Happy Beds Hannover Ottoman Bed 4FT6 User manual

Hannover Ottoman Bed 4FT6

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

Important for Ottoman and other
gas lift beds
www.happybeds.co.uk
Note:
The bed base is in the upright position when first assembled as the gas lifts are fully
extended during shipment for safety. After assembly a firm downward push will be required
to overcome any resisitance in the gas lifts as these may initially stick. We suggest placing
a mattress on top of the bed base to aide this and also test the operation of your new lift up
bed by lifting and pushing down the bed base a few times to allow the lfting mechanism to
bed in.
The lift mechanism provides assistance with the lift of the mattress fitted to the base. It does
not lift the mattress for you. The system has been designed to effectively lift the base
system fitted with a variety of mattress weights and combinations of depths. Depending on
the combination of the mattress weight and depth determines the degree of assistance
provided by the mechanism.
Following the installation of the mechanism lift, pull the base up and down a few times to
free off the system. The gas cylinders fitted to the system may be stiff when first used or if
the system has not been operated for a period of time.
Use the strap handles to lift up the mattress base using two hands. Pull the mattress base
down using two hands equally spaced from the centre of the mattress base. DO NOT pull
down on one side of the base only as this is likely to damage the base system with potential
failure of the mattress base system and lift mechanism.
Do NOT operate the lift up mechanism without the mattress placed on the base.
Caution:
Do NOT allow children to operate the lift mechanism.
Do NOT allow children near the lift base when operating the mechanism.
Do NOT allow children in the area of the internal storage base.
Keep hands clear of the mechanism when operating the base system.
Do NOT stand inside the bed or the internal storage base.
Do NOT overload the internal storage base.

2 OF 4
Step 1:
To fix the side rails(4)to the headboard(3)and footboard(2) you will need to use hardware parts B,C and D
with the M5 allen key(A).
To fix the wooden block(1) to the footboard(2)you will need to use hardware parts J with the M5 allen key(A).
DO NOT use any power tools as this may damage the bed frame and will invalidate any claims.
M5 Allen Key
(1pc)
A
Bolts(M8x30mm)
(8 pcs)
B
Spring Washer(M8)
(8 pcs)
Flat Washer(M8x22mm)
(8 pcs)
C
D
J
Bolts(M8x45mm)
(2 pcs)
J
3
2
PARTS LIST HARDWARE LIST
No No
Qty Qty
1
2
3
4
5
6
7
8
9
1
1
1
4
1
1
A
B
C
D
E
F
G
H
I
J
K
1
8
1
12
8
1
8
10
4
Item Item
Footboard
Headboard
Side Rails
Cross Bar
Corner Bracket
Slats
Metal Hook
Pull Strap Single Plastic caps
4
L
M5 Allen Key
Bolts(M8x30mm)
Spring Washer(M8)
Flat Washer(M8x22mm)
Nuts(8x13)
Spanner(8x13)
Bolts(M6x15mm)
M4 Allen Key
Bolts(M8x15mm)
10
11
12
Support Leg
Wooden Block
1
2
1
M
Bolts(M8x45mm)
Bolts(M8x70mm)
10
28
1
13 Woven Fabric
14
1
Box
3
3
1
2
3
2
3
3
3
3
3
3
3
(Found in box3)
Centre support bar
2
Front frame rail
15 Back frame rail 1
3
16 Left frame rail 21
14
17 Right frame rail 21
4
Cross support bar 32
Double Plastic caps
28

Step 3:
DO NOT use any power tools, this may damage the bed frame and will invalidate any claims.
3 OF 4
Step 2:
To attach the corner bracket (7)to the headboard(3),footboard(2) and side rails(4)you will need to use hardware
parts G and the M4 allen key(I).
To fix the cross bar(6) to the side rails ,you will need to use hardware parts G and the M4 allen key(I).
DO NOT use any power tools as this may damage the bed frame and will invalidate any claims.
G
I
Bolts(M6x15mm)
(10 pcs)
M4 Allen Key
(1 pc)
A
E
H
F
M5 Allen Key
(1 pc)
Nuts(8x13)
(6 pcs)
Spanner(8x13)
(1 pc)
Bolts(M8x15mm)
(4 pcs)
JBolts(M8x45mm)
(6 pcs)
Insert the metal hook(11) to the front frame rail(14).
To attach the front frame rail(14)and back frame rail（15）to the left frame rail (16)and right frame rail(17),
you will need hardware parts H with the M5 allen key(A).
To attach the centre support bar（8) to the front frame rail(14)and back frame rail(15),you will need hardware
parts J and E with the M5 allen key(A) and the spanner(F).
To attach the support leg（10） to the centre support bar(8),you will need hardware parts J and E with
the M5 allen key(A) and the spanner(F).
15
16
17
8
15
16
17
11
8
10
J
J
A
F
E
14
11
H
15
17
14 14 16
J
14 15
F
E
8
A
J
7
3
6
42
G

Step 4:
DO NOT use any power tools as this may damage the bed frame and will invalidate any claims.
4 OF 4
To attach the metal frame(14/15/16/17) and cross support bar(5)to the gas lift pre-fixed to the side rails,
you will need to use hardware parts K、E and J with the M5 allen key(A) and the spanner(F).
A
F
E
K
M5 Allen Key
(1 pc)
Nuts(8x13)
(6 pcs)
Spanner(8x13)
(1 pc)
Bolts(M8x70mm)
(4 pcs)
5
5
A
A
A
K
J
K
To assemble the slats(9) place a single plastic cap(L) onto each
To attach the pull strap(12) to the back frame rail(15)you
will place the pull strap（12）beneath the metal frame and then
pull the strap on the inner side of the frame through the strap on the outer side of the frame to form a knot.
end of every slat then you need to push the double slat caps(M) into
the metal frame.
Tilt the bedframe on to its side and attach the fabric base(13).
Step 5:
DO NOT use any power tools as this may damage the bed frame and will invalidate any claims.
13
9
L
9
M
L
12
15
J
Bolts(M8x45mm)
(2 pcs)
5
9Slats
(28 pcs)
L
Single Plastic caps
(28 pcs)
M
Double Plastic caps
(14 pcs)

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the product across the
floor as this will cause damage to the joints. If the product is used on hard flooring, such as
wood or laminated floor, you must place some protection under the legs to stop the product
from moving. If this is not adhered to, it could result in failure to the product that will invalidate
the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes