SIDE DRAWER BOTTOM PANELS 3 2 PCS
Y SIDE DRAWER BOTTOM SUPPORTS 3 4 PCS
Z BED FRAME LEGS 3 2 PCS
AA SPRUNG SLATS 3 24 PCS
AB FRONT DRAWER FRAME SUPPORTS 4 1 PC
PAGE 5
PART LIST

STEP 1
D
E
12
3
16 15
14 x 4 PCS 15 x 4 PCS PAGE 6
414
16 x 1 PC 12 x 1 PC3 x 4 PCS 4 x 4 PCS
STEP 2
Take out DRAWER BOTTOM PANEL (R) and DRAWER BOTTOM PANEL (X) and
from the HEADBOARD (A).
A
R
X
BACK VIEW

PAGE 7
F
F
F
G
1
1
1
1
B
Z
2
12
2 x 2 PCS 12 x 1 PC
STEP 4
STEP 3
1 x 8 PCS

STEP 5
PAGE 8
STEP 6
I
1
1
J
1
H
1
K
M
L
x 2
1
1
H
C
8
8
8
HEADBOAD
HEADBOAD
B
8
8 x 10 PCS
1 x 19 PCS

STEP 7
PAGE 9
STEP 8
"TOP"
"TOP" label must be skyward as picture shown.
Join together the 2x Front Drawer Front (N), 2x Back Drawer Back (O) and 4x
Front Drawer Side (P) & (Q) using hardware M4 x 38mm x 16 pcs (5) and
screwdriver (not provided). Repeat for the remaining drawer.
x 2 5
Q
O
N
x 8
P
5 x 16 PCS
Slide the 2x Front Drawer Bottom Panels (R) into position on all two drawer.
R
FRONT DRAWER
FRONT DRAWER
x 2
TOP
SR TOP
Note : Assemble according to sticker

STEP 9
PAGE 10
STEP 10
FRONT DRAWER
Secure the 4x Front Drawer Bottom Support (S) using hardware M4 x 38 x 8pcs (5)
and screwdriver (not provided).
x 4
5S
5 x 8 PCS
Secure with hardware ST 25 STEEL x 20pcs (10) and small mallet (not provide)
x 10
10
10 x 20 PCS
x 2
x 2
FRONT DRAWER

STEP 11
PAGE 11
STEP 12
"TOP"
"TOP" label must be skyward as picture shown.
x 2 5
W
U
T
x 8
V
5 x 16 PCS
X
SIDE DRAWER
x 2
TOP
FB TOP
SIDE DRAWER
Note : Assemble according to sticker
Join together the 2x Side Drawer Fronts (T), 2x Side Drawer Backs (U) and 4x Side
Drawer Side (V) & (W) using hardware M4 x 38mm x 16 pcs (5) and screwdriver
(not provided). Repeat for the remaining drawer.
Slide the 2x Side Drawer Bottom Panels (X) into position on all two drawer.

STEP 13
PAGE 12
STEP 14
x 4
5Y
5 x 8 PCS
x 10
10
10 x 20 PCS
x 2
x 2
SIDE DRAWER
SIDE DRAWER
Secure the 4x Side Drawer Bottom Support (Y) using hardware M4 x 38 x 8pcs(5)
and screwdriver (not provided).
Secure with hardware ST 25 STEEL x 20pcs (10) and small mallet (not provide)

STEP 15
PAGE 13
STEP 16
STEP 15.1
STEP 15.2 x 2
H
J
AB
5
FH
H
5 x 2 PCS
DO NOT use any power tools as this may damage the frame and will
invalidate any claim.
STEP 16.1
STEP 16.2
STEP 16.4
5
9
11
II
R
G
GI
H
G
G
STEP 16.3
5 x 1 PC 9 x 1 PC 11 x 1 PC
Note : Arrow
direction part need
point toward the
hole.
REMARK

STEP 17
PAGE 14
STEP 18
STEP 18.2
5
STEP 18.1
K
K
M
K
M
5 x 4 PCS
STEP 17.1
STEP 17.2
5
K
J
H
K
J
K
I
5 x 6 PCS

STEP 19
PAGE 15
STEP 20
STEP 20.3
12
23
5
H
JJ
B
STEP 20.1 STEP 20.2
9
H11 B
5 x 2 PCS 9 x 1 PC 11 x 1 PC
Note : Arrow
direction part need
point toward the
hole.
REMARK
3 x 2 PCS2 x 2 PCS 12 x 1 PC
STEP 19.2
L
5
5
LL
5
STEP 19.1
L
K
MM
F
F
F
5 x 8 PCS
STEP 19.3

STEP 21
PAGE 16
STEP 21.3
11
9
B
C
C
C
Note: Make sure the sticker
"-> HEADBOARD" faced to
headboard [A]
STEP 21.1
STEP 21.4
9 x 4 PCS 11 x 4 PCS 13 x 1 PC
Note : Arrow
direction part need
point toward the
hole.
REMARK
STEP 22.1
11
9
STEP 22.2
C
C
C
C
B
9 x 4 PCS 11 x 4 PCS 13 x 1 PC
Note : Arrow
direction part need
point toward the
hole.
REMARK
C
A13
18
STEP 21.2
C
A
13 18
STEP 22.3
18 x 2 PCS
18 x 2 PCS
STEP 22

STEP 23
PAGE 17
STEP 24
17 x 8 PCS 13 x 1 PC
C
A13
17
SIDE DRAWER
SIDE DRAWER

STEP 25
PAGE 18
STEP 26
FRONT DRAWER
24
12
D
D
2 x 4 PCS 3 x 4 PCS
3
12 x 1 PC4 x 4 PCS

STEP 27
PAGE 19
AA
7
AA
6
6
Palm
Palm
AA
6
7
STEP 27.1
STEP 27.2
AA
AA
6 x 24 PCS 7 x 12 PCS
1235mm
1740mm
2135mm
395mm
Extra Dimensions
Front Drawer Height = 150mm
Front Drawer Length = 565mm
Front Drawer Width = 480mm
Side Drawer Height = 135mm
Side Drawer Length = 760mm
Side Drawer Width = 480mm
All dimensions are approximates.
STEP 28

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the product across the
floor as this will cause damage to the joints. If the product is used on hard flooring, such as
wood or laminated floor, you must place some protection under the legs to stop the product
from moving. If this is not adhered to, it could result in failure to the product that will invalidate
the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes