Happy Beds ARIEL Fabric Chair User manual

Title of Product
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
ARIEL Fabric Chair

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

Ariel chair
For Care and Maintenance of your chair...
Do not push or pull this chair as it will cause
damage.
Always lift this chair with a second person to
prevent damage or injury.
Keep any sharp objects away from this chair.
Please don’t not jump on this chair.
Do not use this chair if you find missing,
damaged or worn parts. Please contact your
Please do not use this chair until you have
fully secured all fixings.
retailer.
Please ensure this chair is on an even, level
surface.
If your desired room of choice has a non-carpeted surface please ensure that you ues some form of
protection and do not place directly on the wooden floor. This will prevent the chair from moving and
therefore collapsing which will void your guarantee..
chair

A.Chair Frame(x1) B.Legs (x4) C.Screw (x16) D.Allen Key (x1)
Remove all accessories which are stored under the seat cushion then turn the 1 x chair frame (A)
over to access the bottom of the product. Attach 2 x legs (B) to the front corners of the Chair and
2 x legs (B) to the back corners of the chair using 4 x screw (C) and 1 x Allen Key (D).

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the product across the
floor as this will cause damage to the joints. If the product is used on hard flooring, such as
wood or laminated floor, you must place some protection under the legs to stop the product
from moving. If this is not adhered to, it could result in failure to the product that will invalidate
the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes