Happy Beds Chantelle Daybed with Trundle User manual

ASSEMBLY INSTRUCTIONS
CHANTELLE DAY BED WITH TRUNDLE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING
YOUR CHANTELLE DAY BED WITH TRUNDLE FRAME
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
HEALTH & SAFETY
DO NOT jump on this bed frame
DO NOT use this bed frame if any parts are missing, damaged or worn
DO NOT use this bed frame unless all fixings are secured
Please keep small parts out of reach of children
Always use on a level, even surface
WARNING: If this bed is placed on a non-carpeted floor you must place some protection
under all legs to stop the bed frame from moving. If this is not adhered to there is no
guarantee if the bed frame collapses.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com
Page 1 of 4
Vendor: S000053
Birlea
Suppliers of Inspiration

Vendor: S000053
A
01
B
01
C
02
02
02
D
E
F
G
H
I
J
M6 x 16mm JCBC Screw
M6 x 45mm JCBC Screw
M6 Nut
Slat Cap
Finial
DescriptionBox
HARDWARE LIST (BOX 1)
Part
**M4 ALLEN KEY SUPPLIED
PART LIST
Part
01
02
03
04
05
Description
Left Frame
Right Frame
Side Support
Back Rest
Mid Support
10
02
04
02
24
Qty
01
01
01
01
01
Qty
0106 Slat 12
0307 Trundle Base 01
0308 Trundle Leg 02
STEP 1: Fix the Side Support (3) to the Left Frame (1) and Right Frame (2) using hardware part (A) but do not fully tighten the
screws yet until Step 2.
DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM.
1
2
2
3
A
A
A
A
3
Allen Key
Page 2 of 4
Birlea
Suppliers of Inspiration
4
7
2
3
5
6
1
8
M6 x 40mm JCBC Screw
M6 x 50mm JCBC Screw
M6 Hex Lock Nut
50mm Nylon Wheel
10mm Spanner
04
04
08
04
01

STEP 3: Attach the Mid Support (5) using hardware parts B and C.
DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM.
Page 3 of 4
STEP 4: Place hardware part (D) onto each Slats (6) and press firmly into the Side Supports (3) & Back Rest (4). Finally, insert
hardware part (E) to the Left Frame (1) and Right Frame (2).
DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM.
4
5
3
B
B
C
C
Birlea
Suppliers of Inspiration
STEP 2: Attach the back rest (4) using hardware part A. At this point, fully tighten all the screws.
DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM.
1
2
4
A
A
A
A
A
A
E
E
E
E
6
D
6
Vendor: S000053

Page 4 of 4
Birlea
Suppliers of Inspiration
STEP 5: Attach the Trundle Legs (8) to the Trundle Base (7) using hardware parts (F) and (H)
DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM.
STEP 6: Fix hardware part (I) to the Trundle Legs (8) using hardware parts (G) and (H)
DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM.
Vendor: S000053
H
G
H
F
J
7
8
SpannerSpanner
8
7
I
J
STEP 7: Hook the bar to the Trundle Leg (8) to lock it when in the open position.
DO NOT USE ANY POWER TOOLS AS THIS MAY DAMAGE THE FRAME AND WILL INVALIDATE ANY CLAIM.
Hook the bar to the
leg whenever in the
open position
Additional Information:
For complete product information, images and dimension diagrams please visit the website
www.birlea.com
If you have any issues with your item please contact the retailer directly you purchased it from who will be
able to resolve any issues with Birlea.
Why don't you send us photos of your assembled furniture to [email protected] to be shared in our
#birleahome feature on Instagram.
8
7
Allen Key
SpannerSpanner
Allen KeyAllen KeyAllen Key
Spanner
Spanner