Happy Beds Winchester 2 Door Wardrobe User manual

Winchester 2 Door Wardrobe
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

012345 6 7891 0 1 1 1 2 1 3 1 4 1 5 1 6
mm
Hardware List
Part Item Qty
A Wooden Dowel 6
B Cam Bolt 28
C Cam Lock 28
D Tack 80
E Slip Shoe 4
F 25mm Screw 3
G 14mm Screw 30
H Sticker 8
I Handle 2
J Hat Stand Suport 2
K 45mm Screw 4
L Hinge 6
M Door Stop 1
NBack Profile 1
O Hatstand 1
PSafety Strap 2
2X
Parts List
Part Item Qty
1 Right Side 1
2Left Side 1
3Base 1
4 Top 1
5 Middle Top 1
6Back Traverse 2
7 Column 2
8Bottom Traverse 1
9 Upper Traverse 1
10 Baseboard 1
11 Back 2
12* Door 2
12
3
4
5
6
7
7
9
6
10
11 11
8
12

Vendor: S000401
B
B
4
B
B
8
Step 1: Insert the hardware (A) into the back traverse (6) and baseboard (10).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Step 2: Insert the hardware (B) in the right side (1), left side (2), top (4), column (7) and bottom
traverse (8). Then fix hardware (J) onto the right side (1) and left side (2) using hardware (G).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
A
6
A
A
10
A
2X
1
2
B
B
B
B
B
B
G
J
B
B
B
B
7
2X

Vendor: S000401
Step 3: Assemble column (7) tothe right side (1) and left side (2) using hardware (C).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
C
12
7
C
C
C
Step 4: Attach the bottom traverse (8) tothe base (3) using hardware (C). Then fix hardware (M)
onto the base (3) using hardware (G).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
3
8
G
M
C
C

Vendor: S000401
1
2
C
C
Step 5: Attach hardware (L) to the door (12) using hardware (G).
Attach hardware (I) tothe door (12) using hardware (K).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
G
KL
I
12
3
2X
Step 6: Attach the base (3) and middle top (5) to the right side (1) and left side (2) using hardware
(C).Then attach the baseboard (10) and back traverse (6) to the right side (1) and left side (2)
using hardware (A) and (C).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
C
B
C
5
C
C
C
6
6
10

Vendor: S000401
Step 7: Attach the top (4) using hardware (C). Then attach hardware (E) and (D) to the bottom of the
right side (1) and left side (2).
Attach the upper traverse (9) to back traverse (6) using hardware (F).
Insert the hardware (O) inside the product, above the hardware (J).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
4
C
F
F
9O
D
E
D
D
11
N
N
11
11 D
Step 8: Attach the back (11) to the back of the assembled product using hardware (D) and combining
them using hardware (N).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
11
D

Vendor: S000401
12
G
L
H
12
Step 9: Fix door (12) tothe right side (1) and left side (2) using hardware (G), (L) and a
screwdriver (not provided).
Insert hardware (H) over the holes show below.
Attach the safety strap (P) to the back of the wardrobe and wall following the diagram.
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
12
P
Safety Strap

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes