Happy Beds Ravello 2 Drawer Storage Bed User manual

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

Hardware
Parts
A
Headboard - 1 X
B C D
Footboard - 1 X Side Rail - 2 X Centre Rail - 1 X Centre Support Legs
- 3 X
E
Support Legs - 4 X
F G H I J
K L
Drawer Front Panel I
- 2 XSprung Slat - 32 X Drawer Side Panel - 4 X Drawer Front Panel II - 2 X
Drawer Bottom Panel
- 2 X Drawer Back Panel - 2 X Bottom Support Rail I - 4 X Bottom Support Rail II - 2 X Wheel x 10pcs - 10 X
M N O
P
Wooden Foot - 4 X 03
M8 x 30mm Bolt
- 16 X
Already inserted into
Head & Foot Ends
1
Non-Slip Pads
- 7 X
2 3
Screw M5 x 50mm
- 12 X
Nut - 28 X
76 8 9
5
Allen Key (M5)
- 1 X
Screw M3 x 20mm
- 40 X Screw M4 x 30mm - 16 X
Screw M5 x 50mm
- 28 X
10
11
4
Adjustable Foot
- 4 X
12
Slat Cap - 32 X
Middle Cap For
Sprung Base - 16 X
Bolt M8 X 45mm
+Flat Washer Bolt
- 8 X
13
Non-Slip Pads
40 x 75mm - 4 X
14
Screw M5 x 70mm
- 3 X

04

STEP 1
STEP 2
Please note that
the Bolt (1) x 16
are prefixed into
parts A & B
STEP 3
P
P
P
3
A
B
A & B
X12
X16
1
5
05
E
E
E
D
E
D
14
E
X3 X3
2
2
X4 A & B
P
13
13

STEP 4
Slot into bracket behind fabric
PULL
STEP 5
STEP 7
STEP 6
face out
X32
D
X 2
5
10
C
F
4
X 8
12
06
C
C
PUSH
12
12
G
G
11
PUSH
PUSH
G
12 12
G
11 X16
X16
11
G
face out
ARROWS ON LABELS
POINT TO EACH OTHER
4
2
2
X 4

Important:
Make sure when you fit the nuts
that the hole is in the correct
alignment.
STEP 11
STEP 8 Drawer Assembly.
FOLLOW LINE ON BACK OF
DRAWER FACE PANEL
STEP 10
STEP 9
III III
J
7
6
I
J
I
K
I
I
L
6
M
N
M
N
M
6
10
8
H
H
9
J
X40
07

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes
When correctly adjusted the centre support legs on this product should be raised by
5mm from the floor with the added weight of the mattress and bedding.
his bed may fail if it is used on a wooden floor WTITT HOUTUUUUUUUUUUUUU Tthe use of non-slip pads
on all support legs and bed posts.
If the bed is to be moved, carefully lift the product rather than dragging to ensure
that the centre legs do not become twisted and buckle.
U